电解法处理利福霉素SV钠废渣分离液的研究

根据电化学原理，采用电解法，利用铁屑与炭粒作电极，处理利福霉素SV钠药渣分离液，讨论各种因素对分离液污染物作效果的影响，COD去除率可达91．8％左右，脱色率可达95％左右。     

氯化聚乙烯接枝氯乙烯聚合速率及传热

本文用气相色谱技术研究氯化聚乙烯(CPE)-接枝(g)-氯乙烯(VC)聚合动力学,对不同引发剂体系分析热负荷分布,并对7 m~3聚合釜传热面进行校核。     

Effects of apitong (Dipterocarpus spp.) extractives on bond strength development and curing rate of adhesives

Emulsion polymer isocyanate ( ), polyvinyl acetate ( ) and resorcinol-formaldehyde ( ) adhesives were used to produce single lap shear specimens using resinous and non-resinous apitong (Dipterocarpus spp.) timbers. Tests showed that joints made with highly resinous apitong were about 40% weaker than similar joints made with non-resinous apitong. The resinous apitong was treated with different solvents to yield five different extractives which were characterized by infra-red analysis. Apitong extractives were then added to and adhesives and joints made with buna (Fagus crenata), a timber known to be low in extractives and easy to bond. Joints prepared using extractive-containing adhesives were generally weaker than those made with the unmodified adhesives. RF adhesives containing extractives cured more slowly than unmodified . It is thought that the acidic nature of the extractives changes the pH of the system sufficiently to affect the curing mechanism     

基于主成分分析中的几类问题的计算公式及结论

讨论了主成分分析中的几类问题的计算方法,重点揭示在协方差矩阵中对角元素相同时的第一主成分及贡献率和对角元素不同时的主成分贡献率．经讨论后给出有关计算公式,并说明这些计算公式在多元统计分析中的实际作用     

应变空间中一般加载规律的弹塑性本构关系

为了建立多维应力、应变空间的弹塑性本构关系,将一般加载规律一维全量理论的简单弹塑性模型推广到一般加载规律的多维增量理论,并且给出应力空间的加载函数和应变空间的加载函数以及它们之间的正确的变换关系.在此基础上,在应变空间中建立了推导一般加载规律的多维增量理论的本构关系的一种途径.应用这种途径,从应变空间的加载函数出发,推导了等向强化材料的一般加载规律的弹塑性本构关系.理论和实例表明,这种途径对等向强化材料、随动强化材料、理想弹塑性材料和热弹塑性问题都适用.     

分层码率控制策略在机器人遥操作中的应用

为实现卫星自维护遥操作系统中稳定可靠的视频反馈目标,提出一种基于分层码率控制的视频传输策略.利用实时探测到的带宽选择不同码率的视频流分层,使得视频传输对于不同的网络带宽具有自适应性.试验结果表明,该策略能够在波动带宽下给予遥操作者稳定流畅的视频反馈,有效地提高了遥操作系统的视觉临场感性能.     

TH-PPM UWB通信系统多址性能研究

介绍了TH-PPM UWB信号,在AWGN信道和多用户干扰条件下对系统的性能进行了分析,包括误码率分析和系统所能接入的最大用户数,对其误码率进行了仿真.结果表明,随着接入用户数目的增加,系统误码率也增加,而增大重复码长度和脉冲重复时间则可降低系统误码率,但增加脉冲重复时间会降低信息传输速率.     

考虑冷变形加工硬化的翻边力理论计算

在分析现有计算公式存在不足的基础上,根据翻边变形区材料的应力应变特点,考虑了冷变形加工硬化(取幂函数硬化规律)和变形区材料厚度变化(翻边为变薄)两个因素的影响,利用金属塑性成形问题求解理论中的主应力法,推导和提出了圆孔翻边力计算的一个新公式.通过用钢板(SPCC)和铜板(T1)进行了翻边工艺试验的验证,并与经验公式和现有理论公式的计算结果进行了比较,表明新公式计算结果能接近于实际,且原理上更为科学合理.     

Zipf定律在划定经济区域内的实证研究——以长江三角洲经济区为例

国外关于Zipf定律的实证研究的区域空间多采用国家层次,而国内关于Zipf定律的实证研究则涉及国家、跨省的经济区及行政省的不同层次,于是这就有可能存在经济区域空间划定是否合理的问题。现以长江三角洲地区为例,通过修正的引力模型计算城市之间的经济联系强度及潜能,以此进行长江三角洲经济区域的空间划定,并在划定的经济区域内进行Zipf定律的实证研究,以验证经济区域空间划定是否合理。研究结果显示了经济区域空间划定的合理性。     

A macro-meso constitutive law for concrete having imperfect interface and nonlinear matrix

The overall behavior of concrete depends on its meso structures such as aggregate shape, interface status, and mortar matrix property. The two key meso structure characters of concrete, bond status of interface and nonlinear property of matrix, are considered in focus. The variational structure principle is adopted to establish the macro-meso constitutive law of concrete. Specially, a linear reference composite material is selected to make its effective behavior approach the nonlinear overall behavior of concrete. And the overall property of linear reference composite can be estimated by classical estimation method such as self-consistent estimates method and Mori-Tanaka method. This variational structure method involves an optimum problem ultimately. Finally, the macro-meso constitutive law of concrete is established by optimizing the shear modulus of matrix of the linear reference composite. By analyzing the constitutive relation of concrete established, we find that the brittleness of concrete stems from the imperfect interface and the shear dilation property of concrete comes from the micro holes contained in concrete. Supported by the National Natural Science Foundation of China (Grant Nos. 50679022, 90510017, 50539090) and National Basic Research Program of China (Grant No. 2007CB714104)