Nonlinear filtering structure for image smoothing in mixed-noise environments

This paper introduces a new nonlinear filtering structure for filtering image data that have been corrupted by both impulsive and nonimpulsive additive noise. Like other nonlinear filters, the proposed filtering structure uses order-statistic operations to remove the effects of the impulsive noise. Unlike other filters, however, nonimpulsive noise is smoothed by using a maximum a posteriori estimation criterion. The prior model for the image is a novel Markov random-field model that models image edges so that they are accurately estimated while additive Gaussian noise is smoothed. The Markov random-field-based prior is chosen such that the filter has desirable analytical and computational properties. The estimate of the signal value is obtained at the unique minimum of the a posteriori log likelihood function. This function is convex so that the output of the filter can be easily computed by using either digital or analog computational methods. The effects of the various parameters of the model will be discussed, and the choice of the predetection order statistic filter will also be examined. Example outputs under various noise conditions will be given.     

共轭高分子三阶非线性光学材料

概述了ｎ－共轭高分子材料的三阶非线性光学性质，着重讨论了化学结构对其光学非线性的影响，说明了ｎ－共轭聚合物的三阶非线性极化率主要取决于共轭主链的结构，侧链取代基的变化对其非线性影响不大，文中展望了共轭高分子材料在集成光学中的应用前景。     

激光光束质量因子的研究进展

本文详细分析了各种光场下光束质量M2因子。在不同的场中,A.E.Siegman当初所定义的M2因子,已经有了很大的变化,因而M2因子的特性也与当初不同,不仅M2因子可以大于等于1,而且可以小于1,甚至小于0。其反映的物理意义,也从经典场中的衍射极限倍数,变化为非经典场中的准直性量度以及对空间相干性的某些反映。此外还列举并分析了几种特殊的光束质量因子,最后讨论了M2因子应用的问题并指出了其局限性。     

Nonlinear parametric identification based on the criterion of minimum probability of estimation error

The importance of studies of alternative (as compared to traditional) methods of nonlinear stochastic parametric identification is demonstrated. Synthesis of a procedure of identification of the parameter, “discrete observer,” with the use of the criterion, “minimum probability of estimation error,” is proposed for the first time. A model example that demonstrates the efficiency of the proposed approach is considered.     

大型活塞式压缩机弹性隔振基础的设计及安装

大型活塞式压缩机基础转速较低,传统上采用固定大块体结构,不仅基础的体积和重量都很大,而且动力计算模型也比较复杂,设计参数具有不确定性。而弹簧隔振基础结构边界条件简单清晰,解除了设备、基础块与下部结构的刚性动态耦合,受力明确,构造简单,可靠性和准确度高;隔振效率高达80%以上,能大大降低设备本身和对下部结构的动力作用。文章结合胜利油田油气集输总厂一工程实例,从结构型式、隔振原理、物理参数、动力分析几方面介绍了弹性隔振基础的设计,并简要介绍了弹性隔振基础的安装要点。     

小高跨比单层单跨实腹门式刚架平面内弹性整体稳定分析

采用精确的有限元非线性分析方法对小高跨比单层单跨实腹门式刚架的平面内弹性整体稳定性进行了大量的参数分析，指出在梁上均布荷载作用下，当柱梁高跨比小于某一数值时，一般不发生传统理论所认为的反对称失稳模式，而是以对称失稳模式为主。给出了修正的柱计算长度系数，并与规范给出的数值进行了对比，认为这种对称失稳模式更不利于门式刚架的整体稳定，应该引起足够的重视。     

回转窑大齿圈的安装与找正

根据回转窑大齿圈结构特点，阐述了回转窑大修中两个半齿圈组装、校正及与简体的安装、找正方法以及重要工艺过程中的注意事项，在山西铝厂2^#熟料窑大修中取得了良好效果。     

螺旋弹簧的非线性理论及实验研究

本文通过对经典的圆柱螺旋弹簧理论的修正,给出了非线性理论解析公式.还通过对螺旋弹簧的精确测量和处理,验证了本文的非线性理论.     

Applications of Soliton Transmission Control in Optimal Design of Long－Haul Soliton Communication System

ＡｐｐｌｉｃａｔｉｏｎｓｏｆｃｈａｏｓｉｎｓｐｒｅａｄｓｐｅｃｔｒｕｍｃｏｍｍｕｎｉｃａｔｉｏｎｓＡｐｐｌｉｃａｔｉｏｎｓｏｆＳｏｌｉｔｏｎＴｒａｎｓｍｉｓｓｉｏｎＣｏｎｔｒｏｌｉｎＯｐｔｉｍａｌＤｅｓｉｇｎｏｆＬｏｎｇ－ＨａｕｌＳｏｌｉｔｏｎＣｏｍ...     

圆柱形螺旋弹簧的简捷计算

将圆柱形螺旋弹簧设计中的部分常用公式组合成一组仅与弹簧指数Ｃ有关的公式，并将Ｃ＝４～１４代入计算而获得一套参数表，由此，可提高圆柱形螺旋弹簧的设计效率。