��Ѩ���´����⽨�⼼��

我国的西气东输工程从新疆塔里木油田到上海，管线长度达4000公里，为确保对长江三角洲地区安全稳定的供气，就必须在长江三角洲地区建设地下储气库，从而保证在管线故障期间应急供气，同时利用地下储气库调节冬季和夏季用气量的差异，保证长输管线的高效、平稳运行。在长江三角洲地区经地库址选择，目前准备将常州盆地的金坛盐矿用以建设地下储气库。盐穴地下储气库主要选择在盐层或盐兵上，利用水溶方式形成地下溶腔进行储气，选择合适的建库地址要结合地质、水、工程等诸多因素，造腔过程中需要采取一系列控制技术，在造腔过程中还要及时采取声纳测井技术进行跟踪监测，造腔过程的检测及腔体完成后的密封安全性检测是气库能否投入运行的关键。     

转炉入炉铁水温度低的原因分析及其对炼钢的影响

系统分析了新钢公司一钢厂转炉入炉铁水温度低的原因及铁水温度对炼钢的影响，提出了提高铁水温度的措施及转炉应对低温铁水的办法。     

Preparation of the TiB2 coatings by electroplating in molten salts

The improvement of titanium diboride (TiB₂) coatings over the molybdenum substrate was investigated by comparing the electrochemical techniques of continuous current plating (CCP) and periodically interrupted current (PIC). The solvent used was a eutectic Flinak mixture (LiF-NaF-KF, 46.5:11.5:42 molar ratio) with solutes K₂TiF₆ and KBF₄ with the electrochemically-active components in the molar ratio of one to five. The coatings produced by PIC show improvements in morphology and microstructure for the suitable conditions: i = 0.5 A/cm², frequency = 100 Hz, the time ratio t_c/t_off (current on/current off) = 4/1. X-ray diffraction (XRD) analyses indicated that the coatings are composed of the relatively pure TiB₂ and the preferred orientation is [001] + [110], which is in accordance with the prediction of the two-dimensional crystal nuclei theory.     

钢水化学热法升温技术的研究

依据热力学原理，用计算机计算了某些元素与合金的氧化热效应。综述了各种上化学热法升温技术的应用效果。分析讨论了发热剂的类型，升温速度和热效率问题等。     

Charge density dependence of elastic modulus of strong polyelectrolyte hydrogels

The mechanical behavior of a series of strong polyelectrolyte hydrogels based on acrylamide and 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) was investigated. The hydrogels were prepared at a fixed crosslinker ratio and monomer concentration, but at various charge densities, i.e. AMPS contents between 0 and 100 mol%. The elastic modulus of the hydrogels after their preparation first increases with increasing charge density but then decreases continuously. Investigation of the swollen state properties of the hydrogels shows existence of a large number of ionic groups inside the gel that are ineffective in gel swelling. The results indicate two opposite effects of charged groups on the elastic modulus of the hydrogels: formation of multiplets acting as additional crosslinks in the gel increases the elastic modulus of ionic hydrogels, whereas the effect of the electrostatic interaction of charged groups on elastic free energy decreases the modulus.     

粉状阳离子聚丙烯酰胺的研制

用聚丙烯酰胺胶体,在≥20％浓度的硫酸盐溶液中,进行Mannich反应,经真空干燥后,制取水溶性阳离子型高分子。初步探讨了盐浓度、温度、时间、配比对产物的阳离子度、溶解性的影响。     

Photoinitiated cationic polymerization using a novel phenacyl anilinium salt

A novel phenacyl anilinium salt, N-phenacyl, N,N-dimethylanilinium hexafluoroantimonate, (PDA), has been synthesized and used as photoinitiator for cationic polymerization of cyclohexene oxide (CHO), butyl vinyl ether (BVE) and N-vinyl carbazol (NVC). Plausible mechanism of the photoinitiation involves the decay of the excited PDA with both heterolytic and homolytic cleavages of carbon-nitrogen bond. Thus, phenacylium cations formed directly or subsequent intermolecular electron transfer, respectively, initiate the polymerization.     

察尔汗盐湖镁资源的开发及展望

察尔汗盐湖不仅具有丰富的镁资源，而且具有开发盐湖的能源，政策优势，由脱水氯化镁可制得多种镁产品。氯化镁脱水技术，氯化镁制金属镁技术是综合开发盐湖水镁资源的关键技术，将纳米技术应用于盐湖镁资源的开发，使镁产品高值化，精细化，将是察尔汗盐湖镁资源的开发方向。     

OPS和OPC系列稠油乳化降黏剂的研制

以工业品烷基酚聚氧乙烯醚OP-n（n=4,6,8,10,15）为起始原料,合成了烷基酚聚氧乙烯醚乙酸盐OPC-n和磺酸盐OPS-n两个系列的阴-非离子表面活性剂。以酸值和黏度不同的胜利单家寺和陈庄稠油为实验油样。将OPC-n和OPS-n溶于矿化度5811 mg/kg的胜利标准盐水和NaCl、CaCl2盐水中作为水相,按油、水质量比7∶3在50℃用玻棒搅拌混合,观察是否形成水包油乳状液并测黏度进行确认。在胜利标准盐水溶液中,OPC-n和OPS-n乳化稠油所需的最低质量分数,随稠油、表面活性剂类型及氧乙烯链节数n而变,一般而言,OPC-n系列中的OPC-8和OPS-n系列中的OPS-4乳化稠油的性能最好,该最低质量分数值分别为0.05%或0.025%和0.025%。在NaCl盐水溶液中,OPC-n的该最低质量分数值与稠油和n有关,均随盐含量增加而增大,在盐含量≤15%时,抗盐性最好的OPC-8和OPC-10的该值≤0.05%;OPS-n的抗盐性好于OPC-n。OPC-n的抗钙性良好,钙盐含量为2%时该最低质量分数≤0.1%;OPS-n的抗钙性更好,钙盐含量为2%和3%时该最低质量分数仅为0.025%或0.05%。表6参5。     

无机熔盐中脉冲铝镀层的研究

在190℃的AlCl3-NaCl—KCl共融盐中，对321型不锈钢板进行脉冲镀和直流镀。在钢板上获得银白色铝镀层。X射线衍射结果表明，两种情况均得面心立方结构的铝，但由脉冲镀所得的铝晶粒较小。对镀层进行性能测试分析。发现同为厚10μm的铝镀层，脉冲镀层硬度比由直流镀层高65HV，且脉冲镀层在耐蚀性和与不锈钢基体的的结合力上明显优于直流镀层.