有机硅氧烷对硅橡胶网络的补强作用

本文通过硅氧烷水解的途径对乙烯基封端的聚二甲基硅氧烷(PDMS)在交联前后导入不变形或可变形的补强填充剂的新方法进行了研究,并此较了它们的补强性能。实验结果表明:交联后的 PDMS 网络,用四乙氧基硅烷(TEOS)水解得到的二氧化硅粒子具有最佳的补强性能,这种方法要比其他硅氧烷水解获得的补强效应大得多。实验也指出:液体硅橡胶在交联前引入的二氧化硅补强剂是完全可能的。它能形成一种稳定的橡胶一填料分散体系,并有相当的补强作用。但它的补强效应不如交联后引入补强剂的方法好。     

Si基Cu/NiFe薄膜的生长及其粘附特性研究

微机械(MEMS)工艺和集成电路(IC)工艺中,在硅(Si)片上电铸高深宽比坡莫(NiFe)合金材料常出现脱落现象.提出了一种电铸NiFe合金材料的新方法,这种方法制作的合金薄膜厚度达200 μm时不脱落.此方法即对等离子刻蚀后的硅片溅射种子层铜(Cu),然后对种子层进行电镀,当其厚度达到约15 μm时,再进行NiFe合金的电铸.本文用扫描电镜、x射线衍射仪和剥离实验研究了薄膜粘附特性.研究结果表明当对种子层电镀后,随着Cu种子层厚度的增加,Cu/NiFe薄膜与基体的粘附强度增加,而薄膜的残余应力降低;同时Cu膜表面粗糙度增加,也增加了NiFe膜与Cu膜的粘附强度.     

Hydrogen plasma treatment of very thin p-type nanocrystalline Si films grown by RF-PECVD in the presence of B(CH3)3

Abstract

We have characterized the structure and electrical properties of p-type nanocrystalline silicon films prepared by radio-frequency plasma-enhanced chemical vapor deposition and explored optimization methods of such layers for potential applications in thin-film solar cells. Particular attention was paid to the characterization of very thin (～20 nm) films. The cross-sectional morphology of the layers was studied by fitting the ellipsometry spectra using a multilayer model. The results suggest that the crystallization process in a high-pressure growth regime is mostly realized through a subsurface mechanism in the absence of the incubation layer at the substrate-film interface. Hydrogen plasma treatment of a 22-nm-thick film improved its electrical properties (conductivity increased more than ten times) owing to hydrogen insertion and Si structure rearrangements throughout the entire thickness of the film.     

T型发射区单晶硅太阳电池的输出特性研究

利用TCAD半导体器件仿真软件对具有T型发射区结构的单晶硅太阳电池进行了仿真研究。全面系统地分析了在不同衬底少子寿命情况下,不同T型发射区深度对太阳电池外量子效率、短路电流密度、开路电压、填充因子及转换效率的影响。仿真结果表明:采用T型发射区结构可在一定程度上提高常规均匀发射区太阳电池的电学性能;T型发射区结构对700~1200nm长波段入射光的外量子效率具有明显的改善作用;当衬底少子寿命一定时,太阳电池短路电流密度、填充因子均随T型发射区深度的增大而增大,而开路电压随T型发射区深度的增大而减小;当T型发射区深度大于80μm时,对于低衬底少子寿命的单晶硅太阳电池,T型发射区结构对其转换效率的改善效果最为显著。     

Synthesis of TiO2 nanopellet by TiCl4 as a precursor for degradation of RhodamineB

In the present investigation in order to promote TiO₂ pellet structure and its photocatalytic activity, two new precursors were synthesized in the powder and sol forms, using sol–gel method with precipitation of TiCl₄. Since TiO₂ pellets are normally synthesized by the commercial TiO₂ powder (DegussaP25), in this investigation and in the first step a new synthesized TiO₂ powder was produced and compared with DegussaP25. Subsequently, two types of pellet were made by the new synthesized powder and titania sol. The characterization of the synthesized TiO₂ powder and pellet were performed by XRD, FT-IR, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The result showed that by the new procedure utilized here, without using any additive not only the surface area of the produced TiO₂ powder has been increased, but also the crystalline phase is completely in the anatase form. It was also found that the synthesized pellets by the sol precursor had better morphological structure than the synthesized pellets by theTiO₂ powder (either DegussaP25 or new synthesized powder). Ultimately, in order to evaluate photocatalytic activity of TiO₂ powders and pellet, degradation of RhodamineB was tested.     

焦化汽柴油加氢捕硅剂的制备及性能评价

目的 脱除焦化汽柴油馏分中的有机硅化合物,避免催化剂硅中毒。方法 以拟薄水铝石粉为载体制备原料,镍钼为活性金属组分,采用等体积浸渍法制备了加氢捕硅剂,利用N₂吸附脱附、X射线衍射、吡啶红外光谱、扫描电镜等方法对其进行分析表征,并在200 mL加氢中试装置上考查了捕硅剂的脱硅活性和2 000 h活性稳定性。结果 自主开发的捕硅剂比表面积和孔容较高,酸性适宜,活性金属分布均匀,强度满足工业装置装填要求。捕硅剂的脱硅活性较高,在典型的工业条件下,脱硅率>90%,在2 000 h活性稳定性试验过程中,脱硅率稳定>90%,活性稳定性良好,且具有较高的容硅能力。结论 自主开发的捕硅剂具有广阔的工业应用前景,对清洁燃料的生产及保护装置的长周期稳定运行具有十分重要的意义。     

Editable Supercapacitors with Customizable Stretchability Based on Mechanically Strengthened Ultralong MnO2 Nanowire Composite

Although some progress has been made on stretchable supercapacitors, traditional stretchable supercapacitors fabricated by predesigning structured electrodes for device assembling still lack the device‐level editability and programmability. To adapt to wearable electronics with arbitrary configurations, it is highly desirable to develop editable supercapacitors that can be directly transferred into desirable shapes and stretchability. In this work, editable supercapacitors for customizable shapes and stretchability using electrodes based on mechanically strengthened ultralong MnO₂ nanowire composites are developed. A supercapacitor edited with honeycomb‐like structure shows a specific capacitance of 227.2 mF cm^?2 and can be stretched up to 500% without degradation of electrochemical performance, which is superior to most of the state‐of‐the‐art stretchable supercapacitors. In addition, it maintains nearly 98% of the initial capacitance after 10 000 stretch‐and‐release cycles under 400% tensile strain. As a representative of concept for system integration, the editable supercapacitors are integrated with a strain sensor, and the system exhibits a stable sensing performance even under arm swing. Being highly stretchable, easily programmable, as well as connectable in series and parallel, an editable supercapacitor with customizable stretchability is promising to produce stylish energy storage devices to power various portable, stretchable, and wearable devices.     

基于FPGA的硅微陀螺仪零偏温度补偿系统的研究

介绍了温度对硅微陀螺仪的零偏的影响机理,通过温度实验得知零偏随温度变化成复杂的非线性关系,并用最小二乘法拟合出了零偏在～40℃～80℃随温度变化的数学表达式;以FPGA芯片为主要器件设计了零偏温度补偿系统,并进行了温度实验测试,测试结果表明补偿效果明显。     

纳米CeO2的紫外吸收和表面改性研究

紫外吸收光谱分析氨水沉淀法制备的粒度在10nm的纳米二氧化铈表明在200～480nm的范围具有较好的紫外吸收能力。用无水乙醇为溶剂,硬脂酸为改性剂,初步探讨了纳米CeO2进行表面改性机理。活化度和吸油值分析表明,当硬脂酸用量在2．5％时,已经有较好改性效果,为纳米CeO2在聚合物中的应用提供一定的参考价值。