甲醛法测定铵盐含氮量

对甲醛法测定铵盐含氮量进行了研究，提出采用百里酚酞和酚酞混和指示剂进行测定。该法简单、快速、准确，能满足生产实际和样品检验需要。     

Pullout behavior of polypropylene fibers from cementitious matrix

A comprehensive experimental investigation was performed to understand the pullout behavior of polypropylene fibers from a cementitious matrix. The effect of embedded length on the pullout characteristics, the development of the interfacial bond with age of curing of matrix and the effect of exposure to degrading environments, like seawater and salt water, on the interfacial bond between the fibers and cementitious matrix were studied. The aim of these experiments was to understand the properties of fiber/matrix interface, which are of primary significance in predicting the overall behavior of fiber-reinforced cement-based composites. Polypropylene fibers have a weak bond with cementitious matrix because of smooth surface of fibers, which does not allow for sufficient friction to develop between the two. In this study a new method to improve the frictional bond by means of mechanical indentations of fibers was also proposed. The bonding performance was characterized by means of pullout tests of the plain and modified fibers from a cementitious matrix. An optimum level of fiber modification for maximization of bond efficiency was determined experimentally.     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratio

In this study, the monodisperse–macroporous particles produced by a relatively new polymerization protocol, the so‐called, “modified seeded polymerization,” were used as column‐packing material in the reversed phase chromatography (RPC) of proteins. The particles were synthesized in the form of styrene‐divinylbenzene copolymer approximately 7.5 μm in size. In the first stage of the synthesis, the monodisperse polystyrene particles 4.4 μm in size were obtained by dispersion polymerization and used as the “seed latex.” The seed particles were swollen by a low‐molecular‐weight organic agent and then by a monomer mixture. The monodisperse–macroporous particles were obtained by the polymerization of monomer mixture in the seed particles. In the proposed polymerization protocol, the number of successive swelling stages was reduced with respect to the present techniques by the use of sufficiently large particles with an appropriate average molecular weight as the seed latex. A series of particles with different porosity properties was obtained by varying the monomer/seed latex ratio. The separation behavior of HPLC columns including the produced particles as packing material was investigated in the RPC mode using a protein mixture including albumin, lysozyme, cytochrome c, and ribonuclease A. The chromatograms were obtained with different flow rates under an acetonitrile–water gradient. The theoretical plate number increased and chromatograms with higher resolutions were obtained with the particles produced by using a lower monomer/seed latex ratio. The separation ability of the column could be protected over a wide range of flow rates (i.e., 0.5–3 mL/min) with most of the materials tested. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 607–618, 2004     

ON THE DYNAMICS OF THE COMBUSTION OF SINGLE CHAR PARTICLES

Diffusion and reaction models of varying complexity are used to study the stability of the combustion of single char particles. In contrast to past studies which have considered only the reaction of carbon with oxygen, both the heterogeneous reactions of carbon with oxygen and carbon dioxide and the homogeneous oxidation of carbon monoxide are taken into account in the formulation of the mathematical models. Emphasis is placed on the investigation of the feasibility of occurrence of oscillatory combustion. Our results show that high rates of the C-O₂ reaction and high concentration of O₂ in the ambient favor the occurrence of multiple steady states and oscillatory solutions, but the appearance of oscillatory instability is suppressed by the homogeneous reaction in the gas phase and the presence of CO and CO₂ in the ambient. The parametric investigation of the problem reveals, in agreement with the results of past studies, that the heat capacity of the porous solid, the Lewis number, and the thickness of the stagnant film are three key parameters for the occurrence of the oscillatory response of the system. Reasonably large values of solid heat capacity practically eliminate the possibility of oscillatory combustion, but an appropriate combination of large values of stagnant film thickness and small Lewis numbers may offset the effect of solid heat capacity     

Monodisperse‐porous poly(styrene‐co‐divinylbenzene) beads providing high column efficiency in reversed phase HPLC

A multistage polymerization protocol, the so‐called “modified seeded polymerization,” was developed for the production of monodisperse‐porous poly(styrene‐co‐divinylbenzene) providing high column efficiency as a packing material in reversed phase high performance liquid chromatography (RPLC). In the first stage of the multistage production, uniform polystyrene seed particles, produced by dispersion polymerization, were swollen by an organic agent (i.e., the diluent) and then by a monomer mixture containing styrene and divinylbenzene. The final porous particles were obtained in the monodisperse form by the polymerization of monomer mixture in the seed particles. By the use of a small size seed latex with low molecular weight and by the selection of the appropriate diluent, relatively small monodisperse‐porous particles with suitable pore structure could be achieved. In the reversed phase separation of alkylbenzenes, under isocratic conditions, theoretical plate numbers up to 40,000 plates/m were achieved by using 5.2 μm porous particles, obtained by a toluene‐dibutyl phthalate mixture as the diluent. No significant decrease in the resolution power was observed by the fourfold increase in the mobile phase flow rate. The column efficiency and the resolution observed with 5.2 μm monodisperse‐porous particles were significantly higher with respect to the currently available polymer based packing materials used in the reversed phase HPLC. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1430–1438, 2005     

超薄聚合物表面上滴状冷凝的传热研究

本文采用等离子体聚合和离子束动态混合注入技术在不同的基材(黄铜、紫铜、不锈钢和碳钢)上制备了聚六氟丙烯和聚四氟乙烯的超薄膜,并进行了垂直管外的水蒸汽的滴状冷凝实验。实验发现,对于不同的基材,表面制备的工艺参数对冷凝传热性能及维持滴状冷凝的寿命具有显著的影响。表面性能的测试和估算为预测给定蒸汽在某表面是否成滴提供了依据。     

玻纤增强PA66／PP合金的特性及应用

介绍玻纤增强ＰＡ６６／ＰＰ合金的制备工艺及特性，与纯尼龙６６树脂相比，加工性能好，综合性能优异。该材料适用于中小型油浸式变压器的分接开关及其它绝缘部件。     

Oxidation of acrolein on a multicomponent oxide catalyst

Catalytic oxidation of acrolein to acrylic acid has been studied and the optimum composition of the multicomponent catalyst Mo _a V _b Cu _c Fe _d O _x has been found. The reaction kinetics has been measured.     

Comparison of the Effect of a Hydrocarbon Oil and a Terpene Tackifier on the Autohesion of Styrene-Butadiene Rubber

Blends of uncrosslinked styrene-butadiene rubber (SBR) with a terpene tackifier resin or a naphthenic oil have been characterized, and their autohesion and cohesion determined using a T-peel geometry. SBR/oil blends are homogeneous at all proportions, while SBR/resin blends, based on DSC and DMA analysis, undergo bulk phase separation at about 50% resin. However, migration of tackifier to the surface region is proposed at much lower resin contents. Compositions diluted with oil have autohesion similar to the neat SBR. This is attributed to compensating effects; although oil hastens self-bond formation by increasing chain mobility, this is nearly equally balanced by more facile chain separation during bond rupture. In short, oil-diluted compositions are soft and weak. On the other hand, SBR compositions containing small amounts of resin have high autohesion. Resin-diluted specimens deform easily at low strain, just as those containing oil, but intertwined chains of the former have greater resistance to separation, due at least in part to higher glass transition temperatures. It is proposed that autohesion is further enhanced by migration of tackifier to the surface. This causes SBR/resin compositions to be both soft and strong-a necessary condition for high autohesion.