Buckling analysis for delaminated composites using plate bending elements based on higher‐order zig‐zag theory

A finite element based on the efficient higher‐order zig‐zag theory with multiple delaminations is developed. The bending part of the formulation is constructed from the concept of DKQ element. Unlike conventional elements, a developed element has its reference in the bottom surface which simplifies zig‐zag terms on formulation. Exact patch solutions are developed on elements which have the bottom reference system. The present element passes proper bending patch tests in the arbitrary mesh configurations in isotropic materials. Zig‐zag formulation is adopted to model laminated plates with multiple delaminations. To assess the accuracy and efficiency of the present element based on higher‐order zig‐zag theory with multiple delaminations, the linear buckling problem of laminated plates with multiple delaminations has been analysed. The results have been compared with three‐dimensional elasticity solutions. The present element works as an efficient tool for analysing the behaviour of the laminated composites with multiple delaminations. Copyright © 2002 John Wiley & Sons, Ltd.     

Effect of crack-growth mechanism on the prediction of fracture load of adhesive joints

This paper presents observations regarding the cracking behavior of tensile-loaded structural adhesive joints. Experiments showed that fracture occurred by the development and propagation of a damage zone, rather than a single, sharp crack, and that the presence of the adhesive spew fillet did not affect the fracture load of the adhesive joints studied. For joints bonded with the mineral-filled epoxy Cybond 4523GB (American Cyanamid), there was approximately 5 mm of subcritical crack propagation prior to final fracture. Fracture-load predictions based on the initial uncracked geometry made in previous papers were unaffected by this small change in geometry. For joints bonded with the rubber-toughened epoxy Permabond ESP 310, approximately 50 mm of subcritical crack propagation was observed. It was again found that predictions made in previous papers on the basis of the initial geometry gave a good estimate of the final fracture load even though this subcritical crack propagation significantly altered the geometry, and thus the applied energy release rates. The effect of shear deformations of the adherends was also investigated, and it was found that shear deformations could be neglected in engineering calculations for joints subject to remote tensile loading.     

Transmit Diversity Schemes for WCDMA

Previous work on transmitter antenna diversity has shown that the use of multiple transmitter antennas at the base station results in improved performance due to increase of diversity (path diversity). This happens with no bandwidth cost, even when the signal quality along several paths is poor, but the receiver estimates the channel with accuracy. This paper evaluates the effects of channel estimation errors in the performance of the schemes designated as Space-Time Transmitter Diversity (STTD) and Selective Transmitter Diversity (STD). We consider low to medium signal to noise ratios characteristic of Wideband Code Division Multiple Access (WCDMA) networks. Different fading channel models are considered for comparison between the two schemes. The improvement due to convolutional coding associated with these techniques is also evaluated.     

两个基于身份的数字签名方案的安全性改进

分析了文献[1]提出的两个基于用户身份的数字签名方案，发现其一般签名方案存在安全性缺陷，在此基础上建立了多重签名方案，但此方案也是不安全的。本文给出了改进的签名和多重签名方案。     

Two- or three-stage least squares?

Two elements enter the choice between 2 and 3SLS for full-system estimation: statistical efficiency and computational cost. 2SLS always has the computational edge, but 3SLS can be more efficient, a relative advantage that increases with the strength of the interrelations among the error terms. A measure of these interrelations is thus helpful in making the choice, and, when there are only two equations, this has suggested using a high pairwise error correlation as an indicator of when to use 3SLS. In larger systems of equations, however, these pairwise correlations can remain small even though more general interrelations give 3SLS the relative advantage. More general indicators are therefore needed, and this paper suggests three such and demonstrates their efficacy.Professor of Economics, Boston College, and Principal Research Associate, Center for Computational Research in Economics and Management Science, MIT. All computation was done on the TROLL system at MIT. My thanks go to Josh Charap for his able research assistance. This research was sponsored in part by the National Science Foundation under grant #IST-8420614.     

多目标决策问题非支配解集的一种序列逼近方法

在多目标优化中,对非支配解集的估计是一项非常重要的工作.本文给出一种序列逼近非支配解集的方法.     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

Detection of multiple cracks using frequency measurements

A method for detection of multiple open cracks in a slender Euler-Bernoulli beams is presented based on frequency measurements. The method is based on the approach given by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841], transverse vibration modelling through transfer matrix method and representation of a crack by rotational spring. The beam is virtually divided into a number of segments, which can be decided by the analyst, and each of them is considered to be associated with a damage parameter. The procedure gives a linear relationship explicitly between the changes in natural frequencies of the beam and the damage parameters. These parameters are determined from the knowledge of changes in the natural frequencies. After obtaining them, each is treated in turn to exactly pinpoint the crack location in the segment and determine its size. The forward, or natural frequency determination, problems are examined in the passing. The method is approximate, but it can handle segmented beams, any boundary conditions, intermediate spring or rigid supports, etc. It eliminates the need for any symbolic computation which is envisaged by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841] to obtain mode shapes of the corresponding uncracked beams. The proposed method gives a clear insight into the whole analysis. Case studies (numerical) are presented to demonstrate the method effectiveness for two simultaneous cracks of size 10% and more of section depth. The differences between the actual and predicted crack locations and sizes are less than 10% and 15% respectively. The numbers of segments into which the beam is virtually divided limits the maximum number of cracks that can be handled. The difference in the forward problem is less than 5%.     

Vibrations of stretched damped beams under non-ideal boundary conditions

A simply supported damped Euler-Bernoulli beam with immovable end conditions are considered. The concept of non-ideal boundary conditions is applied to the beam problem. In accordance, the boundaries are assumed to allow small deflections and moments. Approximate analytical solution of the problem is found using the method of multiple scales, a perturbation technique.     

空爆毁伤地面机动目标扫描准则研究

文中主要针对多爆炸成型弹丸空爆战斗部,在分析区域识别和占空比识别两种不同扫描准则的基础上,应用蒙特卡洛方法计算了战斗部对目标的毁伤概率.通过仿真计算结果对比分析,获得了不同扫描准则对毁伤概率的影响,结果可为多爆炸成型弹丸空爆战斗部设计和选择使用扫描准则提供参考依据.