Use of ultrafiltration for preparing improved tomato pulp

The characteristics of high-quality tomato pulp (commercial def.: crushed or diced tomatoes with about 30% tomato juice as packing medium) canned with tomato juice pulp enriched by ultrafiltration as packing medium were compared with those covered with conventional vacuum-concentrated juice.
Both hot- and cold-break products were prepared and those containing 20% serum-reduced packing juice proved to be the best, showing no signs of syneresis on storage and with improvements in sensory properties, colour and non-enzymatic browning; some volatile components were reduced.     

An economic and environmental assessment of biomass utilization in lignite‐fired power plants of Greece

The environmental and socio‐economic impacts of biomass utilization by co‐firing with brown coal in an existing thermoelectric unit in Greece or through its pure combustion in a new plant were studied and evaluated in this work. The 125 MW_e lignite‐fired power plant in Ptolemais Power Station (Western Macedonia) was used as reference system. The environmental benefits of the alternative biomass exploitation options were quantified based on the life cycle assessment methodology, as established by SETAC, while the BIOSEM technique was used to carry out socio‐economic calculations. The obtained results showed clear environmental benefits of both biomass utilization alternatives in comparison with the reference system. In addition, co‐firing biomass with lignite in an existing unit outperforms the combustion of biomass exclusively in a new plant, since it exhibits a better environmental performance and it is a low risk investment with immediate benefits. A biomass combustion unit requires a considerably higher capital investment and its benefits are more evident in the long run. Copyright © 2005 John Wiley & Sons, Ltd.     

Effects of washing with oxidising agents on the gel-forming ability and physicochemical properties of surimi produced from bigeye snapper (Priacanthus tayenus)

The effects of washing with hydrogen peroxide (H₂O₂) and sodium hypochlorite (NaOCl) solutions on the gel-forming ability and physicochemical properties of surimi produced from bigeye snapper (Priacanthus tayenus), stored in ice for up to 14 days, were investigated. Generally, pH and the trichloroacetic acid (TCA)-soluble peptide content of washed mince varied, depending on the type of oxidizing agent and storage time of the fish. With increasing time of storage, the pHs of water- and H₂O₂-washed mince were lower than that of NaOCl-washed mince (P < 0.05). However, no differences in the TCA-soluble peptide contents of the resulting mince washed with any media were observed (P > 0.05). Washing with 20 ppm NaOCl resulted in the highest increase in both the breaking force and the deformation of mince from fish stored in ice for all the times studied (P < 0.05). Natural actomyosin (NAM) extracted from NaOCl-washed mince had higher surface hydrophobicity and disulfide bond (SS) content than that of water-washed mince (P < 0.05). With no effect on Ca²⁺-, Mg²⁺-, or Mg²⁺–Ca²⁺-ATPase activities, NaOCl washing resulted in an increase in Mg²⁺–EGTA-ATPase activity of NAM (P < 0.05). The results suggested that washing mince with the appropriate type and concentration of oxidizing agent can improve the gelling ability of surimi, particularly from low quality fish.     

Assessment of the energy and exergy utilization efficiencies in the Turkish agricultural sector

This study deals with evaluating the energy and exergy utilization efficiencies in the Turkish agricultural sector over a 12‐year period from 1990 to 2001. In the energy and exergy analyses, two main energy sources, namely fuels and electricity, are taken into consideration, while the sectoral energy and exergy efficiencies are compared for this period. These main energy sources include diesel for tractors and other vehicles, and electricity for pumps. Overall energy utilization efficiencies are obtained to vary between 29.1 and 41.1%, while overall exergy utilization efficiencies are found to range from 27.9 to 37.4% in the analysed years, respectively. It may be concluded that the present technique proposed here may be used as a useful tool in analysing and evaluating the energy and exergy utilization efficiencies, identifying energy efficiency and/or energy conservation opportunities and dictating the energy strategies of countries. Copyright © 2005 John Wiley & Sons, Ltd.     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry     

热分析在PVA纤维预处理中的应用

用差热、热重法对原丝的热性能及由不同预处理方法所引起的PVA纤维的热行为变化进行了研究;并通过模拟脱水条件,用不同升温速率,求出了经不同预处理纤维的脱水反应活化能。结果表明,PVA原丝在230℃有一软化点,三种预处理都不同程度地影响了原丝的热效应变化;纤维在180～340℃主要为脱水反应;原丝及经脱水剂、O_3和O_3综合脱水剂处理的纤维,其脱水反应的表观活化能分别为:164.3kJ/mol,92.9kJ/mol,130.5kJ/mol和117.6kJ/mol。     

Interconnected power systems with superconducting magnetic energy storage

The objective of this work is to discuss the concept of back‐to‐back interconnection systems with energy storage, especially with a Superconducting Magnetic Energy Storage (SMES) incorporated into a back‐to‐back DC link. In this case, each converter of the back‐to‐back system is used as a power conditioning system for the SMES coils. Since the AC–DC converter can be designed independently of the frequency of the power system, a two‐way switch is connected to the AC side of each converter. This two‐way switch can select the interconnected power systems. By using the two‐way switches, this system can provide the stored energy in the SMES system to each interconnected power system through two AC–DC converters. For instance, lower‐cost power of each power network can be stored through two converters during the off‐peak hours and made available for dispatch to each power network during periods of demand peak. Then this system increases the reliability of electric power networks and enables the economical operations depending on the power demand. This paper describes the unique operations of the back‐to‐back interconnection with SMES and discuses the optimal SMES configuration for a 300‐MW‐class back‐to‐back interconnection. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(2): 37–43, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20482     

液晶分子附着能和盒间隙对响应时间的影响

通过理论分析和实验研究液晶分子附着能和液晶盒间隙对响应时间(τ0)的影响。用液晶盒有效间隙法和表面动力学方程法两种方法推出分析公式,由这两种方法推出的结果是一致的。实验数据与简化方程τ0-dx基本拟合(其中d是液晶盒的间隙,x是指数)。在两种极端的(极大或极小)附着能极限下,指数x分别接近2和1。这个结论有助于优化液晶显示器件的应用。     

Preparation,structural elucidation,molecular weight determination,and molecular recognition of first‐ and second‐tier dendrimer molecules

1,3,5‐Triglyceratetriazine [first tier (G₁)] and tri(1,3,5‐triglycerate) triazine [second tier (G₂)] dendrimers were prepared with 1,3,5‐trichlorotriazine and sodium glycerate in a 1 : 3 mass ratio in an ethanolic medium.G₁ and G₂ were amorphous, white, solid substances. Their structures were elucidated with IR, ¹H‐NMR, and ¹³C‐NMR, and their thermal stability was studied with thermogravimetric analysis. The activation energy was calculated with the Freeman–Carroll model. Densities, viscosities, and surface tensions for 0.01–0.08 mol/kg aqueous solutions increased at 0.01 mol/kg for sodium glycerate, 1,3,5‐trichlorotriazine, 1,3,5‐triazine triglycerate chloride, G₁, and G₂. These values were measured at 298.15 K. The apparent molal volume, reduced viscosity, and inherent viscosity were calculated from the densities and viscosities, respectively. The data were regressed for the limiting densities, limiting apparent molal volumes, intrinsic viscosities, limiting inherent viscosities, and limiting surface tensions for solute–solvent interactions. The positive limiting apparent molal volume values were noted in the order of G₂ > 1,3,5‐triazine triglycerate chloride > G₁ > 1,3,5‐trichlorotriazine > sodium glycerate, with weaker hydrophilic intermolecular interactions of G₂. The higher intrinsic viscosity and limiting inherent viscosity values for G₂ implied stronger G₂–H₂O hydrophilic interactions, and the higher limiting apparent molal volume of G₂ indicated slightly higher dynamic conformational changes in comparison with G₁, with stronger structural activities. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008