Methacrylic acid–acrylamide-g-poly(ethyleneterephthalate) fibres for urea hydrolysis

This paper presents the results of urease immobilization onto methacrylic acid–acrylamide grafted poly(ethyleneterephthalate) fibres. The graft yield strongly affected the maximum activity of the immobilized enzyme up to a value of 70·2%. Higher grafting caused a decline in urease activity and led to the degradation of the fibres. The minor changes observed in K_m and V_max demonstrated that the conformational changes existed during immobilization were not extensive. However, 70·2% methacrylic acid–acrylamide-g-fibres containing urease were more stable towards acidic and alkaline pH, high temperature and storage conditions compared with free enzyme. Apart from the increase in stability to heat inactivation, the initial enzymatic activity of the urease–fibre system remained almost unchanged even after 40 repeated assays corresponding to 10 h of operation in 4 months, indicating the excellent durability of the system.     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.     

Anaerobic digestion of alkaline black liquor using an up-flow anaerobic sludge blanket reactor

The anaerobic digestion of alkaline black liquor from a cereal straw pulping mill was studied in batch (serum bottles) and continuous systems (up-flow anaerobic sludge blanket reactor—UASB). The batch digestion studies confirmed that lignin and related compounds (LRC) in the alkaline black liquor were the main inhibitory substances and could not be decomposed by anaerobic bacteria. At organic loading rates of 5–10 kg COD m^?3 day^?1, the UASB reactor achieved 50–60% COD removal efficiencies. Gas production was 2–3 dm³ per dm³ of alkaline black liquor. Two different sludge types were examined in the reactor: granular and cluster-like sludges. Sludge in a cluster, which involved many small granules and flocs, tended to form larger aggregates and possessed good settling ability.     

The Synthesis of Covalent Triazine-Based Frameworks via Friedel–Crafts Reactions of Cyanuric Chloride with Thienyl and Carbazolyl Derivatives for Fluorescence Sensing to Picric Acid,Iodine and Capturing Iodine

A multifunctional thiophene-based covalent triazine framework (TTPATTh) with triphenylamine as core is synthesized by Friedel–Crafts reaction of cyanuric chloride with thienyl derivative for the first time. The yield of TTPATTh (99.59%) is far higher than that of the carbazole-based CTF (TTPATCz, 47.03%). TTPATTh and TTPATCz possess high BET surface areas with 1235 and 2501 m² g^–1 as well as high pore volumes with 1.60 and 2.23 cm³ g^–1, respectively. TTPATTh and TTPATCz have high thermal stability with high thermal decomposition temperatures of 514 and 598 °C in nitrogen atmosphere. With the introduction of triazine rings, the fluorescence sensing sensitivities of TTPATTh and TTPATCz to picric acid and iodine are improved significantly. Especially for TTPATTh, the K_sv values reach 5.95 × 10⁵ and 1.61 × 10⁴ L mol^–1, and LODs reach 1.02 × 10^–12 and 1.86 × 10^–12 mol L^–1. To the best of the knowledge, this is the most sensitive value among thiophene-based porous organic polymers to PA and I₂. Furthermore, TTPATTh and TTPATCz can also adsorb iodine in vapor phase, cyclohexane solution and aqueous solution, and release iodine by heating or in ethanol solution. The efficiency of controlling the release of iodine is higher than that in ethanol.     

Diffusion of additives and plasticizers in poly(vinyl chloride): 4. A programmed temperature technique for the determination of the diffusion parameters of three dialkylphthalates

A programmed temperature technique has been developed for the measurement of the self-diffusion coefficients of additives in polymers. This has been applied to the diffusion of three dialkylphthalate plasticizers in poly(vinyl chloride). Values of the self-diffusion coefficients and the calculated activation energies obtained in this way have been compared with values previously obtained from measurements at constant temperature. It has been shown that the programmed temperature technique gives a very rapid method for the estimation of the activation energy of self-diffusion.     

Fractionation of partially stereoregular poly(propylene oxide)

Partially stereoregular poly(propylene oxide) samples were synthesized via reactions catalysed by a preformed analytically defined trimethylaluminium hydrolysate. These samples were fractionated into two contrastingly different fractions.

1. (i) D-polymers: This fraction constituted the major part (up to 90%). It mainly contained cyclic low molecular weight oligomers (MW < 1000). The linear chains found in D-polymers had hydroxyl end groups. No double bonds could be detected spectroscopically.

2. (ii) K-polymers: This fraction was high molecular weight stereoregular polymer. Stepwise thermal precipitation from dilute isooctane solution of K-polymers yielded a succession of fractions which differed in melting point. It appears that the phase equilibria during the thermal precipitations were not controlled by the molecular weights of species.

Catalytic Combustion of Methane over Rare Earth Stannate Pyrochlore

Well-defined Ln₂Sn₂O₇ powders (Ln = La, Sm and Gd) with a phase-pure pyrochlore structure were synthesized by hydrothermal reaction. The catalytic activities of Ln₂Sn₂O₇ powders for methane combustion were measured. Methane oxidation started at 500 °C and increased with oxidation temperature. Catalytic methane combustion is strongly influenced by the presence of oxygen vacancies that form by breaking Sn–O lattice bonds as the temperature increases. Addition of manganese to the rare earth pyrochlores improved methane oxidation activity. Manganese-doped samarium stannate pyrochlore (Sm₂Sn_1.8Mn_0.2O₇) shows highest the catalytic activity. Light-off and complete oxidation temperatures were measured at about 400 and 650 °C, respectively.     

Selective gas transport in miscible PPO-PS blends

The permeation rates of He, CO₂ and CH₄ though miscible blends of polystyrene and poly(phenylene oxide) at 35°C are reported as a function of pressure. Sorption isotherms for CO₂ and CH₄ are also presented. By using ratios of the permeabilities of the pure gases the separation factors for the gas pairs He---CH₄ and CO₂---CH₄ can be estimated. For both pairs the estimated separation factor goes through a prominent maximum, thus indicating that these blends are more permselective than expected from the behaviour of polystyrene and poly(phenylene oxide). This stems from mobility considerations rather than solubility effects and a qualitative free volume argument is proposed as an explanation. The sorption and transport data have been interpreted and correlated using the dual sorption-mobility models developed previously for glassy polymers. Since the commercial polystyrene used contained a small amount of mineral oil to improve flow behaviour, the effect of this additive on polystyrene properties was explored in some detail.     

透明聚烯烃用成核剂合成的研究

介绍了聚烯烃成核剂合成反应所用助剂选择,反应条件的确立,利用均匀设计实现最佳配比实验,对不同侧基苯甲醛缩合反应进行了研究。