基于EMS系统的低频减载实时计算的实现

目前电网调度生产中尚不能实现低频减载的在线实时监测,调度无法及时掌握低频减载控制负荷,给电网的安全稳定运行造成一定的安全隐患。为解决该问题,在EMS系统中开发了基于设备的动态拓扑功能,利用广度优先算法将末端设备的负荷动态拓扑到需统计的单位母线上,从而实时显示每条母线8轮低频减载值,再利用E语言文件将计算好的值传给上一级单位进行更高电压等级母线的实时统计。     

肢体残疾人使用板式家具的设计实践

在日常生活中,肢体残障人士因其身体的种种不便,经常需要别人帮助。开发为残疾人设计的板式家具是让残疾人以最大限度地"自己完成"为设计目标,最大可能地帮助残疾人自己料理生活,提高生活质量。尽量减少照料人员时间和精力,同时还会增加残疾人的自信心,拓展其私人的生活空间。     

Atomic origin of the traps in memristive interface

In recent years,trap-related interfacial transport phenomena have received great attention owing to their potential applications in resistive switching devices and photo detectors.Not long ago,one new type of memristive interface that is composed of F-doped SnO2 and Bi2S3 nano-network layers has demonstrated a bivariate-continuous-tunable resistance with a swift response comparable to the one in neuron synapses and with a brain-like memorizing capability.However,the resistive mechanism is still not clearly understood because of lack of evidence,and the limited improvement in the development of the interfacial device.By combining I-V characterization,electron energy-loss spectroscopy,and firstprinciple calculation,we studied in detail the macro/micro features of the memristive interface using experimental and theoretical methods,and confirmed that its atomic origin is attributed to the traps induced by O-doping.This implies that impurity-doping might be an effective strategy for improving switching features and building new interfacial memristors.     

钇硅酸盐材料力学性能的第一性原理研究

为深入研究C_f/SiC复合材料钇硅酸盐涂层材料Y_2SiO_5与Y_2Si_2O_7的力学性能,为钇硅酸盐涂层体系的设计提供理论依据,基于第一性原理广义梯度近似,研究钇硅酸盐理想晶体X1-Y_2SiO_5和γ-Y_2Si_2O_7的电子结构、力学性能。结果表明:X1-Y_2SiO_5和γ-Y_2Si_2O_7均为机械稳定结构,X1-Y_2SiO_5与γ-Y_2Si_2O_7的体模量、剪切模量、弹性模量、泊松比分别为112,49,128GPa,0.31和114,55,142GPa,0.29。可见X1-Y_2SiO_5的模量较γ-Y_2Si_2O_7低。同时研究二者理想晶体的韧性、热膨胀系数、残余应力。结果表明:X1-Y_2SiO_5韧性较γ-Y_2Si_2O_7好,热膨胀系数较γ-Y_2Si_2O_7高,残余应力较γ-Y_2Si_2O_7低。     

不同浓度Cu掺杂SnO2材料电学和力学性质的研究

为研究Cu掺入对SnO_2性能的影响,本文采用密度泛函理论和平面波赝势法,建立了未掺杂SnO_2和不同比例Cu掺杂的SnO_2晶胞模型,对Sn_(1-x)Cu_xO_2(x=0、0.083、0.125、0.167、0.25、0.5)超晶胞体系进行优化计算、能量计算和弹性模量计算,得到晶格常数、弹性模量、电荷分布、能带结构和态密度图.研究表明:掺杂能够使得材料的弹性模量大幅减小,对应的硬化函数值降低,易于材料加工;在电性质方面,掺杂后,材料均属于直接带隙半导体材料.当x0.25时,由于掺杂浓度过高使得晶格发生畸变,电性质与未掺杂情况类似;当x0.25时,随着掺杂浓度的降低,导带收缩加剧,局域性增强,禁带宽度变窄,使得电子从价带受激跃迁所需能量降低,故掺杂后材料表现出半金属性,导电性增强.     

Efficient Body-Transfer Wheelchair for Assisting Functionally ImpairedPeople

Functionally impaired people always have difficulty accomplishing activities of daily living. In this regard, tasks including toileting and bathing have a higher prevalence rate of injuries and greater risk of falling. In this study, a body-transfer wheelchair was developed to assist people in transferring from bed to wheelchair for bathing, and toileting. The body-transfer wheelchair is a semi-automatic wheelchair that has features such as a controlled leg and backrest, linkage commode slot, and height adjustment. The wheelchair consists of a seat and a main frame that can be detached to enable bathtub transfer. This mechanism lets the user stay on the seat while being transferred into the bathtub without any risk of falling. A linkage mechanism was developed as a part of the seat for ease of toileting. Kinematic and force analysis was conducted to calculate the force required for each actuator. It has been proved by the experimental results that the wheelchair can securely and comfortably transfer a patient from the bed to the toilet or bathtub. A survey has been conducted to evaluate the wheelchair prototype design idea. Two focus groups were chosen: one comprised of functionally impaired people, and the other comprised of caregivers. The results of the survey show that 60% of both functionally impaired people and caregivers would like to use the body-transfer wheelchair for toileting and bathing purpose. Additionally, on average 65% of both focus groups find it convenient to operate the body-transfer wheelchair independently.     

讲好离散数学的第一次课

离散数学是计算机专业的核心基础课,文章针对离散数学内容散、概念多且容易被认为枯燥无味等特点,结合笔者多年的教学经验,分析并提出通过讲好离散数学第一次课提高教学效果的方法,该方法包含笔者总结的离散数学的重要性、离散数学的学习方法和经过加工的教学内容。实践表明该方法效果较好,对青年教师有一定的指导作用。     

Self-reported use of ICT (Information and communication technology) uptake in 2002 and discomfort amongst Finns aged 45-66

In recent years the use of new technical equipment and the Internet by middle-aged people has increased. This paper presents middle-aged people’s (45 years old or older) usage of new technical equipment and analyses how their (2704 persons) symptoms are associated with the equipment. Over 70% of Finland’s middle-aged population use mobile phones daily and less than 30% use desktop computers at leisure. For example, over 80% of middle-aged people had sometimes or often experienced pain, numbness or aches in the neck and about 70% had aches in the hip and lower back. The use of new technical equipment among the group of people who are outside working life was smaller than the people’s usage in general. In the future, when new technical equipment is developed, it is important to take into account, that people (outside working life) do not use, e.g., the Internet as much as people in general. The working environment will be much more ergonomic also at home and the Internet services will be easy to use for almost everyone, even those who have little experience or knowledge of computers and the Internet.     

一种基于XML的非线性编辑初剪辑技术研究

随着计算机信息技术的快速发展,非线性编辑已成为影视业界节目制播主要的工作模式.目前虽然通过数字化大大提升了初剪辑的工作效率,但由于仍采用现有的剪辑工作流程,时间成本消耗偏高.通过分析非线性编辑的需求,将XML架构应用在初剪辑工作中,建立起一套基于XML初剪方式的语法,以提高初剪辑工作效率及节目品质.     

Improving responsiveness of soft aperiodic tasks using proportional slack time

In a real-time system with both hard real-time periodic jobs and soft real-time aperiodic jobs, it is important to guarantee that the deadline of each periodic job is met, as well as to provide a fast response time for each aperiodic job. We propose an algorithm, called Proportional Slack Reserve (PSR), that produces an efficient schedule for such an environment. For every execution unit of a periodic job, the PSR algorithm reserves time which can be used for execution of aperiodic jobs. If reserved time is not available, the algorithm assigns a deadline to an aperiodic job for achieving better responsiveness of aperiodic jobs. The proposed algorithm can fully utilize processing power while meeting all deadlines of periodic jobs. It can also easily reclaim the time unused by the periodic job. We analytically show that for each aperiodic job, the response time in a PSR schedule is no longer than that in a TBS schedule, which is known to be efficient for servicing aperiodic jobs. We also present simulation results in which the response time of PSR is significantly improved over that of TBS, and moreover the performance of PSR compares favorably with TB(N) considering scheduling overhead.