Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

Automated procedure to determine the thermodynamic stability of a material and the range of chemical potentials necessary for its formation relative to competing phases and compounds

We present a simple and fast algorithm to test the thermodynamic stability and determine the necessary chemical environment for the production of a multiternary material, relative to competing phases and compounds formed from the constituent elements. If the material is found to be stable, the region of stability, in terms of the constituent elemental chemical potentials, is determined from the intersection points of hypersurfaces in an (n−1)$(n-1)$-dimensional chemical potential space, where n$n$ is the number of atomic species in the material. The input required is the free energy of formation of the material itself, and that of all competing phases. Output consists of the result of the test of stability, the intersection points in the chemical potential space and the competing phase to which they relate, and, for two- and three-dimensional spaces, a file which may be used for visualization of the stability region. We specify the use of the program by applying it both to a ternary system and to a quaternary system. The algorithm automates essential analysis of the thermodynamic stability of a material. This analysis consists of a process which is lengthy for ternary materials, and becomes much more complicated when studying materials of four or more constituent elements, which have become of increased interest in recent years for technological applications such as energy harvesting and optoelectronics. The algorithm will therefore be of great benefit to the theoretical and computational study of such materials.     

Methane activation over La2xY2-2xO3 (0 ⩽x ⩽ 1) catalysts

The influence of the structure on the catalytic methane activation coupling activity has been shown for La_2x Y_2–2x O₃ (0 x 1) compounds. A perovskite structure leads to total oxidation (CO, CO₂) whereas a bixbyite structure results in C₂ hydrocarbon formation. This change in selectivity is interpreted in terms of the difference in oxygen environment of lanthanum in the two stuctures.     

Molecular association complex of urea with polyethylene: 3. Structural studies of the complex

The crystal structure of urea-polyethylene complex in the hexagonal form, obtained by one of our preparation methods, is analysed by X-ray power diffractometry. In this analysis, the fixed molecular parameters of urea are used, and three models with respect to rotational disorder of the guest polyethylene molecule are assumed. It is shown that the host lattice structure constructed by urea molecules is essentially the same as that of urea-n-paraffin complex. Effects of the disorder structure of the guest on X-ray scattering of the complex are presented. However, there is a difficulty in identifying the disorder structure by X-ray analysis. With the aid of a potential energy calculation between the hexagonal urea tunnel and the guest molecule, a rotational disorder model is preferred.     

外加电流阴极保护在海水冷却槽中的应用

论述了金属的电化学腐蚀和外加电流阴极保护原理。说明对以海水为介质的冷却、冷凝设备,采用外加电流阴极保护是防止设备腐蚀的有效方法。举例说明了应用效果。     

纳米碳酸钙的表面活化改性研究

本文主要介绍通过加入特定的表面改性剂,制得了表面改性的活性碳酸钙.并对活化过程中的一系列影响因素,如活化温度、活化时间、碳酸钙悬浊液浓度、表面改性剂用量进行了研究.     

抗氧剂3114合成反应热力学和动力学的研究

研究了常温溶剂法合成抗氧剂3114反应热力学和动力学过程。控制温度在117±2℃,研究结果表明,反应是零级反应,反应速率常数k=1.91×10-3/min,反应的平衡常数K=138.4(mol/L)-6,反应活化能Ea=1366.2J/mol。     

Proton diffusion in γ-manganese dioxide

Deconvolution of the electrolytic manganese dioxide (EMD) discharge curve has indicated the presence of a number of energetically different reduction processes. This has been used to determine the contribution of each reduction process to the total discharge. Using step potential electrochemical spectroscopy (SPECS), the i-t data were modelled as the sum of the discharge of the individual reduction processes. From this, A√ D for each reduction process as a function of degree of discharge was determined. The maximum A√ D values for each process ranged from 2.3×10⁻² to 4.0×10⁻⁴ cm³ s^−1/2 g⁻¹ values are consistent with previously reported values for A√ D, although in this case we have determined values for the entire compositional range.     

The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process

The structure of benzoxazines is similar to that of phenolic resin through thermal self‐curing of the heterocyclic ring opening reaction that neither requires catalyst nor releases any condensation byproduct. These polybenzoxazine resins have several outstanding properties such as high thermal stability and high glass transition temperature. To better understand the curing kinetics of this copolybenzoxazine thermosetting resin, dynamic and isothermal differential scanning calorimetry measurements were performed. Three models, the Kissinger method, the Flynn–Wall–Osawa method, and the Kamal method, were used to describe the curing process. Dynamic kinetic activation energies based on Kissinger and Flynn–Wall–Osawa methods are 72.11 and 84.06 KJ/mol, respectively. The Kamal method based on an autocatalytic model results in a total order of reaction between 2.66 and 3.03, depending on curing temperature. Its activation energy and Arrhenius preexponential are 50.3 KJ/mol and 7959, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 730–737, 2005     

集中供热系统适量供热调节技术

集中供热的采暖用户实行计量收费并且具有自调节能力以后,必须要有与用户调节相匹配的运行调节手段,才能实现系统的适量供热.结合集中供热常用的系统形式,分别分析用户、热网及热源在各种运行方式下的调节特性及节能潜力,得出室内系统变流量、循环水泵变转速运行时节能量最高,并给出循环水泵定转速运行及变转速运行下的控制系统方框图.最后指出,应该针对新型供热系统和旧有供热系统的特点,制定相应的整体综合调节策略,才能实现节能最佳.