气相法聚乙烯BCG-Ⅱ型催化剂的开发和应用

对气相法聚乙烯BCG-Ⅱ型催化剂的组成、粒径分布及催化剂的淤浆聚合性能进行了研究。研究结果表明，BCG—Ⅱ型催化剂的活性较高，聚合物堆密度适中，应用在Unipol乙烯气相聚合工艺装置上操作良好，所生产的树脂颗粒均匀。干爽且流动性好，产品质量合格、稳定。     

Phase Diagram for Liquid Crystalline Polymer/ Polycarbonate Blends

A novel mechanism to form binary polymer blends is through phase separation by spinodal decomposition in the unstable region of the phase diagram. The present work investigates the effects of thermally‐induced phase separation by spinodal decomposition on the morphology development of liquid crystalline polymer/polycarbonate blends. Moreover, a thermodynamic binary phase diagram is obtained using a twin‐screw extruder at various processing melt temperatures. Differential scanning calorimetry and scanning electron microscopy were used to study the miscibility of the blends and the resulting morphology. A thermodynamic binary phase diagram exhibiting a lower critical solution temperature was obtained. The droplet size distribution of the blend was also obtained and discussed in light of the Cahn‐Hilliard theory.     

美国能源部的浆态床F－T合成技术

浆态床Ｆ－Ｔ合成技术是美国能源部Ｆ－Ｔ合成技术的主要开发项目。本文就浆态相Ｆ－Ｔ合成催化剂的开发、中试示范实验和浆态反应器的化工基础研究作一扼要的介绍。     

Hydration Study of the System Ca3Al2O6–CaSO4· 2H2O–Ca(OH)2–H2O with and without Citric Acid

Hydration occurring in the system Ca₃Al₂O₆–CaSO₄· 2H₂O–Ca(OH)₂–H₂O has been studied at different temperatures and it was found that the reactions are diffusion controlled. The kinetic data obeyed Jander's equation and the rate of reaction increased with increasing temperature. X-ray diffraction studies and calorimetric measurements show that when gypsum is consumed, ettringite is converted into monosulfate. The rate of this conversion also increased with the increasing temperature and decreased in the presence of citric acid. Spectroscopic studies showed that there was some interaction between citric acid and the cement and that the product of hydration is of colloidal nature. Zeta potential measurements show that retardation of Ca₃Al₂O₆ hydration in the presence of gypsum and Ca(OH)₂ is not due to SO²⁻₄ adsorption. Electrical conductivity and thermoelectric potential measurements of solid Ca₃Al₂O₆ show that Ca₃Al₂O₆ is an n -type semiconductor and contains defects. The retardation of Ca₃Al₂O₆ may be due to poisoning of reaction sites by gypsum and Ca(OH)_2.     

MgO／Ni系梯度功能材料的设计与制备

对ＭｇＯ／Ｎｉ系梯度功能材料（ＦＧＭ），分别用实验和微观力学模型测定和计算了用于热应力缓和设计的各物性参数。讨论了两种结果之间存在差异的原因。用有限元方法模拟了制备过程中ＦＧＭ的热应力，得到ＭｇＯ／Ｎｉ系ＦＧＭ的综合设计准则。按设计结果进一步调整粉末工艺性质，成功地烧制出ＭｇＯ／Ｎｉ系ＦＧＭ。     

The Calcia–Zirconia Phase Diagram Revisited: Stability of the Ordered Phases φ1 and φ2

Single crystals of CaO-stabilized ZrO₂ containing between 15.3 and 18.9 mol% CaO were heat-treated for 5000 h at 1200°C to study the stability of the ordered defect-fluorite phase, CaZr₄O₉ (φ₁). Subsequent TEM analysis of the equiaxed φ₁ domains in samples richer than approximately 18 mol% in CaO showed a random distribution of φ₁ variants, with no preferred interfacial habit planes. A critical review of the literature, combined with the new data, supports the Stubican-Hellmann-Hannon version of the phase diagram in the region 15 to 26 mol% CaO and 1000° to 1400°C and strongly suggests that φ₁ is a stable phase in the ZrO₂-CaO systems.     

在特殊条件下汽车运行材料的选择

汽车的运行材料指的是对汽车的运行周期、消耗费用等有重大影响的非金属材料,一般包括车用燃料、润滑剂、制动液、冷却液、轮胎等。汽车在不同的工作环境下,对这些材料的合理选用也是不同的。在低温下,需要时刻保持机器的工作温度;在高温下,则需要采取措施来降低温度;而在高原上则对发动机的性能有更高的要求。本文主要对几种特殊工作条件下,如何合理的选取这些运行材料才能保证机器的正常运行,以及提高使用性能进行了简单的介绍和分析,这对提高汽车的可靠性,增加使用寿命有非常重要的意义。     

油水气三相流液体流量调节系统研究与设计

针对油水气三相流研究试验平台液体流量调节范围宽、范围度大的问题,提出采用3条主回路与3条旁通回流调节支路来覆盖所有的流量范围,设计了液相系统原理图及管路布置图,对3条旁通回流调节支路中调节阀的计算流量、计算压差及Kv值进行了计算,并对调节阀的开度及实际可调比进行了验算,结果表明选定的调节阀性能满足油水气三相流研究试验的要求。     

Field Validation of DNDC Model for Methane and Nitrous Oxide Emissions from Rice-based Production Systems of India

The DNDC (DeNitrification and DeComposition) model was tested against experimental data on CH₄ and N₂O emissions from rice fields at different geographical locations in India. There was a good agreement between the simulated and observed values of CH₄ and N₂O emissions. The difference between observed and simulated CH₄ emissions in all sites ranged from −11.6 to 62.5 kg C ha⁻¹ season⁻¹. Most discrepancies between simulated and observed seasonal fluxes were less than 20% of the field estimate of the seasonal flux. The relative deviation between observed and simulated cumulative N₂O emissions ranged from −237.8 to 28.6%. However, some discrepancies existed between observed and simulated seasonal patterns of CH₄ and N₂O emissions. The model simulated zero N₂O emissions from continuously flooded rice fields and poorly simulated CH₄ emissions from Allahabad site. For all other simulated cases, the model satisfactorily simulated the seasonal variations in greenhouse gas emission from paddy fields with different land management. The model also simulated the C and N balances in all the sites, including other gas fluxes, viz. CO₂, NO, NO₂, N₂ and NH₃ emissions. Sensitivity tests for CH₄ indicate that soil texture and pH significantly influenced the CH₄ emission. Changes in organic C content had a moderate influence on CH₄ emission on these sites. Introducing the mid-season drainage reduced CH₄ emissions significantly. Process-based biogeochemical modeling, as with DNDC, can help in identifying strategies for optimizing resource use, increasing productivity, closing yield gaps and reducing adverse environmental impacts.     

活性端基聚氨酯橡胶改性不饱和聚酯树脂的研究(Ⅱ)

通过在不饱和聚酯树脂中加入活性端基聚氨酯橡胶来降低树脂的体积收缩.树脂固化前,橡胶与不饱和聚酯树脂相溶性好;树脂固化时橡胶中的不饱和双键反应可参与反应,并呈一定粒径的胶粒析出.本文研究了几种活性端基聚氨酯橡胶对不饱和聚酯树脂收缩控制的影响.