Synthesis and microwave characterization of Co-SiC core-shell powders by electroless plating

Co-SiC core-shell powders were prepared by electroless plating. Scanning electron microscopy （SEM） revealed that Co-SiC core-shell powders were of nearly sphere-like shape and were about 0.3 pan. X-ray powder diffraction （XRD） patterns showed that the cobalt powder was hexagonal crystallite. The complex dielectric constant and the complex permeability of Co-SiC core-shell powders-paraffin wax composite were measured by the rectangle wavegnide method. It showed that the dielectric loss was less than 0.1 and the magnetic loss was about 0.2 in 8.2-12.4 GHz for prepared Co-SiC core-shell comoosite oowders.     

铍材应力常数的X射线法测试

在X2001应力分析仪上采用悬臂梁加载法测试了可以用于铍的X射线应力测试的5个衍射晶面的应力常数。结果表明,铍的5个衍射晶面的应力常数差异较大，在进行X射线应力分析时．应采用相应衍射晶面的应力常数，才能获得准确的应力分析结果。由于X射线对铍有较大的穿透深度，必须考虑X射线穿透深度对应力常数标定的影响。     

大型软包锂离子电池的热物性实验研究

针对大型软包锂离子电池热物性参数的测定问题,提出适用于该型电池的热参数表征方法. 基于准稳态导热原理,建立电池的传热理论模型. 开展实验研究电池的比定压热容和导热系数与温度的依变关系,分析热损对测试结果的影响,对测试方法的有效性进行验证. 结果表明,电池比定压热容随着温度的升高而线性增大,导热系数受温度的影响较小. 在900 s内可以测得电池热参数在10~60 °C下的变化状况,实验验证结果显示测算精度高于92.3%,具有测算周期短、准确度高和测试灵活等优势.     

某1000 MW汽轮机组励磁系统实测建模过程浅析

该机组是上海汽轮发电机有限公司生产的1000 MW汽轮机组,励磁调节器是ABB公司生产的UNITROL-6800型数字励磁调节器。文章论述了该机组励磁系统参数测试结果,给出了电力系统稳定计算用励磁系统的模型和参数。     

弧焊电源的焊接电流、负载持续率和发热试验

详细分析了弧焊电源不同负载持续率下的焊接电流折算关系、发热试验电源热时间常数的测定。对发热试验中容易被忽视、但会造成较大的系统误差的问题提出了注意点和相应的解决办法。     

不同变截面桩竖向承载特性的数值分析

基于现场试验,采用Abaqus有限元软件对等截面桩及变截面桩单桩竖向承载力测试实验过程进行数值模拟。结果表明:弹性变形阶段,竖向荷载-沉降曲线呈线性变化趋势,等截面桩比变截面桩桩身沉降较小;塑性屈服阶段,等截面桩与变截面桩单桩承载力几乎一致。变截面位置对桩侧摩阻力沿深度的分布有一定影响,最大侧摩阻力位置根据变截面的位置而变化。变截面桩的平均侧摩阻力较等截面桩的平均侧摩阻力大,变截面桩侧摩阻力效果较等截面桩更有优势。在相同承载力条件下,变截面桩所耗费的材料较等截面少,对于竖向承载特性,变截面桩与等截面桩表现基本一致,因此使用变截面桩能节约工程成本。     

丁腈橡胶硫化反应动力学研究

设计了促进剂A 4种不同用量的丁腈橡胶配方;基于配方,先利用密炼机将丁腈橡胶、硬脂酸和ZnO混炼,再利用开炼机加入硫黄、促进剂和防老剂,再利用无转子硫化仪分别测试了160℃、170℃和180℃下胶料硫化曲线;基于硫化曲线计算出了每组配方胶料硫化反应速率常数K和活化能Ea。结果表明,在焦烧期时,NBR硫化反应为非一级反应,真正的一级反应开始于硫化速率达到最大时,即tdis;焦烧期后的反应可分为2个阶段且遵循一级动力学反应规律。     

3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview

Recently, polyvinylidene fluoride (PVDF) based nanocomposites have attracted much attention for next-generation wearable applications such as promising piezoelectric energy harvesters (nanogenerators), energy storage devices, sensing devices, and biomedical devices due to their high flexibility, and high dielectric and piezoelectric properties. 3D printing technology, PVDF based piezoelectric nanocomposites, the studies based on 3D printing of PVDF based piezoelectric nanocomposites by inkjet printing and fused deposition modeling, and enhancements of energy harvesting and storage performance of nanocomposites by structural design are comprehensively overviewed here. An insight is provided into 3D printing techniques, structure and properties of PVDF based polymers, various nanofillers and production methods for nanocomposites, solutions to enhance β phase (crystallinity) of PVDF, and improvements of nanocomposites’ breakdown strength, discharged energy density, and piezoelectric power output by mentoring structural design.     

Synergistic Effect of PVDF-Coated PCL-TCP Scaffolds and Pulsed Electromagnetic Field on Osteogenesis

Bone exhibits piezoelectric properties. Thus, electrical stimulations such as pulsed electromagnetic fields (PEMFs) and stimuli-responsive piezoelectric properties of scaffolds have been investigated separately to evaluate their efficacy in supporting osteogenesis. However, current understanding of cells responding under the combined influence of PEMF and piezoelectric properties in scaffolds is still lacking. Therefore, in this study, we fabricated piezoelectric scaffolds by functionalization of polycaprolactone-tricalcium phosphate (PCL-TCP) films with a polyvinylidene fluoride (PVDF) coating that is self-polarized by a modified breath-figure technique. The osteoinductive properties of these PVDF-coated PCL-TCP films on MC3T3-E1 cells were studied under the stimulation of PEMF. Piezoelectric and ferroelectric characterization demonstrated that scaffolds with piezoelectric coefficient d₃₃ = −1.2 pC/N were obtained at a powder dissolution temperature of 100 °C and coating relative humidity (RH) of 56%. DNA quantification showed that cell proliferation was significantly enhanced by PEMF as low as 0.6 mT and 50 Hz. Hydroxyapatite staining showed that cell mineralization was significantly enhanced by incorporation of PVDF coating. Gene expression study showed that the combination of PEMF and PVDF coating promoted late osteogenic gene expression marker most significantly. Collectively, our results suggest that the synergistic effects of PEMF and piezoelectric scaffolds on osteogenesis provide a promising alternative strategy for electrically augmented osteoinduction. The piezoelectric response of PVDF by PEMF, which could provide mechanical strain, is particularly interesting as it could deliver local mechanical stimulation to osteogenic cells using PEMF.     

等速升温流态化下CaO/生物质焦的SO2/NO联合脱除特性

燃煤锅炉污染物超低排放标准对电厂脱硫和脱硝系统提出了更高的要求。CaO作为脱硫剂可以实现循环流化床锅炉烟气中SO₂的高效脱除,焦炭作为还原剂直接还原NO,同时CaO的存在对焦炭还原NO起催化作用,可以实现燃煤烟气中SO₂/NO的联合脱除。为了探究连续温度变化对CaO/生物质焦联合脱硫脱硝性能的影响,在钙循环捕集CO₂技术背景下,研究了等速升温流态化下CaO/生物质焦的SO₂/NO联合脱除特性。探究了烟气中O₂和CO₂对CaO/椰壳焦脱除SO₂/NO的影响。结果表明,O₂通过对椰壳焦表面碳原子的活化作用降低了异相还原NO温度,在300~950℃等速升温过程中CaO/椰壳焦的NO脱除效率逐渐增加,780℃以上能实现100%脱硝。O₂也提高了CaO/椰壳焦的脱硫效率。CO₂与CaO的碳酸化反应以及与椰壳焦的气化反应对同时脱除SO₂/NO有明显抑制作用。O₂和CO₂共同作用下,在500~800℃内CaO/椰壳焦的脱硝效率随温度升高而增加,脱硫效率先降低后升高。NO促进了CaO/椰壳焦脱除SO₂,而SO₂对脱硝有抑制作用。800℃时CaO/椰壳焦同时脱除SO₂和NO的效率分别为97.7%和93.9%。