鱼类下行过坝的导鱼栅系统设计及试验研究

以龙开口水利枢纽为例,提出一种辅助鱼类下行过坝的导鱼栅系统方案。该方案首先结合大坝泄流建筑物的特点确定导鱼栅系统的布置位置,然后以鳙鱼为试验对象,用控制变量法并选择四种导鱼栅叶片角（15°、30°、45°、90°）和三种导鱼栅布置角（15°、30°、45°）在室内开展模型试验,以确定最优运行工况。研究结果表明,导鱼栅系统布置在该枢纽的灌溉引水口最佳。试验中,当布置角控制为30°时,四种叶片角下的鱼类通过率分别为53%、95%、59%和72%;当叶片角控制为30°时,三种布置角下的鱼类通过率分别为53%、95%和41%。因此,在导鱼栅叶片角和布置角同为30°时,导鱼栅系统辅助鱼类下行的效率最高,通过率为95%。研究成果可为我国类似导鱼栅系统设计提供参考。     

Comparison of the Effect of a Hydrocarbon Oil and a Terpene Tackifier on the Autohesion of Styrene-Butadiene Rubber

Blends of uncrosslinked styrene-butadiene rubber (SBR) with a terpene tackifier resin or a naphthenic oil have been characterized, and their autohesion and cohesion determined using a T-peel geometry. SBR/oil blends are homogeneous at all proportions, while SBR/resin blends, based on DSC and DMA analysis, undergo bulk phase separation at about 50% resin. However, migration of tackifier to the surface region is proposed at much lower resin contents. Compositions diluted with oil have autohesion similar to the neat SBR. This is attributed to compensating effects; although oil hastens self-bond formation by increasing chain mobility, this is nearly equally balanced by more facile chain separation during bond rupture. In short, oil-diluted compositions are soft and weak. On the other hand, SBR compositions containing small amounts of resin have high autohesion. Resin-diluted specimens deform easily at low strain, just as those containing oil, but intertwined chains of the former have greater resistance to separation, due at least in part to higher glass transition temperatures. It is proposed that autohesion is further enhanced by migration of tackifier to the surface. This causes SBR/resin compositions to be both soft and strong-a necessary condition for high autohesion.     

Performance of a Vertical‐Slot Fish Pass for the Sea Lamprey Petromyzon marinus L. and Habitat Recolonization

In 2011, a vertical‐slot fish pass was built at the Coimbra Açude‐Ponte dam (Mondego River, Portugal), approximately 45 km upstream from the river mouth. The performance of this infrastructure for sea lamprey passage was evaluated between 2011 and 2015 using several complementary methodologies, namely radio telemetry [conventional and electromyogram (EMG)], passive integrated transponder (PIT) telemetry and electrofishing surveys. During the study period, the electrofishing revealed a 29‐fold increase in the abundance of larval sea lamprey upstream of the fish pass. Of the 20 radio‐tagged individuals released downstream from the dam, 33% managed to find and successfully surpass the obstacle in less than 2 weeks, reaching the spawning areas located in the upstream stretch of the main river and in one important tributary. Fish pass efficiency was assessed with a PIT antenna installed in the last upstream pool and revealed a 31% efficiency, with differences between and within migratory seasons. Time of day and river flow significantly influenced the attraction efficiency of the fish pass, with lampreys negotiating it mainly during the night period and when discharge was below 50 m³ s^?1. Sea lampreys tagged with EMG transmitters took 3 h to negotiate the fish pass, during which high muscular effort was only registered during passage, or passage attempts, of the vertical slots. The use of complementary methodologies provided a comprehensive passage evaluation for sea lamprey, a species for which there is a considerable paucity of valuable data concerning behavioural, physiological and environmental influences on obstacle negotiation. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.     

Fat-simulating and accelerating solvents for polyolefins and MWD of solvent extracts of polyethylenes

Migration kinetics of straight-chain oligomers and antioxidants from several polyolefins at different temperatures into various solvents have been studied by radioactive tracer techniques. Anhydrous ethanol appears to be a well suited food-oil or liquid-fat simulant for extracting different types of migrants from polyolefins. Pure and mixed triglycerides are also good oil or fat simulants, but the triglycerides offer no simpler analytical procedures than the use of oil or fat themselves. n-Octanol may also be considered as a reasonable oil or fat simulant; however, its action depends somewhat on the choice of migrants. The accelerating action of n-heptane over that of oil or simulants is quantitatively demonstrated. The accelerating effects are greater for migration systems with lower diffusion coefficients. The diffusion coefficients for migration into n-heptane are about 20 times greater than the diffusion coefficients into ethanol or oil for otherwise identical migration systems yielding diffusion coefficients of about 10^?7 cm²s^?1 into oil or ethanol. For systems yielding diffusion coefficients into oil or ethanol of about 10^?12 cm²s^?1, the corresponding diffusion coefficients into n-heptane are about 1000 times greater. The molecular weight distributions (MWDs) of the n-heptane and ethanol extracts of polyolefins have been analysed. n-Heptane can not only accelerate the migration of the individual migrant but also remove oligomer species that are slightly soluble or present at low levels in the oil or simulant extracts.     

磁盘阵列环境下的取证目标系统重构

封存原始硬盘与业务系统服务的连续性是计算机取证中面临的一对矛盾。在独立硬盘环境中,问题的解决并不困难,但在磁盘阵列(RAID)环境下,目前还缺乏有效的解决办法。为此,为RAID环境下的取证目标系统的重构提出一套解决方案,并设计实现其中关键任务的处理软件。实验表明,该方法可适用于不同RAID等级、不同操作系统下的系统重构,使得用户感受不到重构得到的系统与原系统有任何差异。与数据同步方法相比,该方法可以有效地减少重构的时间开销,且不会破坏原始证据硬盘上的数据。     

整体数据存储技术在EMTDC快照功能中的应用

介绍了EMTDC软件快照功能的基本原理,提出了一种基于数据整体存取技术实现EMTDC仿真模型快照数据存取功能的方法。该方法以应用程序为单位构造成员变量结构体,以结构体为单位对快照数据进行存储空间的分配和恢复,以页面为单位进行数据的刷新,不需要区分单个变量的数据类型,也不需要为每个变量分别添加快照功能的处理代码,有效地提高了程序代码的开发效率和执行效率。     

基于多GPU集群的编程框架

现如今,GPU作为一种低功耗高性能图形处理器单元,被广泛应用于高度并行化的应用程序中。其线程和内存的层次结构在诸多成功的多线程应用和科学研究中表现出巨大的优势。为了简化多GPU集群的编程模式以及更好地利用GPU的计算性能,设计并实现了一个新的基于多GPU的MapReduce并行编程框架。使用了并行虚拟文件系统（PVFS）来存储数据,考虑了动态的负载平衡和GPU相关的权重要素以达到优化系统的效率、透明性以及系统的可伸缩性的目的。在文中,将演示使用该编程模式解决地质应用的一个典型的偏移应用-叠前时间偏移（PKTM）,并给出实验结果。     

On the relationship between pore structure and chloride diffusivity from accelerated chloride migration test in cement-based materials

In this study the electrochemical technique is applied to accelerate chloride ion migration in concrete to determine the chloride ions in anode cell, and the pore characteristic of the same mortars in concrete was obtained from the mercury intrusion porosimetry (MIP). The plain ordinary Portland cement and the constant aggregate with eight w/c ratios ranging from 0.3 to 0.65 were used. A good linear relationship between the steady-state migration coefficient and non-steady-state migration coefficient based on the same experimental setup and specimens was obtained. Both of the steady-state migration coefficient and non-steady-state migration coefficient were linearly related to the capillary pore volume and the critical pore diameter.     

在文明寨地区的高精度地震资料处理实践

文明寨地区构造复杂，断块多，岩性变化大，一些地质问题不明，需要高精度三维资料处理来提高资料的纵、横向分辨率^[1][2]及为储层、油藏研究提供精确的依据。针对东濮文明寨地区高精度处理过程中的关键技术进行了大量分析试验，形成了一套适合东濮地区的较为完整的3D高精度地震资料处理流程。实际资料处理表明效果较好。     

Study of siloxane additives migration to the surface of polyester-(melamine)-polyurethane coatings: Aging effects after ethanol cleaning

This study determines the influences of siloxane flow agents’ migration on the outermost surface composition of clearcoats, before and after ethanol cleaning. This evaluation is undertaken to improve adhesion of pressure-sensitive adhesives (PSAs) on automotive paint systems. Most of the siloxane flow agents segregate from the bulk to the clearcoat outermost surface during curing. These additives can cover until 50% of the surface area but X-ray photoelectron spectroscopy (XPS) and time of flight-secondary ion mass spectrometry (ToF-SIMS) analyses indicate that they can be removed by ethanol cleaning. Composition of the cleaned clearcoats surfaces are similar as the composition of clearcoat formulated without siloxane additives: the polyester-(melamine)-polyurethane network is more detected than before cleaning. However, outermost surface analyses show that several aging weeks increase the siloxane additives segregation. This post-cleaning migration modifies the clearcoat surface composition and cancels the chemical modifications due to the ethanol cleaning. XPS analyses show that silicon concentrations after cleaning and aging are inversely proportional to the initial silicon concentrations measured after curing. It highlights that aging has to be controlled to improve adhesion of PSAs on clearcoats. A second ethanol cleaning on aged clearcoats is not effective to remove these new siloxane additives. Their formulation should be different from the flow agents and it could modify their solubility in ethanol. This result could also indicate that these new siloxane additives are not located on the last molecular layer of surface and they would not be soluble in ethanol.