脱硫废水旋转喷雾蒸发特性实验研究

脱硫废水旋转喷雾干燥技术是一种利用热烟气蒸发脱硫废水的零排放技术。开展了不同悬浮物（SS）含量的脱硫废水原水以及经浓缩的高盐废水的蒸发实验,采用可视化手段观察了脱硫废水在干燥塔内的蒸发特性,考察了脱硫废水喷雾蒸发过程中停留时间、进口烟气温度、气液比对蒸发特性的影响。结果表明,旋转喷雾蒸发工艺对高盐、高SS含量等复杂脱硫废水组分具有较佳的适应性;脱硫废水从旋转雾化器喷出后迅速蒸发,主蒸发区在雾化盘下方0.75~1.00 m区域内;随后是蒸发析出的未干盐分及未完全蒸发的废水液滴进一步蒸干至含水率低于2 %;烟气在喷雾干燥塔内的停留时间需要维持在20 s以上才能保证塔出口灰分含水率低于2 %;入口烟气温度越高,其塔底及塔出口的灰分含水率越低,在气液比为12 000 m³/m³（标准状态）的废水工况下,入口烟温为280 ℃时已经难以保证废水液滴良好蒸发;在入口烟气温度为340 ℃、气液比大于10 000 m³/m³（标准状态）时,塔底灰分含水率小于2%,蒸发效果良好。     

Micron-Scale Soft Actuators Fabricated from Multi-Shell Polystyrene Particle-Gold Nanoparticle Nanohybrids

Actuators made of soft matter are needed for a variety of fields ranging from biomedical devices to soft robotics to microelectromechanical systems. While there are a variety of excellent methods of soft actuation known, the field is still an area of intense research activity as new niches and needs emerge with new technology development. Here, a soft actuation system is described, based on a core-multi-shell particle, which moves via photothermal expansion. The system consists of a novel polystyrene-based thermally expandable microsphere, with a secondary shell of a silicate-silane graft copolymer, to which gold nanoparticles are covalently linked. The gold nanoparticles act as photothermal nano-transducers, converting light energy into the thermal energy necessary for microsphere expansion, which in turn results in material movement. Actuation is shown in isolated particles in thermal and photothermal regimes using metal ceramic heaters or 520 nm laser illumination, respectively. Macroscale actuation is demonstrated by making a composite material of particles suspended in the transparent elastomer polydimethylsiloxane. The sample demonstrates an inchworm-like movement by starting from an arched geometry. Overall, this work describes a new particle-based actuation method for soft materials, and demonstrates its utility in driving the movement of a composite elastomer.     

Conductivity enhancement in transparetn ZnO films via Al-dopping produced by CW-CO2 laser-induced evaporation

Highly conductive transparent aluminium-doped ZnO (ZnO:A1) films were successfully deposited by CW-CO₂ laser-induced evaporation. Optimisation of evaporation parameters was based on laser power, substrate temperature, O₂ partial pressure in the vacuum chamber and amount of Al in the ZnO source pellet. ZnO:A1 films with an electrical resistivity as low as 6.6 × 10⁻²Ω·cm and an optical transmission of 80% at 500nm were obtained at laser power of 15 W, substrate temperature of about 200°C, O₂ partial pressure of 6—7 × 10⁻⁴ Torr and 5wt.% Al. Conductivity of ZnO films can be increased one order via Al-doping in ZnO films. The films obtained by laser-induced evaporation have compared quite favorably with the high quality films obtained by sputtering.     

气相色谱法测定有机化合物的蒸发热

本文用气相色谱测定了多种烷烃、芳烃、醇类和酯类的蒸发热。结果表明,测定数据与文献数据基本一致,误差一般在±5%以内。是一种简单、快捷的测定方法。     

降低蒸发系统中结盐的措施

分析了液碱蒸发装置结盐对蒸发传热系数、生产能力和蒸汽消耗的影响。通过减少盐进入量，降低蒸发装置结盐速率和优化操作来解决蒸发系统的结盐问题，达到了降低汽耗、提高效能的目的。     

Preparation of Protein-Stabilized β-Carotene Nanodispersions by Emulsification–Evaporation Method

This work was initiated to prepare protein-stabilized β-carotene nanodispersions using emulsification–evaporation. A pre-mix of the aqueous phase composed of a protein and hexane containing β-carotene was subjected to high-pressure homogenization using a microfluidizer. Hexane in the resulting emulsion was evaporated under reduced pressures, causing crystallization and precipitation of β-carotene inside the droplets and formation of β-carotene nanoparticles. Sodium caseinate (SC) was the most effective emulsifier among selected proteins in preparing the nanodispersion, with a monomodal β-carotene particle-size distribution and a 17-nm mean particle size. The results were confirmed by transmission-electron microscopy analysis. SC-stabilized nanodispersion also had considerably high ζ-potential (−27 mV at pH 7), suggesting that the nanodispersion was stable against particle aggregation. Increasing the SC concentration decreased the mean particle size and improved the polydispersity of the nanodispersions. Nanodispersions prepared with higher β-carotene concentrations and higher organic-phase ratios resulted in larger β-carotene particles. Although increased microfluidization pressure did not decrease particle size, it did improve the polydispersity of the nanodispersions. Repeating the microfluidization process at 140 MPa caused the nanodispersions to become polydisperse, indicating the loss of emulsifying capacity of SC due to protein denaturation.     

Heat-release mechanism in ammonium dinitramide flame

To verify the adequacy of various models of heat release in ammonium dinitramide flame to real processes, chemical processes in products of thermal decomposition at a pressure of 10 torr and in ammonium dinitramide [ADN; NH₄N(NO₂)₂] flame at a pressure of 0.4 to 60 atm are numerically simulated. The calculations are performed on the basis of a detailed kinetic mechanism and boundary conditions correlated with experimental data, thermodynamic properties, and chemical composition of ADN. The kinetic mechanism includes submechanisms that describe high-temperature chemical processes in NH₃/N₂O/NO/NO₂/HNO₂/HNO₃ and NH₃/HN(NO₂)₂ mixtures, and the global stages of aerosol decomposition. Based on calculated and experimental data, the role of dinitraminic acid HN(NO₂)₂, aerosols, and ADN vapor in heat release in the ADN flame zone adjacent to the burning surface is estimated. The calculations predict that the main source of heat release in the cold flame zone at p ≥ 3 atm is dinitraminic acid incoming through the channel of dissociative evaporation ADN_liq → NH₃ + HN(NO₂)₂ from the burning surface. In the high-temperature flame zone, heat release is caused by the reaction that occurs in the NH₃/N₂O/NO/NO₂/HNO₂/HNO₃ mixture. At moderate pressures, the high-temperature and low-temperature zones are separated by an induction zone. The stage governing production of the OH radical, which plays an important role in combustion, in the induction zone is the reaction HNO₃ + M → OH + NO₂ + M. Because of a high activation energy of the stage, small temperature perturbations in the induction zone at low pressures lead to a finite change in the stand-off distance between the high-temperature flame zone and the burning surface. Therefore, small temperature perturbations in the induction zone, which are caused by admixtures in the sample or by heat transfer between the reacting gas and the ambient medium, may be responsible for disagreement between various experimental data and between experimental and calculated data on the stand-off distance between the high-temperature flame zone and the burning surface. In numerical calculations, the position of the high-temperature zone is effectively controlled by varying rate constants of elementary stages within admissible limits. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 5, pp. 64–76, September–October, 2007.     

Chemical and Isotopic Tracer Evaluation of Water Mixing and Evaporation in a Dammed Texas River During Drought

The interaction between drought and river regulation is monitored to better understand river flow mixing, evaporation and surface‐groundwater exchange in changing regional climates and in increasingly regulated waterways. This study compared Brazos River stable isotope (δ¹⁸O and δD) and electrical conductivity values with reservoir, creek and aquifer samples in the Brazos watershed, the largest watershed in Texas. The combination of tributaries, rainfall and the Brazos River Alluvium Aquifer, on the one hand, and the Lake Whitney reservoir, on the other hand, represent endmembers of dilute run‐off water and evaporated saline water, respectively. A simple isotope mixing model that uses monthly river discharge, Lake Whitney discharge, historical monthly precipitation δ¹⁸O and pan evaporation accurately reconstructs river δ¹⁸O (±0.5‰ on average). Data and isotope balance modelling support continued evaporation of ¹⁸O‐enriched Lake Whitney water as it flows downstream, although the most evaporation took place in Lake Whitney. The difference between river and precipitation δ¹⁸O, or Δ¹⁸O_RIV‐_PPT, here a measurement of degree of evaporation, ranged from ?0.1‰ for a small creek, to 1.7‰ for the Brazos River, to at least 2.7‰ in Lake Whitney. This study indicates that drought in regulated rivers may enhance reservoir discharge dominance in river flows during peak drought conditions when combined run‐off and baseflow dominance would be expected in a similar undammed river. Copyright © 2016 John Wiley & Sons, Ltd.     

蒸发二段真空度不稳定原因分析

对斯那姆尿素工艺二段蒸发真空度不稳定原因进行了较详细的分析，并提出相应的操作处理措施     

烧碱蒸发过程自动化控制原理

详细介绍了烧碱蒸发自动控制模型尤其是浓度数学模型建立的原理和具体方法，并指出了在实际运行中应注意的问题，使出料质量分数能平稳地控制在30.0%-30.5%之间。根据现有的浓碱冷却流程，制定了科学合理的浓碱冷却和冷却系统冲洗控制方案。