露天矿山深-浅耦合台阶爆破方法研究及应用

爆破大块率高一直是困扰国内外众多露天矿山的技术难题,银山矿露天采矿场由于采区地质条件复杂,爆破大块率高的现象尤为明显。为此,针对露天采矿场岩性复杂易产生大块的区域,基于岩石的物理力学性质,计算出千枚岩和斑岩爆破区域需增设的短孔孔位。为减少爆破大块的产生率,提出了中深孔爆破方法—深-浅耦合台阶爆破方法。在银山矿露天采矿场实施深-浅耦合台阶爆破方法后,爆破大块率得到有效控制并取得了显著的社会及经济效益。     

等误差直线逼近非圆曲线节点计算新方法

传统的等误差直线逼近法从被逼曲线的端点开始计算节点.文章在此基础上提出一种非圆曲线节点计算新方法,以被逼曲线曲率半径最小点开始,按等误差法求取节点,再根据曲线规律对节点重新进行排序,输出节点坐标值.用该种方法逼近曲线,在逼近误差等于等误差法逼近误差的条件下,节点数少于等误差法求得的节点数,文中用C语言编写新方法求取节点程序,并与传统方法进行比较,最后用曲线方程进行验证,结论正确,具有实际意义.     

数据融合在电梯群控系统中的应用

将数据融合技术引入电梯群控系统中,建立了基于数据融合技术的模糊联结聚合神经网络模型,对影响电梯调度的各因素进行充分有效的数据处理后,得到的电梯控制参数作为电梯调度单元的输入.应用实例表明了该方法是方便且有效的.     

磁性纤维随机混合媒质等效电磁参数的计算

为计及强散射偶极子间的相互作用,引入参量εh和μh,利用广义多重散射理论及MATLAB计算机软件对在2 GHz～18 GHz频率下的体积占空比为8%的铁纤维随机混合媒质等效磁导率的实验值进行曲线的拟合,导出了耦合系数εh和μh,并在此基础上,对体积占空比分别为30%和20%的铁纤维随机混合媒质等效磁导率进行了计算,计算结果与实验吻合良好.     

Accu—Roll轧管机组主减速机输出轴联轴器大过盈量装配

介绍了采用油温加热装配工艺,实现Accu-Roll轧管机组主减速机输出轴联轴器大过盈量装配。     

Catalytic dehydrogenative coupling of methane on active carbon. Effect of metal supported on active carbon

Ethane, ethene, ethyne and hydrogen are obtained in good yields via dehydrogenative coupling of methane in the presence of active carbon as a catalyst. The product yield is increased by supporting metal on active carbon.     

粉煤灰填充尼龙6浇铸制品的研究

将粉煤灰用硅烷偶联剂处理后填充到尼龙6浇铸制品(MC尼龙)中,可以改善制品的吸水性、收缩率及热稳定性等,还可以降低成本。该项研究结果有很大的实用价值。     

氧泵型催化膜反应器中甲烷氧化偶联反应(Ⅰ)——氧泵型催化膜的制备及其反应性能

本文采用1％Sr/La_2O_3-Ag-YSZ氧泵型催化膜反应器进行了甲烷氧化偶联反应研究。比较了不同制备方法的催化膜的反应性能,结果发现浸涂法(Ag-YSZ管随旋转轴转动涂制)制备的膜性能最佳。研究了操作条件对甲烷氧化偶联反应的影响。研究证明,传递氧与气相氧同时进料是一种较好的反应方式。结果表明,利用该反应器不仅可以简化分离过程,而且还可得到更高的C_2烃选择性。     

Non-isothermal reaction-diffusion systems with thermodynamically coupled heat and mass transfer

Non-isothermal reaction-diffusion (RD) systems control the behavior of many transport and rate processes in physical, chemical, and biological systems. A considerable work has been published on mathematically coupled nonlinear differential equations of RD systems by neglecting the possible thermodynamic couplings among heat and mass fluxes, and reaction velocities. Here, the thermodynamic coupling refers that a flux occurs without its primary thermodynamic driving force, which may be gradient of temperature, or chemical potential, or reaction affinity. This study presents the modeling equations of non-isothermal RD systems with coupled heat and mass fluxes excluding the coupling of chemical reactions using the linear non-equilibrium thermodynamic approach. For a slab catalyst pellet, it shows the dynamic behavior of composition and temperature profiles obtained from the numerical solutions of non-linear partial differential equations by Mathematica for two industrial reaction systems of synthesis of vinyl chloride and dissociation of N₂O.     

Oxidative coupling of methane over CaO-MgO mixed oxide

Mixed oxide catalyst prepared by co-precipitating magnesium oxide and calcium oxide showed an excellent activity for the oxidative coupling of methane. The high performances were presumed to arise from the high basicity of the mixed oxide.