Interpolyelectrolyte complexes of maleic acid copolymers and chitosan for stabilization and functionalization of magnetite nano‐ and microparticles

A facile method of preparation of stabilized and functionalized nano‐ and microparticles of magnetite by successive application of oppositely charged polymers with a regular structure of macromolecular chains (chitosan and maleic acid copolymers) onto Fe₃O₄ core are developed. This approach makes it possible to create two types of magnetite interpolyelectrolyte shells, containing carboxylic or amino groups in outer layer of shell. Composition and magnetic properties of composite particles depend on nature of the copolymer of maleic acid, reaction conditions and size of obtained particles. The carboxylic groups of copolymer in outer layer of interpolyelectrolyte shell were converted into reactive anhydride groups by heating. Thermal treatment also leads to covalent crosslinking of shell and improves stability of composites both in acidic and alkaline media. Horseradish peroxidase was successfully immobilized onto covalently crosslinked and activated microparticles of Fe₃O₄ in aqueous medium without of condensing agents. The proposed reproducible and low‐cost technique does not use toxic reagents or solvents at all stages, including preparation of Fe₃O₄, formation, activation and crosslinking, of magnetite shell, modification of activated surface of composite particles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39663.     

Thermotropic systems with fixed domains exhibiting enhanced overheating protection performance

Within this study, a time saving photo‐initiated miniemulsion polymerization process (duration of polymerization was 15 min) was established in order to encapsulate a paraffin wax with an acrylate polymer shell. The obtained freeze‐dried latex was an off‐white powder exhibiting spherical particles with mean diameters around 400 nm and a concentration of paraffin wax around 56%. Mixing the reaction product with a UV‐curable resin matrix resulted in thermotropic overheating protection glazings with high light‐shielding efficiency. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40417.     

Strength improvements in toughened epoxy composites using surface treated GnPs

Nanographitic materials are gaining enormous interest as a new class of reinforcement for nanocomposites, promising revolutionary electrical, thermal, and mechanical properties. However, the progress has been quite limited especially in terms of mechanical properties. Here we report a significant leap, >2× increases in tensile strength and modulus of an epoxy composite using surface treated graphite nanoplatelets (GnPs). This corroborated by increases in Tgs as well as the presence of oxygen‐functionalized groups verified by XPS, suggest improved distribution and chemical interaction at the filler‐to‐matrix interface. Toughness values also showed increases with concentration, without compromising the strength or failure strain. However, if solvent levels during degassing were not reduced sufficiently, negligible contributions to strength and stiffness were observed with GnP loading. Subsequent elevated temperature treatments increased the strength of the composite due to cure enhancement of the matrix material, yet did not provide mechanical enhancements due to the incorporation of the filler. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40802.     

Antibacterial activity against Escherichia coli of Cu‐BTC (MOF‐199) metal‐organic framework immobilized onto cellulosic fibers

A strong antimicrobial activity against Escherichia coli of Cu‐BTC metal‐organic frameworks immobilized over cellulosic fibers is hereby reported. The in situ synthesis of Cu‐BTC metal‐organic frameworks, aka MOF‐199 or HKUST‐1, onto cellulosic substrates was carried out by exposing carboxymethylated cellulosic substrates to Cu(OAC)₂, 1,3,5‐benzenetricarboxylic acid and triethylamine solutions following a very specific order. Using an in vitro model, in accordance to ASTM E2149‐13a, we observed that the cellulose‐MOF system was able to completely eliminate the growth of E. coli on agar plates and liquid cultures. The antibacterial activity of the comprising components of MOF‐199 and the cellulosic substrate was also evaluated and determined to be negligible. Since the method used to synthesize MOF‐199 crystals provides a strong bond between the crystals and the cellulosic substrates, the crystals not detach from the anionic cellulosic fibers allowing the modified textile to be washed and reused hence opening a new avenue to fabricate antibacterial clinical fabrics. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40815.     

Protective properties of PPy‐Au nanocomposite coatings prepared by sonoelectrochemisty and optimized by the Taguchi method

The polypyrrole (PPy) and polypyrrole‐Au (PPy‐Au) nanocomposite films have been sonoelectrochemically synthesized on St‐12 steel electrodes using the galvanostatic technique. Experimental design according to the Taguchi method has been applied to optimize the factors on the synthesis of PPy‐Au nanocomposite coating. Three factors were used to design an orthogonal array L9: Synthesis time (t), Current density (I), and Concentration of HAuCl₄ (C). The synthesized Au nanoparticles during polymerization were characterized by Ultraviolet–visible (UV‐visible) spectroscopy. Characterization of the surfaces was done by scanning electron microscope (SEM), energy dispersive X‐ray spectrum (EDX), and atomic force microscope (AFM). The scanning electron microscopy (SEM) image of PPy shows a smooth surface while PPy‐Au nanocomposite film has a compact morphology. Moreover, energy dispersive X‐ray spectrum (EDX) is evidence for the incorporation of Au nanoparticles. The corrosion protection of coatings was investigated by open circuit potential (OCP) time trends, potentiodynamic polarization technique, and electrochemical impedance spectroscopy (EIS) in a NaCl 3.5% solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41087.     

Development of a disposable electrode modified with carbonized,graphene‐loaded nanofiber for the detection of dopamine in human serum

A one‐step electrode surface modification is proposed in which a disposable, screen‐printed carbon electrode is functionalized with carbonized, electrospun polyacrylonitrile (PAN)‐loaded graphene (G) nanoparticles to form a composite, CPAN5G‐4x. The electrochemical behavior of the CPAN5G‐4x electrode was examined by cyclic voltammetry and electrochemical impedance spectroscopy. Scanning electron microscopy and X‐ray diffraction were used to characterize the surface morphology and physical properties of the carbonized composite nanofibers before and after modification. The modified electrode was found to be effective for the detection of dopamine (DA) using square‐wave voltammetry (SWV) in the presence of interfering substances such as ascorbic acid and uric acid. With the addition of sodium dodecyl sulfate (SDS) to an optimized solution of phosphate‐buffered saline (PBS) at a pH of 2, the fabricated electrode exhibited enhanced electrocatalytic activity toward the oxidation of DA relative to PBS without SDS at a pH of 7.4. The SWV current displayed a linear response to DA concentrations ranging from 0.5 to 100 μM, with a limit of detection of 70 nM (S/N = 3) and a sensitivity of 1.4258 μA μM^?1 cm^?2. Finally, the CPAN5G‐4x electrode was used to determine DA levels in human serum. The modified electrode can potentially be harnessed for further electrochemical biosensor applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40858.     

Poly(p‐phenylene sulfide) nanofibers prepared by CO2 laser supersonic drawing

Poly(p‐phenylene sulfide) (PPS) nanofibers are prepared by irradiating a PPS fiber with a carbon dioxide (CO₂) laser while drawing it at supersonic speeds. A supersonic jet is generated by blowing air into a vacuum chamber through the fiber injection orifice. Nanofibers obtained at a laser power of 30 W and chamber pressure of 10 kPa exhibit an average diameter of 600 nm and a draw ratio of 110,000. Scanning electron microscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction analyses are employed to investigate the relationships among the chamber pressure, fiber morphology, and crystallization behavior. The nanofibers exhibit two melting temperatures (T_m): approximately 280°C and 320°C. The endothermic peak at T_m = 280°C is ascribable to lamellar crystals and that at T_m = 320°C to the highly complete crystals, since the polymer molecular chain is highly oriented. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40922.     

Cationic microgel emulsion with a high solid content by a multistep addition method in inverse microemulsion polymerization

The multistep addition of a monomer and initiator was developed to successfully synthesize cationic polyacrylamide microgels with solid contents (SCs) greater than 35% and cationic monomer concentrations of 0–40 mol % by inverse microemulsion polymerization. Two feed methods, three‐step nonuniform addition and five‐step uniform addition, were implemented to obtain microgel emulsions with 37% SC. The former addition method was designed according to the solubilization limit of the microemulsion before step polymerization, and that of the latter was a constant based on the remaining surfactant weight in the reactor. The product properties in the intermediate processes of these two methods were compared by dynamic light scattering and viscosity measurement. The results show that the products here were translucent microemulsions instead of milky ones when they were synthesized by a semicontinuous polymerization. Also, the particle sizes of these two methods were almost the same; this indicated that the oscillation phenomenon in continuous polymerization at a high SC was avoided. With the former feed method, the risk and operation cost in the synthesis process could be cut down greatly. Moreover, the viscosity of the cationic microgel emulsion conformed to the Krieger–Dougherty equation with a greater value of intrinsic viscosity than that of a hard‐sphere system because of an electroviscous effect. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40585.     

Chemical vapor deposition of poly(3‐alkylthiophene) nanoparticles on fabric: Chemical and electrochemical characterization

Chemical vapor deposition of poly(3‐methylthiophene) and poly (3‐hexylthiophene) as conductive polymers on the surface of polyester fabrics was successfully obtained. Fourier transform infrared spectroscopy confirmed the formation of polymers on surface of fabrics (the fingerprint of polythiophenes, υ 600–1500 cm^?1). The uniformity of deposition and nanoparticles (average size of 60 nm) were proved with scanning electron microscopy. Electrochemical impedance spectroscopy showed that P3HT‐coated samples offer higher conductivity in compared to P3MT‐coated samples. The impedance modulus of P3HT‐coated samples was lowered nine times to that of row materials and reached to c8000 Ω. The samples have also shown electrochromic properties under electrical current, changing its color from yellowish green at 0 V to dark green at +12 V for poly (3‐hexylthiophene) samples and from brown at 0 V to red at +12 V for poly(3‐methylthiophene)‐coated fabrics (V = 0 V, λ = 450 nm; V = 12 V, λ = 650 nm). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40673.     

Enhancing the air impermeability of a biobased poly(di‐isoamyl itaconate‐co‐isoprene) elastomer via the cocoagulation of latex and natural layered silicates

The gas‐barrier properties of elastomer are of particular importance, especially for airtight applications. Poly(di‐isoamyl itaconate‐co‐isoprene) (PDII) is a newly invented and respectable biobased elastomer, but the barrier properties of PDII and its composites with carbon black and silica are not satisfying at all. Because there are abundant ester groups in PDII macromolecules and these groups can contribute to the homogeneous dispersion of layer silicates, we applied layered silicates, including montmorillonite (MMT) and rectorite (REC), into the PDII matrix to improve the air impermeability. MMT/PDII and REC/PDII composites were prepared by a cocoagulation method, and the air impermeability of the PDII elastomer was highly improved. The smallest gas permeability index reached 1.7 × 10^?17 m² Pa^?1 s^?1 at an REC content of 80 phr; this implied a reduction of 85.5%. A comparison of the two types of silicate/PDII composites showed that the MMT/PDII composites had better properties at low filler contents, whereas the REC/PDII composites had better mechanical and gas‐barrier properties at high filler contents. Other structures and properties of the composites were investigated by X‐ray diffraction, transmission electron microscopy, and dynamic mechanical rheology. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40682.