85℃3000小时系列焊片式铝电解电容器的开发研究

该次试验的目的是为了开发出85℃3000小时这种新的系列的焊片式铝电解电容器。为此,对该系列选取了最小电压200V的小容量和大容量,及最大电压450V的小容量和大容量的产品分别进行了设计和开发。开发过程中对阳极箔,阴极箔,电解纸,电解液等原材料进行了分析比较,并将四种设计分别做成产品并测试最薄弱的环节85℃3000小时的纹波电流试验,结果表明该系列的设计能很好地满足电性能要求。     

High‐Power Lithium Metal Batteries Enabled by High‐Concentration Acetonitrile‐Based Electrolytes with Vinylene Carbonate Additive

To enable next‐generation high‐power, high‐energy‐density lithium (Li) metal batteries (LMBs), an electrolyte possessing both high Li Coulombic efficiency (CE) at a high rate and good anodic stability on cathodes is critical. Acetonitrile (AN) is a well‐known organic solvent for high anodic stability and high ionic conductivity, yet its application in LMBs is limited due to its poor compatibility with Li metal anodes even at high salt concentration conditions. Here, a highly concentrated AN‐based electrolyte is developed with a vinylene carbonate (VC) additive to suppress Li⁺ depletion at high current densities. Addition of VC to the AN‐based electrolyte leads to the formation of a polycarbonate‐based solid electrolyte interphase, which minimizes Li corrosion and leads to a very high Li CE of up to 99.2% at a current density of 0.2 mA cm^‐2. Using such an electrolyte, fast charging of Li||NMC333 cells is realized at a high current density of 3.6 mA cm^‐2, and stable cycling of Li||NMC622 cells with a high cathode loading of 4 mAh cm^‐2 is also demonstrated.     

Temperature‐Mediated Engineering of Graphdiyne Framework Enabling High‐Performance Potassium Storage

Graphdiyne (GDY), an emerging type of carbon allotropes, possesses fascinating electrical, chemical, and mechanical properties to readily spark energy applications in the realm of Li‐ion and Na‐ion batteries. Nevertheless, rational design of GDY architectures targeting advanced K‐ion storage has rarely been reported to date. Herein, the first example of synthesizing GDY frameworks in a scalable fashion to realize superb potassium storage for high‐performance K‐ion battery (KIB) anodes is showcased. To begin with, first principles calculations provide theoretical guidances for analyzing the intrinsic potassium storage capability of GDY. Meanwhile, the specific capacity is predicted to be as high as 620 mAh g^?1, which is considerably augmented as compared with graphite (278 mAh g^?1). Experimental tests then reveal that prepared GDY framework indeed harvests excellent electrochemical performance as a KIB anode, achieving high specific capacity (≈505 mAh g^?1 at 50 mA g^?1), outstanding rate performance (150 mAh g^?1 at 5000 mA g^?1) and favorable cycling stability (a high capacity retention of over 90% after 2000 cycles at 1000 mA g^?1). Furthermore, kinetic analysis reveals that capacitive effect mainly accounts for the K‐ion storage, with operando Raman spectroscopy/ex situ X‐ray photoelectron spectroscopy identifying good electrochemical reversibility of GDY.     

A New Strategy to Effectively Suppress the Initial Capacity Fading of Iron Oxides by Reacting with LiBH4

In this work, a new facile and scalable strategy to effectively suppress the initial capacity fading of iron oxides is demonstrated by reacting with lithium borohydride (LiBH₄) to form a B‐containing nanocomposite. Multielement, multiphase B‐containing iron oxide nanocomposites are successfully prepared by ball‐milling Fe₂O₃ with LiBH₄, followed by a thermochemical reaction at 25–350 °C. The resulting products exhibit a remarkably superior electrochemical performance as anode materials for Li‐ion batteries (LIBs), including a high reversible capacity, good rate capability, and long cycling durability. When cycling is conducted at 100 mA g^?1, the sample prepared from Fe₂O₃–0.2LiBH₄ delivers an initial discharge capacity of 1387 mAh g^?1. After 200 cycles, the reversible capacity remains at 1148 mAh g^?1, which is significantly higher than that of pristine Fe₂O₃ (525 mAh g^?1) and Fe₃O₄ (552 mAh g^?1). At 2000 mA g^?1, a reversible capacity as high as 660 mAh g^?1 is obtained for the B‐containing nanocomposite. The remarkably improved electrochemical lithium storage performance can mainly be attributed to the enhanced surface reactivity, increased Li⁺ ion diffusivity, stabilized solid‐electrolyte interphase (SEI) film, and depressed particle pulverization and fracture, as measured by a series of compositional, structural, and electrochemical techniques.     

General Synthesis of Dual Carbon‐Confined Metal Sulfides Quantum Dots Toward High‐Performance Anodes for Sodium‐Ion Batteries

Sponge‐like composites assembled by cobalt sulfides quantum dots (Co₉S₈ QD), mesoporous hollow carbon polyhedral (HCP) matrix, and a reduced graphene oxide (rGO) wrapping sheets are synthesized by a simultaneous thermal reduction, carbonization, and sulfidation of zeolitic imidazolate frameworks@GO precursors. Specifically, Co₉S₈ QD with size less than 4 nm are homogenously embedded within HCP matrix, which is encapsulated in macroporous rGO, thereby leading to the double carbon‐confined hierarchical composites with strong coupling effect. Experimental data combined with density functional theory calculations reveal that the presence of coupled rGO not only prevents the aggregation and excessive growth of particles, but also expands the lattice parameters of Co₉S₈ crystals, enhancing the reactivity for sodium storage. Benefiting from the hierarchical porosity, conductive network, structural integrity, and a synergistic effect of the components, the sponge‐like composites used as binder‐free anodes manifest outstanding sodium‐storage performance in terms of excellent stable capacity (628 mAh g^?1 after 500 cycles at 300 mA g^?1) and exceptional rate capability (529, 448, and 330 mAh g^?1 at 1600, 3200, and 6400 mA g^?1). More importantly, the synthetic method is very versatile and can be easily extended to fabricate other transition‐metal‐sulfides‐based sponge‐like composites with excellent electrochemical performances.     

一种奇特型阴极的分析研究与改进

本文主要叙述对Jc-300磁控管奇特型阴极的分析研究、改进过程及其投入生产使用的效果     

一种具有高正向阻断电压及优良开关特性的新型静电感应晶闸管

设计并构造了一种具有条状阳极P-缓冲层结构（SAP-B）的新型静电感应晶闸管。该结构以具有p- 缓冲层和嵌入p+发射区（条状阳极区）的弱掺杂n-发射区（泄漏阳极区）为特点。与传统扩散源区埋栅结构相比,SAP-B结构可进一步简化工艺,并将扩散源区埋栅结构静电感应晶闸管的正向阻断电压从1000V提高至1600V,阻断增益从40提高至70,同时将关断时间从0.8μs降低至0.4μs。     

A new cleaning process combining non-ionic surfactant with diamond film electrochemical oxidation for polished silicon wafers

This paper presents a new cleaning process for particle and organic contaminants on polished silicon wafer surfaces.It combines a non-ionic surfactant with boron-doped diamond(BDD) film anode electrochemical oxidation. The non-ionic surfactant is used to remove particles on the polished wafer's surface,because it can form a protective film on the surface,which makes particles easy to remove.The effects of particle removal comparative experiments were observed by metallographic microscopy,which showed tha...     

Understanding Origin of Voltage Hysteresis in Conversion Reaction for Na Rechargeable Batteries: The Case of Cobalt Oxides

Conversion reaction electrodes offer a high specific capacity in rechargeable batteries by utilizing wider valence states of transition metals than conventional intercalation‐based electrodes and have thus been intensively studied in recent years as potential electrode materials for high‐energy‐density rechargeable batteries. However, several issues related to conversion reactions remain poorly understood, including the polarization or hysteresis during charge/discharge processes. Herein, Co₃O₄ in Na cells is taken as an example to understand the aforementioned properties. The large hysteresis in charge/discharge profiles is revealed to be due to different electrochemical reaction paths associated with respective charge and discharge processes, which is attributed to the mobility gap among inter‐diffusing species in a metal oxide compound during de/sodiation. Furthermore, a Co₃O₄–graphene nanoplatelet hybrid material is demonstrated to be a promising anode for Na rechargeable batteries, delivering a capacity of 756 mAh g^?1 with a good reversibility and an energy density of 96 Wh kg^?1 (based on the total electrode weight) when combined with a recently reported Na₄Fe₃(PO₄)₂(P₂O₇) cathode.     

具有核壳结构的锂离子电池用Sn/C复合负极材料研究

采用碳热还原法以及沥青裂解包覆技术,制备具有核壳结构的Sn/C复合负极材料,对采用改性天然石墨与人造石墨作为内核的效果作了比较,并分析研究壳层的厚度对材料综合性能的影响.结果表明,采用改性天然石墨作为内核能更有效分散Sn金属颗粒,另外沥青裂解碳包覆层的厚度对材料的循环稳定性具有较大的影响.以改性天然石墨为内核,具有(10％+20％)双层包覆结构的负极样品具有最佳的综合性能,首次库伦效率为76.3％,54周的容量保持率为99％.材料结构的设计以及结构的合成工艺是解决锡基合金负极材料体积效应的重要途径.