Surface Preparation of Tantalum for Encapsulation and Adhesive Bonding

A number of methods of surface preparation of tantalum for encapsulation in silicone rubber and for structural adhesive bonding were explored. The only ones which could be generally useful were boiling for 24 hours in distilled water (28% improvement) or boiling for 4 hours in 20% sodium hydroxide solution followed by boiling for 2 hours in dilute hydrochloric acid (34% improvement). An alternative, which could sometimes be used, was heating in air for at least 2 hours at 100°C.     

HT-730改性酚醛-丁腈胶粘剂的研制

对酚醛-丁腈胶粘剂进行改性，添加5．0％的硅烷偶联剂，改善了酚醛-丁腈胶粘剂的工艺性能，提高了粘接强度，特别是降低了酚醛-丁腈胶对环境湿度的敏感性。研制的HT-730胶在环境湿度90％时仍有很高的粘接强度，同时老化性能和适用期并没有受到影响。     

Polyesters from renewable resources: Preparation and characterization

Polyesters were synthesized with monoglycerides prepared from rubber seed oil, a renewable resource. Monoglycerides were obtained by an alcoholysis method from the oil, which was neat or modified by treatments with different amounts of maleic anhydride at 230°C. The polyester resins were subsequently prepared by the condensation polymerization of the monoglycerides with phthalic anhydride. The monoglycerides and resins were characterized by spectroscopic analysis and measurements of the physicochemical properties. The chemical resistance of the polyesters was also studied. The results revealed that the polyesters prepared from the modified monoglycerides possessed better properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3748–3755, 2006     

Vinyl‐containing silicone resin as the crosslinking agent of heat‐curable silicone rubber

Heat‐curable silicone rubber (HCSR) was prepared by using vinyl‐containing silicone resin (VSR) as the crosslinking agent instead of polyvinylsilicone oil (C gum). Mechanical properties and crosslink density of the vulcanizates were measured. The results indicate that VSR is a good crosslinking agent for HCSR. The tensile strength, tearing strength, elongation at break, and hardness of the vulcanizate can reach 10.2 MPa, 29.1 kN/m, 720%, and 58 SHA, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3123–3127, 2002; DOI 10.1002/app.10054     

混炼硅橡胶的配合技术(四)

介绍了几种胶辊用混炼硅橡胶的配制,包括低硬度胶辊用混炼硅橡胶、低环硅氧烷含量的胶辊用混炼硅橡胶、送纸胶辊用混炼硅橡胶及工业胶辊用混炼硅橡胶的配制。     

橡胶对HIPS树脂落锤指标的影响

通过对高抗冲聚苯乙烯树脂出现产品落锤指标偏低问题的分析，从橡胶配量及其粒径大小上进行了改进，同时改进了工艺操作，采取了提高反应釜搅拌速度、降低乙苯浓度等措施。结果产品合格率达到９９％以上，优级品率达到９８％以上。     

冷冻凝聚工艺生产CR322的研制

对原电解质凝聚工艺生产CR322(混合调节型氯丁橡胶)进行了改进，实现了冷冻凝聚新工艺法生产切块CR322，即主乳化剂由松香皂／脂肪酸皂复合型代替了单一松香皂。新工艺解决了冷冻转鼓装置生产CR322过程中“黏杆”及干胶门尼黏度控制等问题。产品无焦烧粒子。且焦烧时间明显延长。     

PVC╱NBR╱BR三元共混弹性体的制备

采用结合丙烯腈含量为26％的NBR、分子量适中的悬浮法Ⅲ型PVC和BR共混,制得了综合性能较PVC/NBR并用胶优异的弹性体。优选的工艺条件为:PVC/NBR/BR=30/60/10(质量比);补强剂选用炭黑40份,超细碳酸钙50份,轻质碳酸钙20份;硫化体系选用过氧化物加少量硫磺;混炼温度为140—170℃,混炼时间为10—15min。通过电子显微镜和动态力学分析,弹性体存在两个T,PVC为分散相,橡胶为连续相。     

世界溶液丁苯橡胶的主要技术进展

评述了溶液丁苯橡胶的技术现状和主要技术进展。介绍了新型锡锂引发剂和用其制备的溶液丁苯橡胶的性能特点，特别是其突出的滚动阻力特性和在不损失湿牵引性下的优异耐磨性。分析了世界，特别是美国、欧洲和日本的溶液丁苯橡胶的需求现状及发展趋势。