冲压件CAPP系统中几何信息提取实现

基于对AutoCAD的DXF文件格式的详细分析，充分利用多义线的表达简洁性优点，并结合冲压件自身特点，提出了冲压件几何信息获取的方法及程序框架，详细说明了几何信息库的创建方法，并进一步采用Delphi6．0语言编程，实现了冲压几何信息库的建立和几何信息自动提取。     

振动机械的调整与质心的计算

以一台振动筛的故障处理为例,说明振动机械的激振与运动特点、调整原理及其应用。介绍用计算机计算参振零部件及设备质心的方法。     

提高钻杆接头冲击功的工艺方法

针对石油钻井关键产品高强度钻杆接头的使用要求,在保证强度指标要求非常高的前提下,研究摸索增加高温正火后再调质的工艺方法,以改善接头材料原始微观带状组织和纤维结构,细化晶粒,提高钻杆接头的冲击功,使该产品力学性能达到API标准的要求。     

锻压机械打击力测量误差的加速度补偿

提出了锻压机械打击力测量中存在的问题，介绍了常用的补偿法，并通过实验验证了加速度补偿法是消除锻压机械打击力测量误差的有效途径。     

应用BP神经网络的单机架可逆式冷轧机弯辊力预设定

针对单机架可逆式冷轧机生产过程中，由于不同热轧生产厂的热轧板形原料性能、板形差别较大、从而造成弯辊力预设定值和实际指标相差较大的问题，利用现场生产工艺数据丰富，采用人工智能BP神经网络的方法，通过大量数据输入进行训练，大大的提高了生产过程中弯辊力预设定值的准确性。     

Effect of ultrasonic power and bonding force on the bonding strength of copper ball bonds

Copper wire, serving as a cost-saving alternative to gold wire, has been used in many high-end thermosonic ball bonding applications. In this paper, the bond shear force, bond shear strength, and the ball bond diameter are adopted to evaluate the bonding quality. It is concluded that the ef/~cient ultrasonic power is needed to soften the ball to form the copper bonds with high bonding strength. However, excessive ultrasonic power would serve as a fatigue loading to weaken the bonding. Excessive or less bonding force would cause cratering in the silicon.     

An investigation of laser-assisted machining of Al2O3 ceramics planing

Laser-assisted machining (LAM), an alternative method of fabricating difficult-to-machine materials, uses primarily laser power to heat the local area (without necessarily evaporating or melting any material) before the material is removed. It not only efficiently reduces the cutting force during the manufacturing process but also improves the machining characteristics and geography with regard to difficult-to-machine materials, especially structural ceramics.This study on the application of laser-assisted machining to Al₂O₃ ceramics examines the measurements of cutting force and workpiece surface temperature as well as surface integrity and tool wear. Specifically, it uses the lattice Boltzmann method (LBM) to calculate the temperature distribution inside the ceramic workpiece during the LAM process and ensure that the laser energy causes no subsurface damage. The experimental results reveal that the LAM process efficiently reduces the cutting force by 22% (feed force) and 20% (thrust force) and produces better workpiece surface quality than conventional planing.     

多侧孔零件冲孔模设计

介绍了一副典型的多侧孔冲孔模的设计分析和模具结构。由于多侧孔冲压件，大多数是侧孔布置在冲压件的周围，因而冲孔凹模只能放在冲压件的内部，往往受到冲压件体积的限制，这样冲孔凹模的强度和刚度都受到极大影响，该文介绍了两种方法解决这一问题，可供同行在类似产品设计中参考。     

Al-18%Si合金在梯度强磁场中凝固时初生硅的行为

研究了Al-18%Si合金在10 T梯度强磁场下加热至半固态和全熔态后的凝固过程,观察了初生硅的分布和形态,测定了其冷却曲线.结果表明:在磁场的磁感应强度和磁场梯度的乘积Bz·dBz/dz为正时,初生硅向上部聚集;而在Bz·dBz/dz为负时,初生硅向下部聚集;在强磁场下,加热至全熔态冷却下来的凝固组织中初晶硅的形态发生了明显的改变,由板片状转变为块状,初晶硅显著细化.对强磁场细化初晶硅的机制进行了探讨.     

数控小孔冲床网眼平板加工中的波浪纹缺陷成因分析及排除

文章就数控小孔冲床加工纺织烘干设备中帘子网眼平板产生波浪纹缺陷的原因,进行了全面、详细的理论分析.在排除机床、模具精度影响的基础上,针对压料机构运动误差产生的机理和不利影响,详细分析了网眼冲孔加工产生波浪纹缺陷的根本原因,提出了相应的改进措施,在实践中具有良好的实用效果.