85W／90卡车手动变速箱油的研制

介绍８５Ｗ／９０卡车手动变速箱油的组分和添加剂，提出符合８５Ｗ／９０粘度级别的基础油，讨论影响８５Ｗ／９０卡车手动变速箱油性能的各种因素，给出符合８５Ｗ／９０卡车手动变速箱油规格的油品配方。     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

A numerical model for the dissolution of spherical particles in binary alloys under mixed mode control

A general numerical model is described for the dissolution kinetics of spherical particles in binary systems for any combination of first order reactions at the particle-matrix interface and long distance diffusion within the matrix. The model is applicable to both finite and infinite media and handles both complete and partial particle dissolution. It is shown that interfacial reactions can have a strong effect on the dissolution kinetics, the solute concentration at the particle-matrix interface and the solute concentration profile in the matrix.     

Recrystallization/precipitation behaviour in microalloyed steels

Microalloyed high-strength low-alloy (HSLA) steels contain additions of Nb, V, Ti, or in combination, in amounts of 0.01 to 0.1 weight percent to improve mechanical properties, which are strongly dependent on the thermomechanical interaction taking place in the course of rolling mill processes. The recrystallizatian of hat-twisted austenite has been investigated in a cylindrical specimen (f 6×50 mm) machined from hat rolled plates of 0,052 wt % Niobium microalloyed steel. Continuous and interrupted torsion test were carried out in the temperature range 1123 K to 1173 K after a solution treatment of 1.5 minutes at 1423 K and torque-twist data were analysed. The various methods were discussed for obtaining results from torsion tests. The effect of precipitation kinetics was appreciated by way of connection t_p/t_p(red), where t_p is the experimental measured time for the peak stress and t_p(red) is the newly defined reduced time. The softening ratio X and time t_0.05R for start of static recrystallization were established.

The correlation between precipitation and recrystallization is presented as a graphs for chosen requirements (temperature of austenitization, carbon and niobium content and strain rate). If temperature goes below 850°C, the restoration processes are hardly suppressed, both are limited by diffusion and Nb(CN) precipitation, which are extended dynamically in the range of strains rates 10⁻² to 1 s⁻¹.

In the present paper, an attempt is made to derive the PRTT diagram and to define all mathematical equations for describing recrystallization times t_0.05R, t_0.5R, t_0.95R and t_0.05P for the start of precipitation. In real metal forming processes such as the hot rolling of plates or strips the knowledge of these parameters and results is extremely important for the the correct microstructure and sheet quality to be obtained.     

A bidding decision index for construction contractors

Results from applying the model on a sample of contractors, the majority of whom were international and operating in Egypt, reinforces the credibility of the developed methodology, claim the authors.     

气体绝缘封闭电器的高速瞬变过程和现场试验

随着ＧＩＳ的工作电压不断提高和发展，一系列新的现象和问题也同时出现。从国外一些科研，设计，制造部门所研究发表的内容看，大致有隔离开关操作和高速瞬变过程，粒子影响和对干扰定位的技术，元件的监督，现场试验等课题，本文对以上问题加以综合介绍。     

基于STEP的零件加工工艺计划模型

为了满足ＣＩＭＳ环境下工艺系统与其它系统集成的需要，建立了标准工艺计划模型具十分重要的意义。本文描述了一个基于ＳＴＥＰ的零件加工工艺计划模型，介绍了建立这一模型的关键技术，给出了参照ＳＴＥＰ建立工艺计划模型的方法。     

转炉炼钢静态模型的初步探讨

根据转炉炼钢的物理化学反应机理，从质量平衡和能量平衡的计算出发，通过小参数变动，导出了增量式静态模型中矿石方程和供氧方程的系数。所得结论与新日铁资料基本相符。同时，还进行了炉料和产物的计算，分析了改变废钢比对生产的影响。     

Prediction of liquid–liquid phase diagrams of aqueous salt+PEG systems using a thermodynamic model

In this study a thermodynamic model for the phase behavior of aqueous salt+polymer solutions is developed. The model is based on the solution theory of Hill, which included scaling laws for the polymer molecular mass dependence and Pitzer–Debye–Hückel theory. This model was tested for systems composed of two different molecular mass of polyethylene glycols (PEG) and five different inorganic salts. All the model parameters were determined from independent measurements. The agreement between the experimental and predicted phase diagrams by this model is good.     

200 万t链箅机-回转窑球团生产线快速达产实践

介绍了邯钢200万t链箅机-回转窑酸性氧化球团生产线的工艺特点和主要设备,以及建成投产后试生产的有关情况。通过周密的部署和安排,该生产线实现了40天快速达产的目标。