EWB应用于模拟电路分析的研究

介绍了将EWB用于“模拟电子技术”的课堂教学时，虚拟实验测量结果与理论计算值不一致时，如何去分析并解决问题。     

横流均匀环境中三维线源型正负浮力射流特性研究

本文利用混合有限分析法及交错网格。对横流均匀环境中三维线源型正负浮力射流及负浮力射流的特性进行研究，分析了不同工况下流速，温度和湍动能在断面上的分布及影响射流轨迹线的因素，讨论了轨迹线上温度的变化及浮力射流的贴壁现象。对三维长线源型负浮力射流，分析了流速比，喷口弗汝德数对负浮力射流的影响。     

再论“用离心机作静力结构模型试验”

 本文通过最近所作的两个离心模型试验,进一步探讨了用离心机作静力结构模型试验的有关问题,试验结果进一步证明用离心机作静力结构模型试验,无论在理论上和试验技术上都是可行的,最后将有关问题作了进一步的讨论。     

Prediction of cracking within early-age concrete due to thermal, drying and creep behavior

To predict potential early-age cracking after concrete placing, a numerical simulation procedure has been completed based on a micromechanical model and empirical formulas on the property development of young concrete. The numerical model could account for the effects of hydration, moisture transport and creep. Environmental influences, such as removal of formworks, curing conditions and variations of surrounding temperature and relative humidity, have been investigated. In calculating stress field with age caused by these synthetic physical-mechanical processes, three-dimensional finite element and finite difference (3D-FE-FD) methods are combined together.     

Bottleneck Analysis of Assembly Lines with Characteristic Curves

Tuning the performance parameters of all stations of interlinked manufacturing and assembly systems to ensure the planned capacity is a major challenge. The application of system simulation for this task is little common, particularly in SMEs. A suitable tool for quickly assessing the specific influence of a standalone station on the entire system performance has been developed on the basis of the characteristic curve theory. The applied methodology and the results obtained are presented in this paper.     

船艇电站仿真与综合管理系统

论文介绍了船艇电站模拟器的组成和实时仿真功能,着重描述了多层次的图形管理系统及其仿真界面。课题将多媒体课件制作与模拟器有机地结合,涵盖了船舶主要电气设备的控制电路,既利于实践训练又便于原理的讲解,并在实践中取得了良好的效果。     

天线方向图的复射线仿真

根据复射线理论，利用复源点高斯波束场来模拟天线的远场方向图。本文提出三种模拟方法，即主瓣匹配法，峰值匹配法和逐点匹配法，给出了多种方向图的仿真结果。数值分析和优化结果表明，复射线峰值匹配法是一种精确实用的天线方向图仿真技术。     

微波BJT超宽带低噪声放大器的设计

本文给出了一种频带覆盖达１０－１６００ＭＨｚ的微波ＢＪＴ超宽带低噪声放大器的设计方法，从微波ＢＪＴ的噪声模型出发，通过拟合５０Ω源阻抗下微波ＢＪＴ的噪声系数ＮＦ５０和Ｓ参数来提取其噪声参数，然后根据增益，噪声及驻波比要求优化设计放大器，使放大器在超宽带范围内获得平坦增益和低噪声，本文所给出的微波ＢＪＴ惨数提取及放大器优化设计方法已由实验结果所验证。     

程潮铁矿大断面采准巷道稳定性数值模拟研究

针对武钢程潮铁矿采准巷道净断面尺寸增大，巷道稳定性下降的状况，采用数值计算方法对程潮铁矿巷道支护方案进行优化计算，并给出合理的支护方案。