多孔介质中有效孔扩散系数的试验测量

提出了通过实时测量扩散过程中多孔介质浮重变化,直接测定有效扩散系数的方法.首先建立了联系有效扩散系数和试件浮重变化的数学模型,并求出了该模型的解析解;利用非线性超定方程组优化求解的方法,结合问题的解析解和实测数据,反求出模型中的参数,有效扩散系数和边界层传质系数.用上述参数预测的试件浮重变化与实测浮重变化相差很小.表明该方法的实用性和可靠性.     

Characteristics of water inflow and chemical grouting treatment of a Liu Yuanzi Coal Mine shaft in the Ordos Basin

During shaft constructing, a borehole water inflow of 30 m3/h was encountered in Liu Yuanzi Coal Mine in the southwestern Ordos Basin, whose aquifer is mainly cretaceous. On the basis of regional hydrogeological conditions, a mercury intrusion method and scanning electron microscope were used in this study. We conclude that the loose, porous and easily collapsible clay particles of the cretaceous aquifer rock mass were the major geological cause for water hazards during the construction of the shaft. We propose an approach of chemical grouting from the working surface and in the end succeeded in blocking the water.     

Preparation and electrochemical characterization of activated carbons by chemical-physical activation

A process was proposed based on the combination of chemical and physical activation for the production of activated carbons used as the electrode material for electric double layer capacitor (EDLC). By material characterization and electrochemical methods, the influences of the activitation process on the specific surface area, pore structure and electrochemical properties of the activated carbons were investigated. The results show that specific surface area, the mesopore volume, and the specific capacitance increase with the increase of the mass ratio of KOH to char (m(KOH)/m(char)) and the activation time, respectively. When m(KOH)/m(char) is 4.0, the specific surface area and the mesopore volume reach the maximum values, i.e. 1 960 m²/g and 0.308 4 cm³/g, and the specific capacitance is 120.7 F/g synchronously. Compared with the chemical activation, the activated carbons prepared by chemical-physical activation show a larger mesopore volume, a higher ratio of mesopore and a larger specific capacitance. Foundation item: Project(2007BAE12B01) supported by the National Key Technology Research and Development Program of China     

真空烧结温度对多孔钛影响的研究

以碳酸氢铵做造孔剂,采用真空烧结法制备出生物多孔钛．研究了烧结温度对多孔钛显微形貌、显气孔率、抗压强度的影响．研究表明,提高烧结温度,有利于Ti晶体的发育,并提高制品抗压强度．     

含沙稠油过滤孔尺寸优化研究

为设计一种能最大限度地滤除沙砾而不影响抽油效率的过滤器,研究含沙稠油最佳滤孔半径。基于油膜凹度测定实验,确定油液团破裂角,依据实验数据建立稠油过滤器数学模型,通过模型计算,找出在一定压力和黏度下稠油可穿越的最小滤孔半径。     

在柠檬酸中制备大孔径阳极氧化铝模板的方法

现有的报道普遍认为柠檬酸作为阳极氧化铝的反应溶液只能制备出致密型的氧化铝膜。笔者发现柠檬酸作为反应溶液在350V直流电压下可制备出孔径600nm左右的多孔型的阳极氧化铝模板(AAO)模板.通过与以往研究结果比较发现要想获得较大孔径的AAO模板需要选择较小电离常数的酸液.在去除阻挡层时,磷酸腐蚀了模板的反面,导致模板反面的孔径大约是正面孔径的一倍.     

儿茶素在离子交换纤维上的扩散机理研究

研究了静态下儿茶素在自制的聚丙烯基阴离子交换纤维上的扩散机理。结果表明，离子交换纤维对儿茶素的吸附主要以扩散而不是以交换为主控步骤．在反应的初期．以液膜扩散为主，反应3min后．以孔隙扩散控制为主。     

Pore Propagation Directions in P+ Porous Silicon

A comparative study is presented on the pore propagation directions of porous silicon layers (PSL) formed on p⁺-type substrates of different orientations. PSLs were formed on plain (0 0 1) and (1 1 1) silicon wafers as well as on structured (0 0 1) wafers containing facets of various orientations. During anodization, regular pores follow the 0 0 1 direction on the (0 0 1) planes. While on the (1 1 1) planes fewer regular pores develop and seemingly propagate closely to the 1 1 1 direction. These results indicate that the pores propagate perpendicular to the surface i.e. along the field lines when the surface orientation is either (0 0 1) or (1 1 1).When the silicon surface provided (1 1 0) orientation (Chuang, Collins, and Smith, 1989), or its position is in between the (0 0 1) and (1 1 1) planes then the pores do not propagate perpendicular to the surface but along the 0 0 1 direction.All the phenomena exhibited might be explained by presuming that during formation, the pores propagate along the 1 0 0 directions, and that those 1 0 0 directions are preferred which are closely to the field lines. In PSLs formed on (0 0 1) surfaces the field lines and the 0 0 1 crystallographic direction are coincident. However, in the (1 1 1) oriented wafer where three equally probable 1 0 0 directions exist around the field lines, more irregular structure of PSLs will develop.     

Alkylation of toluene with 1‐dodecene over HFAU zeolite. Deactivation and regeneration

The alkylation of toluene with 1dodecene was carried out over a HFAU zeolite (total and framework Si/Al ratio = 25) under the following conditions: fixedbed reactor, 90°C, molar toluene/dodecene ratio of 3, WHSV =10 h^–. Monododecyltoluenes are selectively formed, bidodecyltoluenes appearing only in low amounts at a complete conversion of dodecene. Tridodecyltoluenes are also formed inside the supercages but cannot desorb from the zeolite. These compounds, mainly located in the outer part of the crystallites are responsible for catalyst deactivation. However, tridodecyltoluenes can be completely removed by treatment under toluene flow, which allows a complete regeneration of the catalyst. This removal occurs by transalkylation between tridodecyltoluenes and toluene molecules with a final formation of monododecyltoluenes. At least, the first transalkylation steps occur between toluene in the liquid phase and tridodecyltoluenes in the zeolite pores (pore mouth catalysis).     

粉煤灰水泥基材料的水化产物

用热重仪-差示扫描量热仪、扫描电子显微镜、透射电子显微镜、X射线能量散射、高分辩电子显微镜、压汞仪,测定了粉煤灰水泥基材料水化产物的形貌特征、微观结构、化学组成及水泥石的孔结构,讨论了水化产物性质及水泥石孔结构随粉煤灰掺量的变化规律。结果表明：粉煤灰的大量掺加,可以改善凝胶的化学组成。水化后期,粉煤灰与Ca(OH)2及由熟料水化生成的高n(Ca)／n(Si)的水化硅酸钙(C—S—H)凝胶发生二次水化反应,生成低n(Ca)／n(Si)的C—S—H凝胶,此种凝胶的固碱能力强,可减少碱-集料反应的危害性。同时,二次水化产物能够填充那些对水泥石强度和耐久性极为不利的孔隙空洞,使水泥石的结构更加致密,优化水泥石的孔结构,对提高水泥基材料的耐久性作用极大,为进一步提高工业废渣利用的技术水平奠定了基础。