Sandwich panels with Kagome lattice cores reinforced by carbon fibers

Stretching dominated Kagome lattices reinforced by carbon fibers were designed and manufactured. The sandwich panels were assembled with bonded laminate skins. The mechanical behaviors of the sandwich panels were tested by out-of-plane compression, in-plane compression and three-point bending. Different failure modes of the sandwich structures were revealed. The experimental results showed that the carbon fiber reinforced lattice grids are much stiffer and stronger than foams and honeycombs. It was found that buckling and debonding dominate the mechanical behavior of the sandwich structures, and that more complaint skin sheets might further improve the overall mechanical performance of the sandwich panels.     

Measurement of the Timoshenko Shear Stiffness. II: Effect of Transverse Compressibility

This is the second of two papers devoted to the issue of measuring the Timoshenko shear stiffness of thin-walled composite beams. In the first paper, the effect of warping on the effective Timoshenko shear stiffness, as measured through bending tests, was studied. The bending test was simulated using finite-element analysis, and the results indicated that the warping effect was minimal. On the other hand, the evidence suggests that transverse flexibility may have a significant influence on the effective Timoshenko shear stiffness, decreasing the effective shear stiffness at shorter test spans. The purpose of the present study is to further investigate this effect and to explore the use of a sandwich theory to predict the measurement error. A higher-order sandwich theory, which captures the transverse strain at concentrated loads and supports, is applied to a commercially available thin-walled composite beam. The results indicate that the sandwich model does capture the decrease in the effective shear stiffness at short spans, and the dependence of the shear stiffness on span-to-depth ratio is similar to that calculated in the first paper, using the finite-element method.     

Tedesko’s Philadelphia Skating Club: Refinement of an Idea

This paper presents new aspects of Anton Tedesko’s design for an important thin shell concrete roof. The study of this roof results from the examination of original engineering drawings and calculations which we present with the goal of promoting a greater understanding of the structural design of a major figure in the tradition of 20th century building.     

实用钢筋混凝土梁板结构优化设计

本文比较全面地考虑了钢筋混凝土梁板结构实际设计时的全部必要约束,给出了一套(单跨矩形和T形梁、单向板、按弹性理论计算的双向板和矩形等截面连续梁)简单实用的近优化设计的解析公式,为编制其优化设计的实用程序和图表提供了根据.     

Modelling and analysis of 3-D arrangements of particles by point processes with examples of application to biological data obtained by confocal scanning light microscopy

Within the concept of point processes, a review is presented of quantities which can be used in studies of three-dimensional (3-D) aggregates of particles. Suitable characteristics and estimators are given for both unmarked and marked point processes. To demonstrate the feasibility of such quantitative approaches, an application in histology, dealing with 3-D arrangements of cell nuclei in rat liver, is described. Using a confocal scanning light microscope, 3-D images are recorded and image analysis used to obtain the coordinates of the centroid, together with the volume and DNA content, of each cell nucleus. Examples of results are given, using both unmarked and marked point processes. In the latter case, cell type, nuclear volume and ploidy group are suitable marks.     

A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

In this study, a damage identification approach was developed for carbon fibre/epoxy composite laminates with localized internal delamination. Propagation of the Lamb wave in laminates and its interaction with the delamination were examined. The fundamental symmetric Lamb wave mode, S₀, and the lowest order shear wave mode, S₀^′, were chosen to predict damage location. A real-time active diagnosis system was therefore established. This technique uses distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. The two-way switches were employed to minimize the number of transducers. A signal-processing scheme based on the time–frequency spectrographic analysis was utilised to extract useful diagnostic information. Also, an optimal identification method was applied on damage searching procedure to reduce errors and obtain the diagnostic results promptly. Experiments were conducted on [0/−45/45/90]_s CF/EP laminates to verify this diagnosis system. The results obtained show that satisfactory detection accuracy could be achieved.     

Mesh data structure selection for mesh generation and FEA applications

The data structure representing a mesh and the operators to create and query such a database play a crucial role in the performance of mesh generation and FE analysis applications. The design of such a database must balance the conflicting requirements of compactness and computational efficiency. In this article, 10 different mesh representations are reviewed for linear tetrahedral and hexahedral meshes. A methodology for calculating the storage and computational costs of mesh representations is presented and the 10 data structures are analysed. Also, a system for ranking different data structures based on their computational and storage costs is devised and the various mesh representations are ranked according to this measure. Copyright © 2002 John Wiley & Sons, Ltd.