新型防水材料的应用和传统防水设计理念的更新

通过近年来对新型防水材料的工程设计和应用实践,以全新的角度对刚性和柔性防水体系的特点进行了分析和研究,提出了以刚性为主,柔性为辅的新防水结构体系设计理念,同时指出了传统防水设计方面存在的一些误区和缺陷。     

激光涂覆技术的实验研究

叙述了有关激光这年来国内外的研究动态;我们采用２ｋＷ横流ＣＯ２激光器在普通低碳钢表面上涂覆镍基自熔合金粉末,初步探讨了有关界面相熔的形成原因、影响因素及解决办法;报激光涂覆过程中各种工艺参数相互关系及对溶敷层稀释度的影响,确定了较合理的工艺参数,该工艺对机械制造业、金属表面硬化等均有实用价值。     

新型廉价CO2激光热处理涂料的研究

报道了一种新型廉价CO2激光热处理涂料,通过对涂料的红外吸收谱、粘合剂种类对涂料红外吸收谱的影响及激光热处理区在处理前后化学成分变化的实验研究,得到了一些有用的结论,经过实际的激光热处理加工应用,证明这种涂料具有吸收率高、价格低廉、无毒、无害、无污染、易清除等优点,完全可以满足激光热处理加工的需要.     

带涂层金属板件缺陷的激光超声检测研究

针对带涂层金属板件的缺陷检测存在分辨率低,形状、尺寸难确定等问题,基于热弹激励原理、依托两套不同的检测系统对带涂层金属板件的缺陷进行检测,展开对激光超声检测技术的方法研究。首先通过实验验证这项技术的可行性和有效性、检验涂层对缺陷检验有无影响,其次利用实验产生的数据以及图像分析了涂层影响下缺陷波形并对缺陷波进行理论分析,然后对波形参数进行了实时计算最终得到了50 μm涂层影响下缺陷的形状和尺寸特征 。研究结果表明:激光超声检测技术可以实现对带涂层机械板件缺陷的定性定量检测,可应用于工程领域的实时在线检测,并有良好的发展前景。     

单晶硅太阳电池纳米减反射膜的研究

报道了用热喷涂工艺制备单晶硅太阳电池纳米减反射膜的研究结果 ,讨论了衬底温度对 Ti Ox 纳米减反射膜结构及折射率的影响 ,优化了热喷涂的工艺条件 ,并研究了 Ti Ox 纳米减反射膜对单体太阳电池效率的贡献。实验证明 ,用热喷涂工艺制备的纳米 Ti Ox 减反射膜可使 1 0 0 mm× 1 0 0 mm单体太阳电池的平均光电转换效率增加 8%～ 9%。     

Optimization of black oxide coating thickness as an adhesion promoter for copper substrate in plastic integrated-circuit packages

Copper-oxide coating applied onto the copper substrate has emerged as an alternative to metallic coatings to improve adhesion with polymeric adhesives and molding compounds. The interfacial-bond strengths between the black oxide-coated Cu substrate and epoxy-based, glob-top resin were measured in button-shear tests, and the failure mechanisms were identified from the fracture-surface examination. The emphasis was to establish the correlation between the coating thickness, the surface roughness, and the interfacial adhesion with respect to treatment time. It was found that at the initial stage of treatment a thin layer of flat, cuprous oxide developed, above which fibrillar-cupric oxide was formed with further treatment until saturation with densified fibrils at about 150 sec. The interfacial-bond strength between the oxide-coated copper substrate and glob-top resin increased gradually with increasing treatment time, until the bond strength reached a plateau constant after a treatment for about 150 sec. There was a functional similarity between the oxide thickness, the surface roughness, and the interface-bond strength with respect to treatment time. A treatment time of 150 sec is considered an optimal condition that can impart the highest interface adhesion.     

激光合金化Si3N4/石墨复合涂层及其摩擦学性能研究

在 4 5钢表面激光合金化Si3 N4/石墨复合涂层 ,对合金化层的微观组织结构、显微硬度、元素含量和分布、摩擦磨损性能等进行了分析和实验研究 ,并据此对预涂层材料组成、配比和激光合金化工艺参数进行了优化。结果表明 :激光合金化Si3 N4/石墨复合材料能够获得组织均匀细密、硬度显著提高的合金化层。并且在干摩擦条件下 ,减小了金属表面的摩擦系数 ,提高了耐磨性和抗粘着的能力 ,整个摩擦过程也很稳定     

化学复合镀层激光处理研究

研究了激光处理对Ni-P -SiC化学复合镀层的影响。借助于扫描电镜、能谱仪、X射线衍射、显微硬度计等设备对激光处理后复合镀层的表面形貌、组织结构及性能进行了综合分析。结果表明 ,对复合镀层进行激光处理可以获得与炉内加热同样的镀层硬度 ,且当激光功率 4 0 0W ,扫描速度 1.5m /min时 ,镀层硬度高于炉内加热的硬度     

ZnO单晶薄膜光电响应特性

对采用MOCVD方法沉积的ZnO单晶薄膜的欧姆接触特性、光电特性进行了研究,并对比研究了射频溅射沉积SiO2抗反射膜对ZnO薄膜I-V、光电特性的影响.实验结果表明,非合金Al/ZnO金属体系与n型ZnO形成了良好的欧姆接触,溅射沉积SiO2在ZnO表面引入了载流子陷阱,影响I-V特性,延长了光响应下降时间.ZnO单晶薄膜光电导也具有时间退化现象.     

In Situ Synthesis of Titanium Nickel Intermetallic Compounds Layer and TiN Coating By Laser Cladding

1 Introduction Laser cladding technology has been widely used in ma- terial processing and tool repairing because it causes little distortion and leads to high quality coatings [1]. Since the appearance ofhigh power diode lasers, the laser cladding is more efficient, economical and flexible[2￣5]. Titanium nickel alloys have excellent properties such as low density, high strength, and high chemical stability, which have promoted their applications in the aerospace, chemical, petrochemical and …