MICROSTRUCTURE AND FATIGUE PROPERTIES OF A WELDED DUPLEX STAINLESS STEEL

Abstract— In response to the increasing structural applications in duplex steels for welded structures, fatigue behaviour of a SAF 2304 grade duplex stainless steel was investigated, considering both the base metal and GTAW welded joints. Fatigue curves and fatigue limits under rotary bending fatigue were obtained. The study focused attention on the microstructural features of fatigue crack propagation of the two series of experiments, thereby permitting an evaluation of the tortuous crack path of welded joints and the mechanisms related to threshold microstructural barriers.     

关于深冲薄钢板中的夹杂和成形性的商榷

对深冲薄钢板大生产的全工艺过程进行了跟踪，研究了ＷＹ０８ＡｌＡ薄钢板中Ａｌ＿２Ｏ＿３的形成，形态以及它们对冷轧成品的深冲性能和冲压小件的冲压成形废品率的影响。     

析出物对IF钢性能的影响

一种阻性的晶闸管控制制动器被用于阻尼向串联补偿传输供电的热电发电机中的瞬态扭。重点放在开发适用的控制算，并通过多种不同的运行方式验证算法。作为一种制动器最优控制的可能方法，本文研究了离散等级一般化预先控制（ＧＰＣ），讨论了系统上ＧＰＣ执行过程中存在一些问题。用Ｐｒｏｎｇ分析来辩识系统传递函数，此传递函数与控制方案的考虑及强度特性有关。     

复合脱氧剂对纯净钢生产的影响

论述复合脱氧剂的一般化学特性，并以碳化硅和硅铝铁两种复合脱氧剂为例，讨论其对改善钢的质量，进行纯净钢生产的影响。     

LP-401磷化液在冷拔钢管生产中的应用

简单介绍了磷化液成膜原理。通过对比试用，得出了较为合理的工艺参数。实践证明，LP-401磷化液能够满足冷拔无缝钢管生产要求。     

Yttrium sol–gel coating effects on the cyclic oxidation behaviour of 304 stainless steel

The present results reveal the interest of sol–gel coating technique to improve 304 steel high temperature oxidation resistance. An yttrium sol–gel coating appears to enhance the oxidation resistance during isothermal oxidation test, to decrease widely the oxide weight gain and to reduce the initial transient oxidation stage generally observed in the case of blank steels. Moreover, the experimental results confirm that yttrium sol–gel coating also plays a significant role on the cyclic oxidation behaviour of the 304 steel. In fact, the yttrium addition promotes remarkably the prolongation of the period during which the oxide scale still remains adherent to the substrate.     

不锈钢绕带容器环板与绕带端头的焊接

本文通过焊接试验对奥氏体不锈钢绕带容器环板与绕带焊接工艺进行了研究分析,并得出了合理的焊接方法和工艺参数。     

轻钢结构浅析

轻钢结构作为一种新型结构在近几年发展很快，应用范围也日趋广泛。主要针对轻钢结构的特点，结合实际工程设计，对轻钢结构现状、发展进行了阐述和分析。     

高合金铁基烧结材料在轧钢导位中的应用研究

本文研究了高合金铁基烧结材料在轧钢导位中的应用。实验表明,通过粉末冶金液相烧结技术,可以获得具有优良综合性能的制品,材料密度ρ≥7.5 g/cm3,硬度≥55 HRC,抗弯强度≥1 000 MPa,冲击韧度αk≥3.9 J/cm2,满足了轧钢导位辊的工作要求。材料利用率可达95%以上、降低了制备成本。使用寿命是普通轧辊寿命的3~6倍,适用于线材和小型型材的轧钢生产。     

10000m^3天然气球罐用WEL—TEN610CF钢焊接冷裂纹敏感性

WEL-TEN610CF钢是日本新日铁公司生产的低裂纹敏感性高强钢,结合我国首台国产化10 000 m3天然气球罐用37 mm厚WEL-TEN610CF钢焊接性试验研究,对该钢焊接冷裂纹敏感性进行了综合评定,为其焊接工艺的制订提供了可靠的依据。