Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

SiC粒子增强铸造Al基复合材料的研制

本文用真空烘烤封罐法对 SiC 粒子进行预处理,在固液两相区内搅拌添加,制造了铸造 Al 基复合材料。测试表明,该复合材料具有铸造性能好,力学性能高的优点,适用于采用压铸、石膏型精密铸造、金属型铸造等工艺方法成型的活塞、连杆等要求苛刻的零件。     

上向分层尾砂充填法在仓上金矿的新应用

本文介绍了垂直矿体走向布置的上向分层尾砂充填采矿法新方案的特点及其在仓上金矿中厚矿体的具体应用。     

Electrical and optical properties of MoO3-V2O5 mixed oxide films

Vacuum deposited MoO₃-V₂O₅ films of different molar concentrations have been used for DC electrical conductivity studies at different temperatures. The optical absorption spectra of MoO₃-V₂O₅ films of different molar concentrations have been measured. From these measurements it is found that optical band gap and activation energy vary with molar concentration of MoO₃-V₂O₅ films.     

颗粒增强TiAl基复合材料及其Si的韧化作用研究EI

运用ＸＤ工艺制备了颗粒增强ＴｉＡｌ基复合材料。增强颗粒均匀分布于ＴｉＡｌ基体中并细化ＴｉＡｌ合金。通过在ＴｉＢ_２／ＴｉＡｌ、ＴｉＣ／ＴｉＡｌ复合材料中加入适量的Ｓｉ，颗粒增强ＴｉＡｌ基复合材料的室温延性得到了改善。     

机械合金化Al－Al_3Ti复合材料的研究进展

本文综述了机械合金化Ａｌ－Ａｌ_３Ｔｉ材料的发展现状，论述了增强体Ａｌ_３Ｔｉ的性质和机械合金化制备的Ａｌ－Ａｌ_３Ｔｉ的组织与性能。采用机械合金化制备的Ａｌ－Ａｌ_３Ｔｉ具有理想的组织。相当高的强度与塑性，良好的热强性。目前对机械合金化制备的Ａｌ－Ａｌ_３Ｔｉ的研究不够深入，还需进行大量的工作。     

SiCf/O′-SiAlON composite: properties and oxidation retained properties

A composite of O′SiAlON (Si_2-xAl_xN_2-xO_1+x, with x 0.14) reinforced with 20 vol.% SiC monofilaments was fabricated by hot-pressing, at 1600°C, for 2 h under 34 MPa pressure. The mechanical and interfacial properties of the composites, as-fabricated as well as post-oxidized, were, investigated. The composite exhibited a significant improvement in ultimate flexure strength (640 MPa) and work of fracture (42 kJ m⁻²) compared with that (350 MPa and 1.8 kJ m⁻², respectively) of the monolithic material. These mechanical properties were slightly increased after the composite was heat treated for 24 h in air at 1200 and 1300°C. However, the composite exhibited a significant degradation in ultimate strength, while the work of fracture (WOF) remained unchanged after exposure in air at temperatures beyond 1400°C. The as-fabricated composite revealed a low interfacial shear strength (6.2 MPa) and a frictional sliding stress (3.2 MPa). After the composite was oxidized at elevated temperatures, the interfacial bonding and sliding stresses were reduced to noticeable extents, resulting from the degradation of the carbon coating layer of the SiC monofilaments.     

Handling of fine-particles by time-averaged particle driving method in plasmas

We developed a noble technique for the fine-particle handling in plasmas. In this method a pair of point electrodes are introduced in the plasma, to which positive pulses are applied alternatively. When the pulse repetition period is shorter than the particle response time, the particles feel only time-averaged force because of their large mass. Spatial profile of the equivalent potential of the time-averaged force varies from a circle to an ellipse with an increase in the local discharge at the electrodes. The particles are eventually transported toward a middle point between two point-electrodes, being almost independent of their initial positions. This method is quite effective for converging fine particles in the plasma.     

纤维表面处理对植物纤维增强水泥的物理力学性能影响

植物纤维增强水泥的力学性能具有湿敏感性，随湿度增加弯曲强度下降幅度较大。本文工作采用的几种浸渍处理纤维表面的方法，有效地改善了这种状况，其中一种经处理的纤维增强水泥较没有处理的对比试样在饱水状态下的弯曲强度提高了67％，气干状态提高了18％，缩小了二者间的差距。     

房屋基础因地道塌陷的加固处理

本文通过对房屋基础因地道塌陷事故的处理，提出一种结构受力合理、施工便利、经济性好的基础加固新方法，供今后实际工程事故处理时参考。