考虑天然气混氢的园区综合能源系统电制氢优化配置

电制氢和天然气混氢技术在促进可再生能源消纳、降低系统碳排放量方面具有良好的理论研究和工程应用前景。面向含高比例可再生能源的园区综合能源系统,提出一种计及天然气混氢及跨季节存储的电制氢优化配置方法。首先梳理了含氢园区综合能源系统的运行框架和能量流动关系,建立园区内部能源生产、转换与存储设备的数学模型,其次以设备的年化投资成本、园区综合能源系统的年度运行成本和碳交易成本最优为目标,提出电制氢优化配置模型。最后通过算例分析表明电制氢及天然气混氢技术的引入可提升可再生能源的消纳能力,降低系统的整体经济成本和碳排放量,并分析了电解槽投资成本、混氢体积分数上限以及经济性和低碳性成本权重系数变化对规划运行结果的影响。关键词：园区综合能源系统;电制氢;天然气混氢;碳交易;跨季节储氢;优化配置 中图分类号：TM732     

Pb(Zr0.52Ti0.48)O3 nanotubes synthesis and infrared absorption properties

Herein a useful methodology to synthesize the lead zirconate titanate (PZT) nanotubes via a dip-coating deposition process with anodic aluminum oxide (AAO) template is proposed. The nano-porous AAO templates were produced using a controlled two-step electrochemical anodization technique. The PZT/AAO composite was formed using the dip-coating wetting technique. The prepared PZT precursor solution was driven into the nanopore channels of AAO template under the driving force of capillary action, subsequently the sintering process of the as-filled templates was carefully tuned to obtain Pb(Zr_0.52Ti_0.48)O₃ nanotubes of crystalline tetragonal phase with uniform pore size and ordered arrange. Fourier transform infrared spectroscopy (FTIR) results show that in the 1200–1900 cm⁻¹ band, the composite structure of PZT/AAO has obvious absorption peaks at 1471.56 cm⁻¹ and 1556.09 cm⁻¹, the absorption intensity of the composite structure is about six times of pure AAO template. The unusual optical properties found in PZT/AAO composite will stimulate further theoretical and experimental interests in ferroelectric nanostructures.     

A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

Characterization and evaluating the mechanical performance of halloysite nanotubes reinforced acrylonitrile butadiene styrene/polycarbonate composites exposed to aggressive environmental conditions

Developing light weight polymer based composites dispersed with novel reinforcements which can function well in the presence of aggressive environments is an active research field in the materials engineering. Hence, in the current work, halloysite nanotubes (1 %, 2 %, 4 %, 6 %, 8 % and 10 % by weight) were reinforced into acrylonitrile butadiene styrene/polycarbonate blend and the role of reinforcing phases on the mechanical performance under aggressive environmental conditions has been evaluated. Hardness was measured as gradually increased in the composites with the increased content of the reinforcements. Impact strength of the composites was observed as increased in the composites up to 4 % reinforcement and further decreased. Increased strength was measured for the composite up to 2 % reinforcement. Ductility of the composites was decreased as reflected form the decreased % of elongation with the higher fraction of reinforcements due to induced brittleness. The composites were exposed to diluted sulfuric acid for 3 h and 6 h at 60 °C and then subjected to tensile loading. With the increased time of exposure, composites with 1 % and 2 % reinforcement exhibited relatively better performance.     

纳米碳中的微观缺陷结构特征

测定了定向石墨和纳米碳的正电子寿命谱,结果表明,热解法制备的纳米碳存在开空间小于单空位的自由体积以及开宽间相当于约１０个空位聚集体全的微孔洞,比较了热解法制备的纳米碳,ＵＦＰ冷压法制备的纳米Ｆｅ和纳米ＴｉＯ２以有非晶晶化法制备的纳米ＮｉＰ的缺陷结构特征,结果为纳米ＮｉＰ中缺陷的电子密度最高,纳米Ｆｅ和纲米ＴｉＯ２次之,纳米碳的最低,纳米碳中的缺陷浓度最高,纳米Ｆｅ和纳米ＴｉＯ２的次之,纳米ＮｉＰ的     

Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors

A new approach for building a bio-conductive interface for enzyme immobilisation is described. This strategy permits very simple preparation of the enzyme biosensor and also reveals direct electron transfer features. A graphite-epoxy resin composite (GrEC) electrode modified with functionalised multi-wall carbon nanotubes (MWCNTs) immobilised by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide together with N-hydroxysuccinimide (EDC–NHS) in a chitosan (Chit) matrix was prepared and characterised by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of hexaammineruthenium (III) chloride. It was then used as a base for glucose oxidase (GOx) immobilisation by the simple method of crosslinking with glutaraldehyde (GA) with bovine serum albumin (BSA) as carrier protein. The resulting mediator-free biosensor was applied to the determination of glucose in amperometric mode at different applied potentials and the mechanism of reaction was also investigated by cyclic voltammetry, with and without dissolved oxygen in solution. Analytical parameters, as well as reproducibility, repeatability and stability were determined. Interferences were assessed using different compounds usually present in natural samples, such as wines, juices or blood, in order to evaluate the selectivity of the developed biosensor. The novel combination of carbon nanotubes immobilised with chitosan crosslinked with EDC–NHS and glucose oxidase immobilised by crosslinking with glutaraldehyde offers an excellent, easy to make biosensor for glucose determination without interferences.     

Ion-cyclotron resonance study of elementary stages of the catalytic oxidation of CO by N2O in the presence of VIA-group metal ions

Gas phase reactions of Mo⁺ and W⁺ ions with the molecules of various oxidants (NO, O₂, N₂O, CH₂O, C₂H₄O) were studied using ion cyclotron resonance. In oxidation with N₂O the mono-, di- and trioxide metal cations are formed consecutively. The trioxide MO₃ ⁺ ions of both metals react with CO to form CO₂ and MO₂ ⁺ ions. In this way, catalytic reaction N₂O + CO N₂ + CO₂ occurs in the gas phase with MoO₃ ⁺ /MoO₂ ⁺ and WO₃ ⁺/WO₂ ⁺ couples as catalysts. The rate constants have been measured for both stages of the catalytic cycle as well as for the stages of the catalyst preparation. Metal-oxygen bond energies were estimated for MoO_x ⁺ and WO_x ⁺ species with various x. The mechanism of CO oxidation with MoO_x ⁺ and WO_x ⁺ cations as catalysts in the gas phase is discussed in comparison with that for the oxidation over classical solid oxide catalysts.     

不锈钢活性炭滤器的氯腐蚀与防腐

本文就活性炭在预处理中脱氯的不锈钢滤器的氯腐蚀机理进行了探讨，并提出了不锈钢活性炭脱氯滤器的防腐方法和措施。     

石墨粒度对低炭镁炭砖性能的影响

以电熔镁砂和4种粒度(≤0.149mm、 ≤0.074mm、≤0.044mm和≤0.01mm)的天然鳞片 石墨为主原料,在石墨含量为4%的条件下,研究了 石墨粒度对低炭镁炭砖的物理性能、抗氧化性和热震 稳定性的影响。结果表明:用细石墨取代较粗石墨 (粒度≤0.149mm)制成的镁炭砖,其物理性能、抗氧 化性和热震稳定性都有了明显的改善,且都以加入粒 度≤0.074mm石墨的效果最好。其原因是细石墨的 加入改善了镁炭砖的基质结构。石　墨     

A method for observing the three-dimensional morphologies of inclusions in steel

A method for observing the three-dimensional morphologies of inclusions by deeply eroding a steel sample with a kind of organic solution composed of bromine water,acetone,and HC1 (volume ratio,45∶45∶10...