Buckling analysis for delaminated composites using plate bending elements based on higher‐order zig‐zag theory

A finite element based on the efficient higher‐order zig‐zag theory with multiple delaminations is developed. The bending part of the formulation is constructed from the concept of DKQ element. Unlike conventional elements, a developed element has its reference in the bottom surface which simplifies zig‐zag terms on formulation. Exact patch solutions are developed on elements which have the bottom reference system. The present element passes proper bending patch tests in the arbitrary mesh configurations in isotropic materials. Zig‐zag formulation is adopted to model laminated plates with multiple delaminations. To assess the accuracy and efficiency of the present element based on higher‐order zig‐zag theory with multiple delaminations, the linear buckling problem of laminated plates with multiple delaminations has been analysed. The results have been compared with three‐dimensional elasticity solutions. The present element works as an efficient tool for analysing the behaviour of the laminated composites with multiple delaminations. Copyright © 2002 John Wiley & Sons, Ltd.     

Pb（Sc1／2Ta1／2）O3铁电体的有序结构和介电性质）

通过铌铁矿预合成法制备Ｐｂ（Ｓｃ１／２Ｔａ１／２）Ｏ３（ＰＳＴ）陶瓷，经适当的热处理获得了钙钛矿化合物Ｂ位离子的高有序和高无序试样，ＰＳＴ陶瓷的介电性质研究结果表明，高有序试样（Ｓ＝０．７７）的居里温度为２９℃，并具有较低的介电常数表现出普通铁电体性质特征，而高元序试样（Ｓ＝０）具有很高的介电常数，并表现出明显的弥散性相转变和Ｔｍ的频率色散行为，即高介电常数的驰豫铁电体性质。文中还利用ＸＲＤ，ＳＥ     

高层钢-钢骨混凝土混合结构的设计研究

结合一幢高层钢 钢骨混凝土混合结构的设计 ,着重介绍了在罕遇地震作用下采用层模型和空间模型的弹塑性分析计算结果、钢骨混凝土柱与钢梁的计算、节点设计及相应的构造措施 ,供结构工程师参考。     

工艺空气压缩机组开车过程的思考

通过汽轮机组调速系统伺服马达不复位、主汽门不动作，反推出电磁阀控制线路接线错误，用人为短路压力开关等手段判断出组合油脱扣器活塞卡涩是造成现场延误开车的根本原因，提出完善大机组开车工作票制度、提高人员素质等措施。     

Analysis of crack tip plasticity for microstructurally small cracks using crystal plasticity theory

Crack tip plastic zone sizes and crack tip opening displacements (CTOD) for stationary microstructurally small cracks are calculated using the finite element method. To simulate the plastic deformation occurring at the crack tip, a two-dimensional small strain constitutive relationship from single crystal plasticity theory is implemented in the finite element code ANSYS as a user-defined plasticity subroutine. Small cracks are modeled in both single grains and multiple grains, and different crystallographic conditions are considered. The computed plastic zone sizes and CTOD are compared with those found using conventional isotropic plasticity theory, and significant differences are observed.     

Homogeneous Plastic Flow of Fully Amorphous and Partially Crystallized Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5) Bulk Metallic Glass

The homogeneous plastic flow of fully amorphous and partially crystallized Zr(41.2)Ti(13.8)Cu(12.5)Ni(10)Be(22.5) bulk metallic glass (Vitl) has been investigated by compression tests at high temperatures in supercooled liquid region. Experimental results show that at sufficiently low strain rates, the supercooled liquid of the fully amorphous alloy reveals Newtonian flow with a linear relationship between the flow stress and strain rate. As the strain rate is increased, a transition from linear Newtonian to nonlinear flow is detected, which can be explained by the transition state theory. Over the entire strain rate interval investigated, however, only nonlinear flow is present in the partially crystallized alloy, and the flow stress for each strain rate is much higher. It is found that the strain rate-stress relationship for the partially crystaltized alloy at the given temperature of 646 K also obeys the sinh law derived from the transition state theory, similar to that of the initial homogeneous amo     

锇(Ⅷ)-N-(8-喹啉基)-N’-苯甲酰基硫脲(QBTU)络合物吸附波的1.5次微分极谱研究

于0.025mol/LNaOH溶液中,Os(Ⅷ)-QBTU体系产生—明晰的极谱波,其1.5次微分峰电流与浓度在1.0×10~(-7)～4.0×10~(-5)mol/L范围内呈线性关系。研究了极谱电流的性质、反应机理及电极过程等后确认:络合物的组成为[OsO_4(OH)_2·QBTU]·Na_2并吸附于滴汞电极表面,配体QBTU在不离解出的情况下发生电还原,获得络合物吸附波,电极过程不可逆,[OsO_4(OH)_2·QBTU]~(2-)离子的条件稳定常数8.5×10~5。     

Diffusion in metallic glasses

Rutherfordα-particles backscattering technique was employed for measurements of diffusion rates in metallic glasses. Effects of relaxation, crystallization and plastic deformation on diffusion rates were also investigated. It has been observed that the diffusion rates of a metallic solute are of the same orders of magnitude in both metal-metal and metal-metalloid glasses. A higher diffusivity is likely if there is a large difference between melting points of the solute and matrix. Relaxation has no effect on diffusion, however, diffusivity increases on crystallization. An increase in diffusivity is also observed on plastic deformation of metallic glass.     

Filler-induced failure mechanism in plastic-encapsulated microelectronic packages

Based on empirical data, the present work provides a model to prevent filler-induced reliability degradation in plastic-encapsulated LOC (lead-on-chip) packages. According to the model, the maximum size of the silica fillers included in the plastic package body should be smaller than one half of the inter-distance between the device and its overlying lead-frame. In particular, it is shown in the model that the spherical silica particles, which are sometimes trapped in the space between the top surface of the device and the bottom of the lead-frame during the encapsulating process, can induce huge compressive stress on a specific site of the integrated circuit pattern due to the thermal shrinkage of the plastic package body. Further, the present model suggests that tiny fillers squeezed beneath a large trapping filler might directly attack the brittle layer of the device pattern because the compressive force from the large filler particle can develop into huge compressive stress due to the reduced load-carrying area.     

三体磨料塑变磨损中磨粒运动方式的研究

对三体磨料磨损中磨粒的运动方式做了进一步的理论分析，基于三体磨料磨损中塑变疲劳磨损起主要作用，为突出塑变疲劳磨损的作用，选择圆形磨料进行研究，分析了圆整磨料在三体磨料磨损界面中滚动、滑动的判定，提出了相对滑动界面的判定。