二郎山滑坡坡脚挡墙破坏及修复技术研究

二郎山1号滑坡位于龙胆溪左岸,滑坡前缘采用了坡脚挡墙防冲刷工程,10 a之后位于龙胆溪凹岸部分坡脚挡墙破坏。针对坡脚挡墙破坏形成的原因,对比分析了目前常用冲刷防护结构的局限性,提出了采用台坎式挡墙新组合结构进行修复,组合结构主要由挡土墙、墙底抗滑键、墙脚台坎以及耐磨肋组成。介绍了组合结构设计计算方法,并通过造价分析说明台坎式挡墙结构与其它防冲刷相比在经济上具有明显优越性,可为其它同类地质灾害防治提供参考。     

磷钨杂多酸催化剂制备工艺的放大研究

采用经典酸化-乙醚萃取法制备Keggin结构的磷钨杂多酸,在前期优化实验基础上,制备规模放大20倍进行工艺研究,以考察放大效应.实验得到最佳的制备工艺条件为:钨酸钠250 g,磷酸氢二钠40 g,加酸量为160 mL,在85 ℃的温度下反应2.5 h,磷钨酸的收率达到89.3%.并运用红外光谱(IR)、X射线衍射(XRD)、热重分析(TG-DSC)和Hammett指示剂法对最佳工艺制得的磷钨杂多酸进行了结构表征和酸性表征,结果表明制得的产品是Keggin结构且具有很强的酸性;以混合二元酸(丁二酸、戊二酸、己二酸)与正丁醇的酯化反应为探针反应,酯化率为衡量标准对催化剂进行性能表征,结果表明其对酯化反应具有很好的催化活性,放大后无明显的放大效应.     

莫来石晶种对反应烧结ZrO2/莫来石复相陶瓷显微结构的影响

通过显微结构观察研究了莫来石晶种对反应烧结ZrO2/莫来石复相陶瓷显微结构的影响。研究结果表明：与不含晶种试样相比，添加Ma(d50=1.87μm)和Mb(d50=0.83μm)晶种试样的显微结构比较均匀，莫来石晶粒多呈等轴状，且大小均一，晶内型ZrO2和封闭气孔较少。添加晶种对莫来石晶粒有明显细化作用。但晶种添加量和晶种颗粒尺寸对反应生成莫来石的晶粒尺寸无明显影响。采用溶胶－凝胶法制备的莫来石晶种（Mc)使试样中长出了一定量的长柱状的莫来石晶粒。     

基于1H NMR测定和基团贡献法预测石油馏分的热化学性质

测定了两种原油 2 0个石油馏分的¹H NMR谱和氢、碳元素含量等结构参数 ,以及馏分的燃烧焓、蒸发焓等热化学性质 .假设每个石油馏分仅由CH₃ 、CH₂ 、CH、ACH和C这 5种简单基团构成 ,基于¹H NMR测定和元素分析结果解出石油馏分平均分子结构中的基团数目 ,再用纯有机物的基团贡献法预测石油馏分的燃烧焓、蒸发焓 ,预测值与实验数据吻合良好     

高氯酸化三邻菲啰啉合铜(Ⅱ)的合成及晶体结构

合成了过渡金属元素Cu与1,10-邻菲啉的配合物并进行了元素分析、红外光谱等表征,测定了配合物的晶体结构。配合物组成为[Cu(phen)3](ClO4)2,属于单斜晶系,P2(1)/n空间群。配合物中金属离子Cu2+处于N6的配位环境,配位构型为六配位的拉长八面体。     

聚酰胺共混物的结构与性能

就近年来国内聚酰胺共混物的形态结构、相容性、流变行为、力学性质四方面的研究进展作一综述。     

On the hierarchy of the influences of porous and electronic structures of carbonaceous materials on parameters of molecular storage devices

The relation between porous structure, electronic properties of carbonaceous material and the capacitance of its interface with an electrolyte is discussed. It is shown that, in an electric double-layer, the contribution of pseudocapacitive charge accumulation is determined, mainly, by the position of Fermi level in the carbonaceous material and depends on thermodynamic parameters of ions in the electolytic solution. The sizes of the pores in which the processes of capacitive and pseudocapacitive charge accumulation dominate are determined. Theoretical analysis of the processes taking place on the nanoporous carbon|electrolyte interface has made it possible to recognize the intercalative nature of pseudocapacity and to find the criterion of its manifestation in the form of the formation of a continuous series of stable valency phases.     

EIS and GITT studies on oxide cathodes, O2-Li(2/3)+x(Co0.15Mn0.85)O2 (x=0 and 1/3)

Li ion kinetics in the O2-phase layered manganese oxides, Li_2/3(Co_0.15Mn_0.85)O₂ (O2(Li)) and Li_(2/3)+x(Co_0.15Mn_0.85)O₂ (x=1/3 (O2(Li+x))), has been studied by the electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) at room temperature and the results were correlated with the observed cathodic behaviour. Both compounds show a reversible capacity of ∼180 mA h/g at low current density (∼5 mA/g). EIS studies as a function of cycle number show an increased contribution of resistance associated with surface film formation and bulk contribution which is in agreement with the increased capacity fading observed in O2(Li+x) after 10-15 cycles. The Li ion diffusion coefficient (D_Li) vs voltage plots show minima during the first charge cycle coinciding with the irreversible plateau of the voltage vs capacity profiles reflecting the irreversible phase change in both the compounds. The values of D_Li (GITT method) observed for the second and subsequent cycles (≤6) in the full voltage range (3.0-4.4 V) are 2×10⁻¹¹-10×10⁻¹¹ cm²/s for O2(Li+x) and 0.5×10⁻¹⁰-3.0×10⁻¹⁰ cm²/s for O2(Li). Variation of D_Li as a function of cycle number (up to 35) indicates that, in addition to the interface kinetics, changes in the D_Li values with cycling also contribute to the capacity fading of the compounds, especially in O2(Li+x).     

Mechanical and dynamic mechanical properties of jute fibers–Novolac–epoxy composite laminates

A study was done of jute composite using a polymer matrix of epoxidized Novolac resin (ENR), diglycidyl ether of bisphenol A (DGEBA)–based epoxy, and their blends with different weight percentages of the resins. It was found that on blending ENR with DGEBA, the storage modulii at room temperature are enhanced by about 100% or more in the case of 30 and 40% ENR‐containing matrices, whereas the enhancement in the case of 20 and 12% ENR‐containing matrices is only 50% that of the pure matrix. It was also observed that the tan δ peak heights of the composites containing 30 and 40% ENR are closer to that of 20% ENR‐containing composite. The probable explanation drawn on the basis of experimental findings of DMA and mechanical analysis is that by blending ENR with DGEBA epoxy it is possible to manufacture jute composites with increased stiffness without sacrificing their ductility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2800–2807, 2002     

不同预处理条件下纤维素的结构变化及其在DMAc／LiCI中的溶解

介绍了乙二胺、氢氧化钠和高温等三种不同的纤维素预处理方法。研究预处理后纤维素的结构变化，讨论预处理过程中的转化机理，并通过X射线衍射对纤维素结晶度的变化进行表征，证明乙二胺预处理后纤维素的结晶度下降最大。纤维素经过预处理后可以溶解在DMAc／LiCI中，讨论其溶解机理，通过对比三种预处理纤维素的溶解性能，表明经过乙二胺预处理之后的纤维素在DMAc／LiCI中溶解性能最好，氢氧化钠预处理的纤维素次之，高温预处理的纤维素溶解性能相对较差。