高速钢高温形变诱发析出的研究

本文探讨了高速钢在高温形变过程中碳化物析出的行为及奥氏体组织状态对析出的影响。用透射电镜和扫描电镜分析了不同热处理状态奥氏体的组织结构,分析了高温形变过程中碳化物析出的部位,颗粒尺寸及形态。试验表明, 碳化物主要在奥氏体的缺陷处呈点状和点列状析出,大小为20mμ。处于回复状态的奥氏体缺陷诱发碳化物析出,析出碳化物钉札缺陷阻止再结晶进行。当再结晶驱动力较大时,由于动态再结晶充分发展,使缺陷大量消除,碳化物析出显著地减少。     

How Meta-Analysis Increases Statistical Power.

One of the most frequently cited reasons for conducting a meta-analysis is the increase in statistical power that it affords a reviewer. This article demonstrates that fixed-effects meta-analysis increases statistical power by reducing the standard error of the weighted average effect size (T?.) and, in so doing, shrinks the confidence interval around T?.. Small confidence intervals make it more likely for reviewers to detect nonzero population effects, thereby increasing statistical power. Smaller confidence intervals also represent increased precision of the estimated population effect size. Computational examples are provided for 3 effect-size indices: d (standardized mean difference), Pearson's r, and odds ratios. Random-effects meta-analyses also may show increased statistical power and a smaller standard error of the weighted average effect size. However, the authors demonstrate that increasing the number of studies in a random-effects meta-analysis does not always increase statistical power. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of Billet Size on Flow, Solidification and Solute Transport in Continuous Casting

ListofSymbol　　B———Buoyancy ,m·s- 2 ;　　c———Concentrationofsoluteelement ;　　Cμ———Turbulentconstant;　　D———Diffusivityofsoluteelement ,m2 ·s- 1 ;　　fl,fs———Liquidandsolidfraction ;　　fμ———Turbulentcoefficient ;　　h———Enthalpy ,J·kg- 1 ;　　k———Turbulentkineticenergy ,m2 ·s- 2 ;　　kp———Equilibriumpartitioncoefficient;　　Kp———Permeabilityofmushyzone ,m2 ;　　K0 ———Permeabilitycoefficient;　　p———Pressure ,Pa ;　　Pr———Prandtlnumber ;…     

套管钻井用套管外表面磨损后剩余强度分析

在分析讨论套管钻井管柱磨损形态的基础上,结合API5C5实物试验尺寸要求,通过有限元计算分析方法,对钻井套管完钻后含有外表面磨损缺陷的套管柱的极限剩余抗挤强度和极限剩余抗拉强度进行了研究,分别获得了均匀磨损和偏磨条件下,套管钻井套管柱外表面磨损缺陷的临界长度尺寸数值,以及不同破坏失效准则条件下的剩余抗挤强度和剩余抗拉强度的计算方程,为套管钻井中套管柱的设计、计算奠定了理论基础。     

Sorption of Acid Green 25 on chitosan: Influence of experimental parameters on uptake kinetics and sorption isotherms

Acid Green 25, which is a diazoic dye bearing two sulfonic groups, is efficiently sorbed on chitosan. The protonation of chitosan may explain the electrostatic attraction of this anionic dye and that its optimum pH is close to 3. Preliminary protonation of amine groups (obtained by contact with a sulfuric acid solution) reduced the variation of solution pH following sorbent addition but significantly reduced sorption performance: the maximum sorption capacity of raw chitosan, 525 mg dye/g (0.84 mmol dye/g), was halved by acidic preconditioning. The acidic conditioning also reduced the kinetic rate—the time necessary to reach equilibrium increased up to threefold depending on the experimental conditions. The size of sorbent particles influenced sorption kinetics and equilibrium because of resistance to intraparticle diffusion, but the sorption appeared to occur not only at the surface of the sorbent but also in the intraparticle network of the polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1073–1080, 2003     

尺度目标识别中的若干技术问题

从工程应用的角度阐述了现代鱼雷常用的尺度目标识别原理，讨论了影响识别距离的若干因素和措施，提出了小尺度模拟靶通过亮点延时算法以弥补尺度不足及其试验技术，试验结果表明，该方法可以获得良好效果。     

溅射靶材的应用及制备初探

随着电子及信息产业突飞猛进的发展，世界溅射靶材的需求越来越多，本文介绍了靶材的发展概况、分类和应用情况，以及靶材的特性要求．探讨Ni-Cr合金靶材的制备工艺，结果表明，产品能满足靶材特性要求。     

磷酸酯淀粉在纯棉细特高密织物浆纱中的应用

就磷酸酯淀粉在纯棉细号高密织物中的上浆情况进行了试验，提出了具体浆纱工艺和减少织造断头率，提高织物效率及布面质量对策，实验表明，磷酸酯淀粉完全适应于纯绵细特高密织物的上浆要求。     

Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。