Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.     

高压锅炉补给水系统管道的腐蚀

讨论了锅炉补给水管道的腐蚀情况 ,指出溶解氧和二氧化碳是产生腐蚀的主要原因 ,其腐蚀速率为0 .4 2mm/a。确保真空除气系统正常运行和二级除盐水箱的密封效果是控制腐蚀的主要手段。在此情况下 ,该管线尚可运行 7年     

应用底饲回燃循环流化床技术改造东锅DG35/3.82-7型流化床锅炉

采用飞灰循环底饲回燃技术改造西南合成制药总厂热电分厂、天府矿务局磨心坡发电厂2台东方DG35/3.82-7型低倍率循环流化床锅炉。改造后运行结果表明,锅炉可长期、稳定运行,尾部飞灰可燃物含量大幅度降低,锅炉蒸发量提高20％左右,节煤效果明显。为燃用贫煤、无烟煤和煤矸石等劣质燃料且锅炉炉膛高度较低的电站技改,提供了一种切实可行的方法。     

环冷机卸矿槽料位自动控制技术的改进

针对烧结过程中环冷卸矿槽料位存在周期性变化的特点。提出了一种改进的控制思路和解决方案。该方案在太钢三烧450m^2烧结机上采用后，取得了较好的效果。     

栅板注射模设计

分析了栅板零件的工艺性 ,介绍了栅板注射模的设计方案及设计要点 ,并对浇注系统的设计计算作了较详细的阐述。该模具经生产验证 ,各部件动作灵活、可靠 ,生产的塑件质量符合要求。     

HRP-12型负载杂多酸催化剂的失活原因及预防措施

采用XRD、NMR、IR、MS等手段对长链烷基苯合成中失活负载型杂多酸催化剂进行了表征,结果表明,催化剂的失活主要是由于表面结焦引起的,原料中的双烯、烷基芳烃杂质以及反应生成的副产物重烷基苯是引起催化剂结焦的主要原因,对原料进行脱双烯和脱芳烃精制、提高苯烯比以及用苯洗涤催化剂等措施能够有效抑制催化剂的失活。     

Targets and methods for the detection of processed animal proteins in animal feedstuffs

Bovine spongiform encephalopathy (BSE), or ‘mad cow disease’, is one of several transmissable spongiform encephalopathies (TSEs) known to affect certain mammals and is spread through the ingestion of infected animal tissue. It is believed that the inadvertent contamination of meat and bone meal (MBM) with infected animal tissue and the subsequent use of this material as a feed supplement contributed to the spread of the disease in cattle. As a result, the use of processed animal proteins (PAPs) in animal feeds is regulated in many parts of the world. Although feed testing is the only definitive means to certify compliance, regulatory compliance often relies solely on paper certification. Recently, rapid methods have become available that can be used by regulators to determine compliance during routine inspections. We describe a rapid, immunochromatographic strip test that can detect 0.1% MBM in animal feed. The test takes 15 min to perform and large numbers of samples can be screened for PAPs simultaneously.     

整流逆变器在港口起重机械中的应用

根据起重机械特点,在港口机械中的交流变频控制系统中,整流逆变器(也称可逆PWM整流器,简称变流器)组合应用,提高作业效率,降低电能损耗,节省成本.     

中小型液压缸防漏结构工艺

气弹簧后端省去封头，而用缸体直接封口，杜绝了漏气，强化了结构。文章着重介绍了实现这一结构的径向进给封口工具及工艺。     

CH_4、CO_2与O_2制合成气的研究 Ⅱ工艺条件的影响

在固定床反应器中考察了１２％Ｎｉ－５％ＲＥ－２％Ｃｕ－２％Ｌｉ／Ａｌ２Ｏ３（ｍａｓｓ）催化剂在ＣＨ４、ＣＯ２与Ｏ２催化氧化重整制合成气反应中催化剂粒径、工艺操作条件（空速与温度）及原料气配比对反应的影响，确定了较佳的操作条件：催化剂粒径２０～４０目，反应最佳温度为８００℃，ＳＶ＝４×１０４ｍｌ／（ｇ·ｈ）。同时看到在不同的原料气配比的条件下该催化剂的活性亦很稳定，不仅达到了反应平衡，且产物Ｖ（ＣＯ）／Ｖ（Ｈ２）比有很强的调变性。