YAG：Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.     

浅谈连城锰矿4号矿段排土场的安全管理实践

针对连城锰矿4号矿段排土场的特点、影响稳定因素及可能产生的危害，在实践中采取了有效的管理措施，防止了排土场危害的产生，保证了排土场的稳定。     

土质边坡稳定分析中条分法与有限元法的比较

对比分析了土质边坡稳定性计算中条分法和有限元法的特点，讨论了在有限元法中边坡稳定系数的计算方法，并针对铜钟水电站库区左岸滑坡分别采用条分法和有限元法研究其稳定性，计算结果表明两种计算方法得到的滑坡稳定系数规律相同，但条分法计算值一般大于有限元值，反映出条分法中部分基本假设与实际情况存在一定差异。     

Studies on the structural and ionic transport properties at elevated temperatures of La1−xMnO3±δ synthesized by a wet chemical method

Structural transformation and ionic transport properties are investigated on wet-chemically synthesized La_1−xMnO₃ (x=0.0–0.18) compositions. Powders annealed in oxygen/air at 1000–1080 K exhibit cubic symmetry and transform to rhombohedral on annealing at 1173–1573 K in air/oxygen. Annealing above 1773 K in air or in argon/helium at 1473 K stabilized distorted rhombohedral or orthorhombic symmetry. Structural transformations are confirmed from XRD and TEM studies. The total conductivity of sintered disks, measured by four-probe technique, ranges from 5 S cm⁻¹ at 298 K to 105 S cm⁻¹ at 1273 K. The ionic conductivity measured by blocking electrode technique ranges from 1.0×10⁻⁶ S cm⁻¹ at 700 K to 2.0×10⁻³ S cm⁻¹ at 1273 K. The ionic transference number of these compositions ranges from 3.0×10⁻⁵ to 5.0×10⁻⁵ at 1273 K. The activation energy deduced from experimental data for ionic conduction and ionic migration is 1.03–1.10 and 0.80–1.00 eV, respectively. The activation energy of formation, association and migration of vacancies ranges from 1.07 to 1.44 eV.     

NdCl_3·nTBP/MgCl_2-AlR_3催化体系合成丁二烯橡胶

探讨了以NdCl_3的磷酸三丁酯(TBP)溶液为主催化剂、烷基铝为助催化剂、MgCl_2为载体组成的Ziegler-Natta型催化体系引发丁二烯(Bd)聚合的某些规律。用AlEt_3作助催化剂,聚合物的顺1,4-结构含量仅为57％,反1,4-结构含量为42％;而以Al(i-Bu)_3作助催化剂,聚合物的顺1,4-结构含量为88％,反1,4-结构含量为11％。各种陈化体系中,以NdCl_3·nTBP/MgCl_2-Al(i-Bu)_3-Ip三元体系的催化活性最高,当Nd/Bd(摩尔比)为7×10~(-5)时,单体转化率达80％。低温聚合可获得高顺式、高分子量聚合物。     

Luminescence Characterization of Mg Doped Y2O2S:Ti Long Afterglow Phosphor

Y1.94-xMgxO2S:0.06Ti (0≤x≤0.10) phosphors with long afterglow were synthesized by solid state reaction route. The photoluminescence spectra, decay curves, thermoluminescent spectra and chromaticity coordinate curves were investigated. The results show that the luminescence intensity of Y1.94-xMgxO2S:0.06Ti (0≤x≤0.10) phosphors decrease gradually with increasing Mg2 ion content, and the shape of luminescence spectra and chromaticity coordinate change as well. Furthermore, two thermoluminescent peaks in single Ti-doped Y2O2S sample are found at 91.8 and 221.5 ℃, respectively. Nevertheless, significant different spectra were found for the Mg, Ti co-doped Y2O2S samples that three thermoluminescence peaks appear at 52.3, 141.7 and 226.8 ℃, respectively. These results indicate that the co-doped Mg ion changes the inherent trap depth of single Ti-doped Y2O2S:Ti phosphor, and induces simultaneously a new trap level in the Y1.94-xMgxO2S:0.06Ti phosphor. Based on the analysis of thermoluminescent spectra, photoluminescent spectra, decay curve and crystal structure defect, it was proposed that the varied structure defect and introduced new trap level by the doped Mg2 ions should be responsible for reducing luminescence intensity and varying color in the Y1.94-xMgxO2S:0.06Ti phosphor.     

Heterogeneous Plantinum Nucleation and Crystallization of a Heavy-Metal Fluoride Glass

The effect of controlled heterogeneous nucleation by platinum on the crystallization of a ZrF₄-BaF₂-LaF₃-AlF₃-NaF (ZBLAN) glass was studied. Various levels of platinum were incorporated into this glass by a combination of PtCl₂-doping and melting-atmosphere variation. The effect of doping levels and melting conditions on the incorporation of platinum and the subsequent nucleation of crystals was studied by optical microscopy, scanning electron microscopy, differential scanning calorimetry (DSC), and X-ray diffraction. Increased platinum in the glass resulted in an increased number of nucleation sites for the growth of β-ZrF₄-BaF₂ crystals. Analysis of isothermal and ramp-rate DSC measurements indicated that the crystallization of this glass changed from surface controlled to bulk controlled with an increased number of nuclei. This was confirmed by optical microscopy. In addition, Avrami analysis of the isothermal crystallization data gave an accurate approximation of the number of nuclei in the glass.     

高温稀土永磁Sm2(Co,Cu,Fe,Zr)17 的制备和性能

制备了高温稀土永磁材料Sm(Coba1Fe0．26Cu0．05Zr0．026)7．0，研究了磁性能与工艺条件的关系．结果表明：提高烧结温度可使材料的Br和(BH)max增大，但是使Hci降低；适当提高真空预烧温度，可使材料在较低烧结温度下致密化，具有较高的Hci和(BH)max和温度稳定性．真空预烧温度过高使性能的急剧降低，其主要原因是Sm的析出．在最佳工艺条件下材料的磁性能参数分别为：Br1．08T3Hci2286kA／m，Hcb932kA／m，(BH)max220．8kJ／m^3；β20-200℃为-0．19％／℃．     

稀土溶液标准物质的研制

选择7种稀土元素:La、Ce、Sm、Eu、Yb、Lu、Y为研究对象,采用高纯稀土氧化物(≥99 99%)为原料,经ICP MS及ICP AES对纯度进行分析后,分别制备成浓度为1000μg mL的稀土溶液标准物质。采用准确、可靠并能溯源的EDTA络合滴定法进行量值核对、均匀性及稳定性检验。对标准物质的不确定度进行了全面的评定。研制的稀土溶液一级标准物质,总不确定度优于0 6%,稳定性达两年以上。     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.