逆凝聚包覆法制备硫黄调节型粉末氯丁橡胶 Ⅰ.粒径分布

采用逆凝聚包覆法制备硫黄调节型粉末氯丁橡胶(PCR)并考察加料方式、搅拌转速和胶乳加人流速对产物粒径分布的影响。建立氯丁胶乳的逆凝聚粉末化模型并采用均匀试验设计的方法对该模型进行了验证。验证结果表明，该模型可以有效地模拟PCR的逆凝聚包覆氯丁胶乳的粉末化过程。PCR产物中粒径1～3mm的中等粒子的质量分数仅与搅拌转速有关，表明湍流爆裂是产生中等粒子的主要原因，而带状拉伸则是产生较粗颗粒和细小粒子的主要原因。扫描电子显微镜观察发现，采用逆凝聚包覆法制备的PCR粒子为单颗连续粒子，即产物粒子由单颗胶乳液滴凝聚而成。     

新型膨化硝铵硫磺工业炸药的研究

用膨化硝酸铵、硫磺、木粉和柴油作原材料，通过建立工业炸药配方设计及最优化数学模型，得到新型膨化硝胺硫横工业炸药配方。通过几种工业炸药的理论参数和实际爆炸性能的比较，得出新型膨化硝铵硫磺工业炸药具有低的成本和优良的爆炸性能。     

丁二酰亚胺在乳化炸药中的应用研究

研究了聚异丁烯丁二酰亚胺作为乳化炸药乳化剂的技术特点,并同常用乳化剂司苯 80作了比较。研究表明,以聚异丁烯丁二酰亚胺作为乳化剂的乳化炸药,具有小而分布均匀的W/O粒子,较强的稳定性及良好的爆炸性能。     

Particle size distribution,mixing behavior,and mechanical properties of carbon black (high‐abrasion furnace)–filled powdered styrene butadiene rubber

High‐abrasion furnace black (HAF, grade N330)–filled powdered styrene butadiene rubber [P(SBR/HAF)] was prepared and the particle size distribution, mixing behavior in a laboratory mixer, and mechanical properties of P(SBR/HAF) were studied. A carbon black–rubber latex coagulation method was developed for preparing carbon black–filled free‐flowing, noncontact staining SBR powders, with particle diameter less than 0.9 mm, under the following conditions: carbon black content > 40 phr, emulsifier/carbon black ratio > 0.02, and coating resin content > 2.5 phr. Over the experimental range, the mixing torque τ_α of P(SBR/HAF) was not as sensitive to carbon black content and mixing temperature as that of HAF‐filled bale SBR (SBR/HAF), whereas the temperature build‐up ΔT showed little dependency on carbon black content. Compared with SBR/HAF, P(SBR/HAF) showed a 20–30% mixing energy reduction with high carbon black content (>30 phr), which confers to powdered SBR good prospects for internal mixing. Carbon black and the rubber matrix formed a macroscopic homogenization in P(SBR/HAF), and the incorporation step is not obvious in the internal mixing processing results in these special mixing behaviors of P(SBR/HAF). A novel mixing model of carbon black–filled powdered rubber, during the mixing process in an internal mixer, was proposed based on the special mixing behaviors. P(SBR/HAF) vulcanizate showed better mechanical properties than those of SBR/HAF, dependent primarily on the absence of free carbon black and a fine dispersion of filler on the rubber matrix attributed to the proper preparation conditions of noncontact staining carbon black–filled powdered SBR. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2494–2508, 2004     

粉末活性炭-淹没式中空纤维膜过滤装置系统除酚研究

淹没式中空纤维膜过滤装置对污染物的去除，不仅是超滤膜的截留筛分在起作用，曝气作用及超滤膜对污染物质的吸附也起到不可忽视的作用。超滤膜无法截留酚，但膜过滤装置具有一定的除酚能力，曝气强度与酚去除率基本呈线性关系。粉末活性炭的投入，增强了淹没式中空纤维膜过滤装置的除酚能力，系统酚平均去除率为94．99％。     

Mechanical properties and crosslink density of rare earth‐modified high‐abrasion furnace‐filled powdered natural rubber

High‐abrasion furnace‐filled powdered natural rubber [P(NR/HAF)] has more advantages than traditional HAF‐filled bale NR (NR/HAF) because of its better environmental performance and easier processing quality, but its lower mechanical properties are disadvantageous. To improve the mechanical properties, rare earth‐modified HAF‐filled powdered NR [P(NR/HAF‐Ln)] (Ln = Sm,La,Pr) was prepared by means of coacervation–coprecipitation, using rare earth‐modified HAF as separant and filler. The effect on mechanical properties of P(NR/HAF‐Ln) vulcanizate exerted by the emulsifier/HAF ratio, powdering temperature, Ln/HAF ratio and type of Ln, and HAF content were studied. The results indicated that when optimum formulation, the mechanical properties of P(NR/HAF‐Ln) vulcanizate were better than P(NR/HAF) vulcanizate. In addition, the relationship of the apparent crosslink density and HAF content of P(NR/HAF‐Ln), P(NR/HAF), NR/HAF vulcanizates was also investigated, along with their SEM microphotographs of tensile fracture surface, which indicated that the excellent mechanical properties of P(NR/HAF‐Ln) vulcanizate was attributed to correct amount of Ln that could increase crosslink density and reinforce the interface structure of NR matrix/HAF‐Ln particle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1755–1762, 2006     

高纯竹叶碳苷黄酮复合纳米生物材料的制备及其结构表征（急）

采用离子交联法，以高纯竹叶碳苷黄酮制剂（碳苷总质量分数﹥90%，记为H-BLF）和芫根阴离子多糖（TP）为原料，通过ε-聚赖氨酸（ε-PL）的阳离子桥键合而成竹叶碳苷黄酮纳米混悬液（H-BLFnd），进一步在混悬液中添加8%（w/v）的γ-环糊精、经真空冷冻干燥得到纳米冻干粉（H-BLFnp），采用粒径分析、TEM、UV、FTIR、TG和DSC对其外观、性能、结构进行表征。结果表明： H-BLFnp外观为白色粉状，表面光洁平整，色泽均匀，平均粒径为（679±10.2）nm，分散系数为（0.349±0.004），包埋率为（92.39±0.34）%。     

高收率合成DADE的新方法

在比较DADE的3条文献合成路线基础上，研究了以2-甲基-4，6-嘧啶二酮为母体用硝硫混酸硝化生成中间体2-(二硝基亚甲基)-5，5-二硝基-2H-嘧啶-4，6-二酮、中间体水解合成DADE的方法。DADE总收率达到83％以上，用IR、MS、NMR及元素分析鉴定了其结构。     

模拟爆炸地震波及其对框架结构的影响

基于能够描述爆炸地震波的非平稳随机过程模型进行爆炸地震波的模拟研究,给出能够考虑装药量和爆心距影响的单点爆炸地震波实用模拟方法。以15层框架结构为例,运用有限元分析软件建立空间板梁结构的有限元模型,计算结构的固有频率和固有振型,分析高层框架结构在模拟爆炸地震波作用下的动力响应。根据结构动力响应结果,判断结构的薄弱层,为工程抗震设计提供参考依据。     

注装用改性B炸药渗油性的试验研究

通过中大口径榴弹战斗部注装改性B炸药后产生疵病的原因分析、实弹观察、注装过程物理特性及失效分析,参照TNT标准的渗油性试验方法,对原材料特性、制造工艺、长期储存所经历的任务剖面的综合分析及以相关试验为基础确定试验边界条件,提出改性B炸药的渗油性综合比较试验方案并进行检测,依此提出渗油性试验和工艺控制参数,为科学合理的评估注装弹药使用寿命周期提供试验依据.