Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

Linear viscoelastic properties of mixtures of 3- and 4-arm polybutadiene stars

The viscoelastic properties of a three-arm and a four-arm star polybutadiene with the same arm molecular weight (M_a) were studied. The zero-shear recoverable compliance (J⁰_e) and plateau modulus (G⁰_N) for these stars are the same. The zero-shear viscosity (η₀) of the three-arm star is 20% lower than that of the four-arm star. Mixtures of the stars had J⁰_e and G⁰_N unchanged. A $\text{50}\text{50}$ mixture of the three- and four-arm star was diluted with a low molecular weight linear polybutadiene. G⁰_N∝ø²; J⁰_e∝ø^?1 and M_e∝ø^?1, as expected for dilution with a θ-solvent.     

注聚井注入状况诊断方法研究

在室内试验和动态分析的基础上，对引起注聚井注入困难的原因进行了分析，提出了利用单井动态预测结果和实际注入动态曲线对比判断聚合物注入状况的方法，建立了预测注聚井注入动态的预测模型，并对数值模拟计算结果进行了分析。同时还评价了现场应用效果。通过数值模拟和实际注入动态曲线对比，可以初步判断待措施井有无近井地带堵塞，为提高注聚井压解堵措施的有效性奠定了基础。     

透湿膜的透湿机理与膜的研究概况

基于透湿膜的空气除湿是一种比较新颖的空气除湿方法。本文介绍了各种膜在空气除湿领域的应用情况，结合对膜制备工艺的简要介绍，侧重对原除湿原理，亲水性的高分子纤维素膜，凝胶膜和分子筛无机膜在空气除湿领域的研究和进展进行了分析。     

DSC and DMTA characterization of ternary blends

The phase behavior of ternary blends made of poly(epichlorohydrin) (PECH), poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) has been investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). DMTA measurements have been shown to be more sensitive than DSC for the detection of a second phase, for the determination of the composition of each phase, and the distribution of PECH in each of them. About 70% PECH was required to obtain a single narrow T_g in the ternary system, which suggests a single homogeneous phase in the limit of sensitivity of DMTA. This study also emphasizes the importance of the composition of the immiscible polymer pair (i.e. the PVAc/PMMA pair in the PECH/PVAc/PMMA system), in addition to the thermodynamic interaction parameters, for controling the phase behavior of ternary systems.     

液晶杂环高聚物的合成

首次较详细地论述了聚苯撑苯并二噻唑或二咪唑（ＰＢＴ或ＰＢＯ或ＰＢＩ）、聚苯并噻唑或恶唑（ＡＢＰＰＢＴ或ＡＢＰＢＯ）、聚苯并二咪唑苯并菲绕啉二酮（ＰＱ）及其衍生物的合成方法和相应的特性粘数。     

Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002     

耐盐性高吸水树脂的研究进展

综述了近年来国内外提高吸水树脂耐盐性的研究进展，概述了高吸水树脂的结构和吸水机理，归纳了引入亲水单体、降低树脂颗粒微环境的盐浓度等提高吸水树脂耐盐性的方法。     

Effects of fluoropolymer addition to an epoxy on scratch depth and recovery

Samples were prepared by addition of a fluorinated poly(aryl ether ketone) (12F-PEK) to a commercial epoxy resin and curing at either 24 °C or 70 °C. The concentrations of fluoropolymer in the samples were 0, 5, 10, 20, 30, 40, and 50%. Phase inversion facilitates the formation of more and more smooth surfaces for scratch testing with increasing fluoropolymer concentration. A progressively increasing load from 0.03 N to 12 N was administered with a diamond tip to the surfaces of the samples; depths were determined within ±7.5 nm. The original scratch depth is a function of the fluoropolymer concentration. Scratch recovery (healing) reaches values up to 95%. Plots of the residual depth versus concentration of the fluoropolymer at 4, 6, 8, and 10 N reveal minima for all forces and both temperatures. Addition of only 5% or 10% 12F-PEK improves the scratch recovery significantly. The results are explained by changes of material morphology with the fluoropolymer concentration. Electronic Publication     

A study of suppression of vapor explosions by adding inversely soluble polymers

The mechanism of the suppression of vapor explosions by adding inversely soluble polymers in water is studied. Vapor explosion experiments and quench experiment are conducted using a silver test piece. Polymetric solution (polyethylene oxide), of concentrations from 0 to 500 wppm, whose normalized viscosity (by water) varies from 1.00 to 2.00, is used. No vapor explosion is observed in the aqueous polymer solution at a concentration higher than 200 wppm. Quench experiments using the silver test piece submerged in the polymer solution and water are performed in order to examine the stability of film boiling. The suppression of the vapor film collapse is attributed to the precipitation of polyethylene as a gel around the vapor film. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(4): 297–306, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10037