N,N′-二(β-十八酰氧基)乙基乙二胺二乙酸钠的合成及性能研究

用 N,N′-二羟乙基乙二胺、氯乙酸钠合成了 N,N′-二羟乙基乙二胺二乙酸钠(中间体),中间体再与硬脂酰氯反应制备了一种新型 Gemini 两性表面活性剂 N,N′-二(β-十八酰氧基)乙基乙二胺二乙酸钠。对产物合成条件进行了考察,优化的反应条件为:n(硬脂酰氯):n(中间体)=2.5,溶剂 V(水):V(氯仿)=1:2,pH=9.0～10.0,反应温度15～20℃,反应时间5 h。通过红外光谱和质谱分析确定了产物结构,并测试了产物的表面性能。结果表明,在25℃时,该产物的临界胶束浓度为0.24 mmol/L,临界胶束浓度下的表面张力为35.7 mN/m;即时泡沫高度为250 mm,5 min 后泡沫高度为220 mm;乳化时间为22.48 min(甲苯-水物系)和4.65 min(正己烷-水物系),亲水-亲油平衡值为5.4,等电点为 pH 3.3～6.5。     

Effect of fluoropolymer antidripping agent on the microstructure and properties of polyesters

Poly(ethylene terephthalate) (PET) is of excellent mechanical properties and melt processability and is widely used as raw material for textile fibers. However, the flame retardant properties of PET were rather poor, and both reactive and additive phosphorus- and halogen-containing compounds have been employed to enhance the reaction-to-fire properties while the meltdripping behaviour during burning hasn’t been handled properly with the flame retardants. In this work, fluoropolymer was blended with both pure PET (pPET) and reactive phosphorus-containing flame retarded copolyester (fPET), and the flame retardance and char formation and mechanical properties of the resulted pPET and fPET blends were investigated. The tensile strengths of modified pPET samples were worsen whereas those of modified fPET samples were improved at low concentrations. The initial thermal degradation in nitrogen was accelerated remarkably for the two polyesters with fluoropolymer. The oxygen indices of the all modified samples were reduced while char formation and meltdripping suppression were encouraged. The apparent melt viscosity and elasticity for the two polyesters were gained much with antidripping agent. Therefore, fluoropolymer improved char formation of the two polyesters based on the gaseous phase mechanism while the partial suppression of meltdripping behavior and the decrease of mechanical properties mainly originated from the increase of melt viscosity via fibrillation for pPET.     

非定常流弯肘型尾水管不规则压力脉动预测

尾水管内螺旋状涡带引起的压力脉动是造成混流式水轮机机组振动的主要原因之一,直接威胁机组的安全运行。为此,提出一种基于CFD数值计算的水轮机尾水管压力脉动数字化预测法,并利用此法对一大型混流式水轮机偏工况下尾水管内水流流动进行了长时间非定常流计算,讨论该工况下尾水管内死水域与涡带的运动规律,预测了尾水管的不规则压力脉动,压力脉动分析结果表明,其波形、频率、相位与实际基本一致。     

Influence of BaO on Pd/Al2O3-based catalysts in C2H4 and CO oxidation as well as in NO reduction

In this study, Pd/Al₂O₃ and Pd/BaO/Al₂O₃ metallic monoliths were used to investigate the effect of BaO in C₂H₄ and CO oxidation as well as in NO reduction. A FT-IR gas analyser was used to study the activity of the catalysts. Several activity experiments carried out with dissimilar feedstreams revealed that BaO enhances CO and C₂H₄ oxidation as well as NO reduction reactions in rich conditions. This effect is due to BaO, which causes a decrease in the ethene poisoning of palladium. In lean conditions BaO is present in the form of Ba(OH)₂ which reacts with oxidised NO releasing water. Therefore, NO was stored during the lean reaction.     

DSP技术在液压混合动力汽车能源控制方面的应用

文章分析了液压混合动力汽车的发展趋势,简述数字信号处理器(DSP)作为控制器的优势和DSP作为控制器对并联式混合动力液压车的能源控制的工作原理,给出了能源控制系统DSP信号流程图和主程序流程图。测试结果表明,DSP能源控制系统能够比较精确的对液压混合动力车的能量消耗与分配进行控制,具有很好的应用前景。     

SDI接口数字监视设备的设计与实现

介绍了一种对SDV(串行数字视频)信号进行解码的设备设计方案，提出了该系统的总体构架，并对该系统的硬件设计、软件设计进行了全面的论述。设计的产品具有较高的性能价格比，已进入了推广阶段。     

扬州芍药

研究扬州芍药的栽培简史,明确扬州芍药的历史地位,通过对扬州芍药现状的了解,提出积极措施,努力恢复扬州芍药的园艺地位.     

FHCF: A Simple and Efficient Scheduling Scheme for IEEE 802.11e Wireless LAN

The IEEE 802.11e medium access control (MAC) layer protocol is an emerging standard to support quality of service (QoS) in 802.11 wireless networks. Some recent work shows that the 802.11e hybrid coordination function (HCF) can improve significantly the QoS support in 802.11 networks. A simple HCF referenced scheduler has been proposed in the 802.11e which takes into account the QoS requirements of flows and allocates time to stations on the basis of the mean sending rate. As we show in this paper, this HCF referenced scheduling algorithm is only efficient and works well for flows with strict constant bit rate (CBR) characteristics. However, a lot of real-time applications, such as videoconferencing, have some variations in their packet sizes, sending rates or even have variable bit rate (VBR) characteristics. In this paper we propose FHCF, a simple and efficient scheduling algorithm for 802.11e that aims to be fair for both CBR and VBR flows. FHCF uses queue length estimations to tune its time allocation to mobile stations. We present analytical model evaluations and a set of simulations results, and provide performance comparisons with the 802.11e HCF referenced scheduler. Our performance study indicates that FHCF provides good fairness while supporting bandwidth and delay requirements for a large range of network loads. Pierre Ansel received a multidisciplinary in-depth scientific training in different fields such as Pure and Applied Mathematics, Physics, Mechanics, Computer Science and Economics from the Ecole Polytechnique, Palaiseau, France. Then, he joined the Ecole Nationale Superieure des Telecommunications, Paris, France in 2005 where he went further into electronics, databases, computer network security and high speed networks. He received a multidisciplinary master of sciences degree and an additional master of sciences degree in telecommunications in 2005. He did a summer internship in 2003 in INRIA, Sophia Antipolis, France where he worked on the Quality of Service in 802.11 networks at Planete Group, France. Then in 2004, he joined France Telecom R&D, Issy-les-Moulineaux, France to work on Intranet Security issues. He designed a WiFi security supervision architecture based on WiFi Intrusion Detection Sensors. He is currently a French civil servant and belongs to the French Telecommunications Corps. Qiang Ni received the B.Eng., M.Sc. and Ph.D. degrees from Hua Zhong University of Science and Technology (HUST), Wuhan City, China in 1993, 1996 and 1999 respectively. He is currently a faculty member in the Electronic and Computer Engineering Division,School of Engineering and Design, Brunel University, West London, U.K. Between 2004 and 2005 he was a Senior Researcher at the Hamilton Institute, National University of Ireland, Maynooth. From 1999 to 2001, he was a post-doctoral research fellow in the multimedia and wireless communication laboratory, HUST, China. He visited and conducted research at the wireless and networking group of Microsoft Research Asia Lab during the year of 2000. From Sept. 2001 until may 2004, he was a research staff member at the Planète group of INRIA Sophia Antipolis France. Since 2002, he has been active as a voting member at the IEEE 802.11 wireless LAN standard working group. His current research interests include communication protocol design and performance analysis for wireless networks, cross-layer optimizations, vertical handover and mobility management in mobile wireless networks, and adaptive multimedia transmission over hybrid wired/wireless networks. He has authored /co-authored over 40 international journal/conference papers, book chapters, and standard drafts in this field. He is a member of IEEE. E-mail: Qiang.Ni@ieee.org Thierry Turletti received the M.S. (1990) and the Ph.D. (1995) degrees in computer science both from the University of Nice – Sophia Antipolis, France. He has done his PhD studies in the RODEO group at INRIA Sophia Antipolis. During the year 1995–96, he was a postdoctoral fellow in the Telemedia, Networks and Systems group at LCS, MIT. He is currently a research scientist at the Planete group at INRIA Sophia Antipolis. His research interests include multimedia applications, congestion control and wireless networking. Dr. Turletti currently serves on the Editorial Board of Wireless Communications and Mobile Computing.     

汽车排放控制系统中的氧传感器现状及展望

介绍了浓差型(Nernst型)、极限电流型和半导体电阻型等汽车排放控制系统中的氧传感器原理及结构。在综合该领域国内外研究现状的基础上,对氧传感器的发展进行了展望。     

Complex system reliability modelling with Dynamic Object Oriented Bayesian Networks (DOOBN)

Nowadays, the complex manufacturing processes have to be dynamically modelled and controlled to optimise the diagnosis and the maintenance policies. This article presents a methodology that will help developing Dynamic Object Oriented Bayesian Networks (DOOBNs) to formalise such complex dynamic models. The goal is to have a general reliability evaluation of a manufacturing process, from its implementation to its operating phase. The added value of this formalisation methodology consists in using the a priori knowledge of both the system's functioning and malfunctioning. Networks are built on principles of adaptability and integrate uncertainties on the relationships between causes and effects. Thus, the purpose is to evaluate, in terms of reliability, the impact of several decisions on the maintenance of the system. This methodology has been tested, in an industrial context, to model the reliability of a water (immersion) heater system.