Important issues in a molecular dynamics simulation for characterising the mechanical properties of carbon nanotubes

This paper discusses several important issues in a molecular dynamics simulation for analysing carbon nanotubes and their mechanical properties. In particular, the paper addresses the problems in selecting appropriate inter-atomic potentials, number of thermostat atoms, thermostat techniques, time and displacement steps and number of relaxation steps to reach the dynamic equilibrium. Based on these, the structural changes of armchair and zigzag nanotubes and their mechanical properties are investigated. The Young's modulus and Poisson's ratio of the armchair tube are 3.96 and 0.15 TPa, respectively, and those of the zigzag tube are 4.88 and 0.19 TPa, respectively. The best simulation technique identified in this study predicts that the ultimate tensile strain of a carbon nanotube is around 40% before atomic bond breakage.     

Interbay物料自动搬运系统性能分析

Interbay物料自动搬运系统的运行效率对于晶圆制造系统影响较大,研究Interbay物料自动搬运系统的绩效具有较大的意义[1]。该文以带有捷径的单闭环背脊式布局的物料自动搬运系统为研究对象,通过问题描述,简化、假设将实际问题抽象为导引运输模型。然后,建立数学模型,采用Dijkstra算法确定工件搬运的最短路径。最后,利用Arena仿真软件建立含有导引运输设备的模型,采用控制变量法探究小车数量小车占用轨道的方式、调度规则等因素对于产出的影响,发现对于本文中的模型,其它条件相同时,搬运系统采用Release-at-end的控制方式,系统最大搬运量越大。     

跳频通信系统的建模与仿真

在Matlab/Simulink仿真的平台上,利用跳频通信基本原理,在给定仿真条件下,建立了跳频通信系统模型,对系统进行了仿真,得到了宽带噪声干扰下的误码率信噪比曲线。通过跳频仿真图形前后对比,得出跳频通信系统的抗干扰能力优于传统的定频通信,在现代通信中有更高可靠性的结论。     

孵化机温度模糊控制器设计与仿真

温度控制的精度和稳定性是孵化机系统急需解决的关键技术,系统中的被控对象不能建立精确的数学模型。为了提高温度控制精度和稳定性,采用模糊控制方法设计模糊控制器并通过Matlab进行仿真。对模糊规则的仿真说明规则较合理,对系统的仿真表明模糊控制器超调量较小,调节时间大约为20秒,系统稳定。     

如何提升企业网站在搜索引擎上的排名

企业网站若想取得好的营销效果,就要提高自己在搜索引擎上的排名.而排名的好坏需要站长的主动出击,以及营销团队与网站策划开发与维护团队的紧密配合.方法主要有主动登陆搜索引擎、被动等待搜索引擎的收集以及积极的利用搜索引擎的推广功能.多管齐下才能取得更好的效果.     

基于SNMP协议校园网络管理系统设计与实现

结合高校校网络管理需求,通过对简单网络管理协议（SNMP）工作原理分析和研究,提出了基于SNMP协议网络管理系统的设计思路和编程实现方法。     

Numerical simulations of drop impact and spreading on horizontal and inclined surfaces

The phenomenon of drop spreading is important to several process engineering applications. In the present work, numerical simulations of the dynamics of drop impact and spreading on horizontal and inclined surfaces were carried out using the volume of fluid (VOF) method. For the horizontal surfaces, the dynamics of impact and spreading of glycerin drops on wax and glass surfaces was investigated for which the experimental measurements were available [Šikalo, Š., Tropea, C., Ganic, E.N., 2005a. Dynamic wetting angle of a spreading droplet. Experimental Thermal and Fluid Science 29, 795-802; Šikalo, Š., Tropea, C., Ganic, E.N., 2005b. Impact of droplets onto inclined surfaces. Journal of Colloid and Interface Science 286, 661-669]. The influence of surface wetting characteristics was investigated by using static contact angle (SCA) and dynamic contact angle (DCA) models. The dynamics of drop impact and spreading on inclined surfaces and the different regimes of drop impact and spreading process were also investigated. In particular, the effects of surface inclination, surface wetting characteristics, liquid properties and impact velocity on the dynamics of drop impact and spreading were investigated numerically and the results were verified experimentally. It was found that the SCA model can predict the drop impact and spreading behavior in quantitative agreement with the experiments for less wettable surfaces (SCA>90^°). However, for more wettable surfaces (SCA<90^°), the DCA observed at initial contact times were order of magnitude higher than SCA values and therefore the DCA model is needed for the accurate prediction of the spreading behavior.     

超支化含苯基聚硅氧烷亲二氧化碳特性及其分子模拟

通过水解缩聚法制备含有不同苯基含量的超支化聚硅氧烷，探究苯基的引入对超支化聚合物在CO2中溶解性能的影响。浊点压力测试得出苯基的引入在超支化结构中对聚合物在CO2中的溶解度影响不大，超支化聚合物中苯基含量的增加没有导致浊点压力的明显升高，有望实现作为CO2增稠剂兼具较好的溶解度和增稠性能。分子模拟计算分析了超支化聚硅氧烷和直链聚硅氧烷与CO2分子间的相互作用以及超支化聚硅氧烷分子间的相互作用，发现含苯基的超支化聚硅氧烷具有更低的内聚能密度（CED）和溶解度参数（δ），表现出更弱的聚合物分子间相互作用，有利于超支化有机硅氧烷在CO2体系中的溶解。     

Continuous-velocity lattice gas cellular automata for miscible binary fluid and its application to simulation of interface instability

Continuous-velocity lattice gas cellular automata (CVLGA) is extended to miscible binary fluid systems. A new parameter is introduced in order to control the diffusivity of the fluids. The correlation between the diffusivity and the new parameter proves that there exists the maximum value of the diffusivity. Quantitative verifications of the model are carried out with numerical simulations of the diffusion phenomena across a falling fluid film. The model is then applied to the simulations of Rayleigh-Taylor instability during the gravitational mixing phenomena. The qualitative tendency of the growth of the interface instability is the same as that obtained in conventional numerical methods.     

垂直管道中塞状流的模拟

运用简化的硬球模型模拟垂直管道中的塞状流. 固相行为通过跟踪离散颗粒的运动轨迹处理,气相运动由局部平均的Navier–Stokes方程处理,气固两相间的耦合作用服从牛顿第三定律. 每个颗粒的运动过程被分解为颗粒间相互碰撞的过程及流体对其悬浮的过程. 该模型定性地模拟了垂直管道中的塞状流,即在细而长的管道中,颗粒形成沿管道运动的塞状物,且塞状物的运动速度独立于塞状物的长度,但随着气体速度的增加而增加.