工业化陶瓷超滤膜的表征

以液-液排除法测定工业化陶瓷超滤膜的孔径及孔径分布，比较了两种渗透体系对测定结果的影响；用已知分子量标准物质考察了不同膜的截留行为，获得了各膜的切割分子量值，并分析了截留率与孔径的对应关系，为工业化陶瓷膜的开发提供依据。     

多孔粒状铵油炸药在边坡预裂爆破中的应用

通过工程实践，介绍了利用多孔粒状铵油炸药进行边坡预裂爆破的设计原理及施工工艺。该技术能确保预裂爆破质量。简化施工工序，大幅度降低爆破成本。技术经济指标优越。     

PLC陶瓷工业窑炉可靠性及自动巡检功能设计

介绍了由PLC组成的陶瓷刀具高温烧结窑的热工系统控制及自动故障巡检功能 ,讨论了系统设计中的主要环节及出现的问题     

驻极体声传感器及其储电材料的现状

综述了驻极体声传感器及其储电材料近年来的迅猛发展。传统的FEP(tetrafluoroethylene—hexa—fluoropropylene copolymer)极体电容式声传感器及以铁电聚合物PVDF(poly vinylidene fluoride)家族为芯片的声传感器和超声抉能器仍焕发着青春活力。Si基微型驻极体声传感器的理论和实验研究已经日趋成熟，而用空间电荷型多孔聚合物驻极体压电薄膜为芯片可望研制出新一代声电和电声传感器、压力传感器和驱动器。     

Flow of solutions of hydroxypropyl guar-poly(ethylene oxide) mixtures through a porous medium

Summary In flow through porous media, solutions of poly(ethylene oxide) (PEO) exhibit extension thickening, whereas hydroxypropyl guar (HPG) solutions are shear-thinning at high concentrations. The results show that the extension-thickening exhibited by PEO solutions becomes less critical with increasing flow rate as the concentration of HPG in the solution is increased. At high concentrations of HPG, the presence of PEO inhibits the shear-thinning behaviour, without increasing the apparent viscosity of the solution. The presence of HPG reduces the rate and extent of degradation of PEO in the flowing solution.     

Thermal Shock Behavior of Porous Silicon Carbide Ceramics

Using the water-quenching technique, the thermal shock behavior of porous silicon carbide (SiC) ceramics was evaluated as a function of quenching temperature, quenching cycles, and specimen thickness. It is shown that the residual strength of the quenched specimens decreases gradually with increases in the quenching temperature and specimen thickness. Moreover, it was found that the fracture strength of the quenched specimens was not affected by the increase of quenching cycles. This suggests a potential advantage of porous SiC ceramics for cyclic thermal-shock applications.     

Effect of fiber types on relevant properties of porous asphalt

The research was conducted to evaluate the effects of cellulose and polyester fibers on the properties of porous asphalt mixes, using the tests of draindown, abrasion, volumetric properties, rutting, and moisture damage. Images of scanning electron microscopy and X-ray computerized tomography were adopted to identify the microstructure of the fiber and inner stone skeleton of porous asphalt. The influence of rutting parameter （G＊/sin δ） of asphalt modified by different fibers on the rutting resistance of the mixes was investigated. Based upon MOHR-COULOMB theory, the cohesion and the angle of internal friction of the mixes were derived from both indirect tension and unconfined compression strength. The experimental results indicate that fibers mainly stabilize asphalt binder and thicken asphalt film around aggregates. Furthermore, they result in the improved mechanical strength of porous asphalt mixes at high temperature slightly. From comparison analysis, cellulose fibers appear to perform better than polyester fibers in porous asphalt mixes.     

一种中温C/C复合材料抗氧化涂层的制备及其性能

制备了一种工作温度约1 173 K的C/C复合材料抗氧化复合涂层,它由磷酸盐过渡层和陶瓷相阻挡层构成,通过与单一陶瓷相涂层的对比试验研究了它的抗氧化机理。涂覆有该复合涂层的C/C复合材料试样,在空气中1 173 K时氧化10 h的失重率为11.25％,氧化失重率为9.84×10~(-5)g/(cm~2·min),而且其氧化失重率随氧化时间延长而降低;4 h内经过30次从1 173 K至室温急冷急热循环后,失重率为6.38％,涂层基本完好,说明涂层在温度不超过1 173 K时具有良好的抗氧化性和抗热震性。该种涂层适合于中温下C/C复合材料的抗氧化保护。     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。