某军用直流电源的RET方法研究

可靠性强化试验(RET)是一种新兴的试验技术,它使用在产品的设计阶段,用于快速暴露产品的缺陷和薄弱环节。以某军用直流电源为例介绍了可靠性试验方法,并对可靠性强化试验方法的优越性进行了讨论。     

Dough mixing and breadmaking properties of quinoa-wheat flour blends

Flour blends of quinoa-wheat containing 0, 5, 10, 15, and 20% of manually dehulled quinoa meal or flour were evaluated for dough mixing and breadmaking properties and liking of the bread by a small panel. Increasing amounts of quinoa meal or flour increased farinograph absorption and dislike of bread for most of the panel. Dough development time increased with increase in meal but decreased with increase in quinoa flour. At 10% inclusion levels differences in liking from control 100% wheat flour bread were smaller for flour or water extracted meal to most of the panel, than with 10% non-extracted meal. This suggests that 10% inclusion of flour or water extracted meal may have potential for further investigation.     

基于二维直方图分析的二元子图微光图像增强处理

提出了基于二维直方图分析的二元子图微光图像增强处理算法，根据原始图像的二维直方图分布特征，依据相邻像素的相关性数据，将图像分割成二元子图像，对每个子图像分别进行直方图均衡增强处理，最后合成得到完整的处理图像，通过用信息容量等图像评价参数对实验结果进行分析，表明此算法克服了对整幅图像进行直方图均衡时难以把握局部细节的缺点，得到了具有较好视觉质量的处理后微光图像。     

二元复合驱阶段见效特征

针对孤东油田油藏条件，通过室内试验研究，确定了以胜利石油磺酸盐为活性剂主剂和聚合物的二元复合驱油体系，通过两者之间的协同效应，增加水驱波及体积和洗油效率。该体系在孤东油田七区西馆上54—61层进行试验，取得了较好的阶段性降水增油效果。本文分析了复合驱见效特征和影响见效因素，为下步跟踪分析调整具有指导意义。     

Study of miscibility enhancement in poly(styrene‐co‐4‐vinylphenol)/poly(ethylene oxide) blends by the spin labelling method

The electron spin resonance (ESR) spectra of end‐group spin labelled poly(ethylene oxide) (SLPEO) using 2,2,6,6‐tetramethyl‐piperdine‐1‐oxyl nitroxide and its blends with poly(styrene‐co‐4‐vinylphenol) (STVPhs) of different hydroxyl contents were recorded over a wide temperature range. For a blend of SLPEO and pure polystyrene (PS), the ESR spectrum was composed of a single motion component, indicating that PS was immiscible with PEO. For blends composed of SLPEO and different‐hydroxyl‐content STVPhs, two spectral components with different motion rates were observed over a certain temperature range. The difference between the motion rates should be attributed to micro‐heterogeneity in the blends, with the faster rate corresponding to a nitroxide radical motion trapped in the PEO‐rich domain and the slower rate corresponding to a nitroxide radical motion trapped in the STVPh‐rich domain. Variations in the values of a number of the ESR parameters (T_a, T_d and T_50G) and the apparent activation energy (E_a) with hydroxyl content in the blends indicated that the miscibility of the blends increased with increasing hydrogen‐bonding density due to specific interactions between the hydroxyl groups in STVPh and the ether oxygens in PEO. Copyright © 2004 Society of Chemical Industry     

The effect of ionic interaction on the miscibility and crystallization behaviors of poly(ethylene glycol)/poly(L‐lactic acid) blends

The effect of end groups (2NH₂) of poly(ethylene glycol) (PEG) on the miscibility and crystallization behaviors of binary crystalline blends of PEG/poly(L ‐lactic acid) (PLLA) were investigated. The results of conductivity meter and dielectric analyzer (DEA) implied the existence of ions, which could be explained by the amine groups of PEG gaining the protons from the carboxylic acid groups of PLLA. The miscibility of PEG(2NH₂)/PLLA blends was the best because of the ionic interaction as compared with PEG(2OH, 1OH‐1CH₃, and 2CH₃)/PLLA blends. Since the ionic interaction formed only at the chain ends of PEG(2NH₂) and PLLA, unlike hydrogen bonds forming at various sites along the chains in the other PEG/PLLA blend systems, the folding of PLLA blended with PEG(2NH₂) was affected in a different manner. Thus the fold surface free energy played an important role on the crystallization rate of PLLA for the PEG(2NH₂)/PLLA blend system. PLLA had the least fold surface free energy and the fast crystallization rate in the PEG(2NH₂)/PLLA blend system, among all the PEG/PLLA systems studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Measuring interdiffusion at an interface between two elastomers with tapping-mode and contact-resonance atomic force microscopy imaging

Despite the common use of tapping-mode atomic force microscopy to image composites or polymer blends, very few studies have focused on the measurement of the interdiffusion at an interface between two polymers in contact. In this study, we show how to assess the interphase between two polymers with two methods. First, stable and robust tapping conditions are established, and the problem of the phase contrast is discussed. Second, a contact-resonance method is presented: the tip in contact with the sample is electrostatically excited at its resonance frequency by a self-controlled oscillator. The gain and frequency images allow us to measure the interdiffusion width. Both methods (using high and weak mechanical solicitation) give the same assessment of the interdiffusion width. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Anion Sensing Porphyrin Functionalized Nanoparticles

Disulfide and dithiocarbamate functionalized porphyrins have been synthesized and used as protecting ligands for gold nanoparticle formation either via ligand substitution reactions or by direct synthesis. These nanoparticles have been shown to recognize anions via changes in the absorbance spectrum of the surface adsorbed porphyrin moieties. Association constants, derived from quantitative titrations, indicate a remarkable surface enhancement effect where the surface bound porphyrins bind anions much more strongly than the free receptor in solution.     

Pulsating Jet Impingement Heat Transfer Enhancement

This article presents results from a numerical study of pulsating jet impingement heat transfer. The motivation is to seek conditions offering a significant enhancement compared to steady flow impingement drying. The CFD software package FLUENT was used for simulating slot-type pulsating jet impingement flows with confinement. The parameter study included velocity amplitude ratio, mean jet velocity, and pulsation frequency. The distance from nozzle exit to surface was three times the hydraulic diameter of the nozzle. The Reynolds number based on the nozzle hydraulic diameter and jet temperature was 2,460 with a mean jet velocity of 30 m/s, which is the base case of the numerical experiments. Results showed that time-averaged surface heat transfer increased with increasing velocity amplitude for the same mean jet velocity. Large velocity amplitudes helped enhance heat transfer by two mechanisms: high jet velocity during the positive cycle and strong recirculating flows during the negative cycle. For the cases with different mean jet velocities but the same maximum velocity, time-averaged surface heat flux decreased with decreasing mean jet velocity. As for the effects of pulsation frequency, with high-velocity amplitude ratio, time-averaged surface heat fluxes were at the same level regardless of frequency. However, at low-velocity amplitude ratio, high frequency caused stronger recirculating flows resulting in greater heat transfer compared to the cases with a lower frequency.     

提高润滑油基础油氧化安定性的组合工艺

以生产润滑油基础油的老三套工艺为基础，开发了改善油品氧化安定性的组合工艺。该工艺的主要特点是包括一步络合脱氮过程。实验证明，该组合工艺既可以有效地提高基础油的氧化安定性，又能降低溶剂精制深度，提高基础油收率。