InP基应变补偿结构偏振不灵敏半导体光放大器制作的研究

为了制备偏振不灵敏的半导体光放大器(SOA)，将有源区设计为由4个压应变、3个张应变阱层及晶格匹配的垒层InGaAsP交替组合而成的应变补偿结构。器件做成带有倾角的扇形脊形波导结构，避免了常规制作SOA的复杂工艺。对样品3在80～125mA电流范围内，获得了偏振灵敏度≤0．6dB．最小可达0．1dB；较大的电流范围内FWHM值为40nm。     

Full Complex Amplitude Digital Holograms： Design, Fabrication and Optical Characterization

Diffractive optical elements have a large number of industrial applications, such as beam shaping and optical filtering. Traditionally, these elements modulate the phase of the incoming light or its amplitude, but not both. To overcome this limitation, full complex-amplitude modulation diffractive optical elements were developed. Well-established integrated circuit fabrication steps were employed to fabricate the devices with high precision. Using this approach, the new element‘s optical performances are improved also for near field operations. With this device it is possible to obtain 100% efficient spatial filtering and low noise reconstructed images.     

Electrical characterization of homoepitaxial diamond p–n junction

Electrical properties of homoepitaxial diamond p–n⁺ junction of boron (B)-doped p-type layer and phosphorus-doped n-type layer on Ib (111) diamond single crystal have been characterized. Current–voltage characteristics show a clear rectifying property with rectification ratio of over 10⁵ at ± 10 V. From capacitance–voltage characteristics, it is found that a spatial distribution of space-charge density N_i of the p–n⁺ junction is not uniform and N_i at a middle region of the space-charge layer formed at zero bias voltage is higher than that of other region of the space-charge layer. This peculiar characteristic can be explained by superposition of two effects; one is the deep dopant effect due to B atoms in the p-type layer, which makes to reduce N_i at around the edge of the space-charge layer formed at zero bias voltage. The other is the compensation of B acceptors by impurity atoms diffusing during the p–n⁺ interface and incorporating during the growth of p-type layer, which makes to reduce N_i at the vicinity of the p–n⁺ interface.     

BPxN1-x薄膜的制备及磷元素对其光学能隙的影响

本文从应用出发，选择光学石英为衬底，采用热丝辅助射频化学气相沉积的方法沉积BPxN1—x薄膜，对样品进行了X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外—可见等测试。XRD、SEM结果显示薄膜多晶态，表面形貌随时间变化，最终为胞状；紫外—可见光光谱结果显示BPxN1—x薄膜的紫外吸收边随沉积时间的加长、PH3流量的增加而向长波长方向移动。因此，该材料的光学能隙可以通过生长工艺适当调整。另外，BPxN1—x薄膜与液晶层能较好匹配等特性更使其适用于紫外空间光调制器。     

Passivation effects of deuterium exposure on boron-doped CVD homoepitaxial diamond

The deuterium (hydrogen) passivation effect on acceptors in boron-doped CVD homoepitaxial diamond was studied by electrical (Hall-effect) and secondary ion mass spectroscopy (SIMS) measurements. Deuterium was incorporated into the samples using microwave (MW) deuterium plasma at 673 K for 2–24 h. We observed the progress of acceptor passivation with p-type conduction, which finally resulted in a highly resistive state.     

Dynamic Waveband Switching in WDM Mesh Networks Based on a Generic Auxiliary Graph Model

Waveband switching (WBS) is a promising technique to reduce the switching and transmission costs in the optical domain of a wavelength-division multiplexing (WDM) network. This paper considers the problem of provisioning dynamic traffic using WBS in a WDM mesh network. The network of interest is a homogeneous WBS network, where each node has the functionality of WBS. The problem is called the dynamic WBS problem, which involves searching waveband-routes or wavelength-routes for the dynamically arriving traffic requests. The objective is to minimize the total switching and transmission costs in the optical domain. To solve the dynamic WBS problem, an auxiliary graph model capturing the network state is proposed. Based on the auxiliary graph, two heuristic on-line WBS algorithms with different waveband grouping policies are proposed, namely the wavelength-first WBS algorithm based on the auxiliary graph (WFAUG) and the waveband-first WBS algorithm based on the auxiliary graph (BFAUG). Simulation results indicate that WBS is an attractive technique which reduces the overall switching and transmission costs by up to 30% in the network. The results also show that the WFAUG algorithm outperforms the BFAUG algorithm in terms of port savings and cost savings.     

不锈钢管子—管板的激光焊接

试验研究了不锈钢的深溶焊接。研究了聚焦光束回转的光具。在工件不动的情况下,焊接管子—管板连接环缝。焊缝质量满足压力容器的要求,焊接效率大大提高。     

光学系统中离轴性公差的计算机设计

运用不共轴光学系统的光路计算和象质评价理论，通过共轴光学系统中光学表面，光学元件，部件的小位移和微倾斜，对切比雪夫综合象质函数计算相应的有关限差分，以掌握各种离轴性误差对象质的危害程度，再按多元函数的极值理论和适应度性优化技术自动妥共轴光学系统中各种轴性公差，并进行反馈和非线性处理；达到公差的最优化分配。     

Theoretical Analysis of Critical period in Microbend Fiberoptic Sensor

1IntrodctionThesdV8fltsg6Sofffi1CY0bCfldf山CY0ptlCS6fiS0f8f6lflt6llSltyffiDdU18tlflgsliddCtCCtlflg，simpletechnique，highrellabllltyandlowprice，thereformlcrobendfiberoptlcsensorIswidelyusedtomeasurementofstrain，stressandv比rationetc．Inpractice，thesensltlvltyofsensorIsaveryimportantparameter，andthesensltlvltyofmlcrobendf山eroptlcsensorIsmainlyrelat-6dtofoil0WlflgthY66f8CtofS［‘-：ffilCfob6fldsffiplltlld6：fillffib6yofthlCY0b6fldS6Ct10llSsfldffil-crobendperiod，andmlcrobendperio…     

多信道光纤环形网络结构分析

本文对多信道光纤环形网络结构进行了详细分析，推导出环网内平均路经长度和最大直径计算公式，并分析了最佳多信道光纤环网结构。