基于Web Service的建材租赁管理信息系统的设计与实现

提高信息化管理水平对建材租赁企业的发展显得日益重要。在业务需求分析基础上,对系统进行设计,采用JavaEE架构,结合WebService技术及Hibemate＋Structs框架技术,以MySQL为数据库对建材租赁管理信息系统进行开发。该系统由Web服务和客户端应用两部分组成,具有跨平台应用、数据可共享与互操作、耦合度低、灵活性好、可扩展性和通用性强的特点,可向企业提供建材租赁管理信息服务。具有一定的推广价值。     

改进BP网络在航材需求预测中的应用

针对航材备件需求预测问题,在对影响航材备件需求量的多个因素进行分析研究的基础上,运用改进BP神经网络算法进行预测的仿真实验。实验结果表明,改进BP神经网络能够对积累的历史数据进行充分的应用,并且有较高的预测准确性。     

土石坝工程领域的若干创新与发展

我国高土石坝数量居世界之首,保证高坝大库建设与长期运行安全是国家经济和公共安全保障的重大需求。系统总结了长江科学院近年来在土石坝工程领域的若干创新与发展。提出了基于“旁压模量当量密度法”的粗粒料级配相似理论试验方法;介绍了研发的系列CT三轴仪,实现了粗粒料组构要素的定量测量;提出了三轴试验中加载板与试样之间由滑动摩擦变为滚动摩擦、整体式接触变为分散式接触的减摩新方法,研发了相关减摩装置;研制了大尺寸、高压力、微摩擦、刚柔复合加载的土工真三轴仪;揭示了粗粒料真实三维应力条件下的强度与变形变化规律、湿化与蠕变变形特性;构建了粗粒料三参量非线性K-K-G剪胀模型、六参数湿化模型、九参数蠕变数学模型及相应的参数确定方法;基于当量密度法的原创思想,提出了利用旁压试验间接确定超百米级深厚覆盖层现场密度的试验方法。上述研究成果可为高土石坝工程建设提供重要科技支撑。     

Thermal expansion of Pyros from 20 to 1273 K

Pyros, which is a Ni-base alloy (82% Ni, 8% Cr, 4% W, 3% Mn, and 3% Fe), has been used extensively in France since 1926 as a temperature sensor and as a reference material for thermal expansion measurements. In this paper we present recent data on the expansion and expansivity of Pyros from 20 to 1273 K. Expansivity results, obtained by taking the derivative of a cubic-spline polynomial fitting performed to the L/L experimental data, show that Pyros is a stable material in the 20 to 1273 K temperature range. Furthermore, since the expansivity values are similar to those of steels, Pyros should be of special interest to laboratories which are concerned with expansion measurements on steels. Therefore, we suggest that Pyros be considered as a suitable reference material for thermal expansion measurements on steels, and until more accurate results are obtained, we propose our results as reference data between 20 and 1273 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

2000～2001年金属磁性功能材料新进展

综述了金属磁性功能材料在2000－2001年间的若干新进展，内容包括：（1）高性能稀土永磁合金；（2）高性能硅钢合金；（3）Fe-N系新磁性材料；（4）磁电子学；（5）形状记忆磁性材料。     

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Deposition of nanocrystalline TiO₂ coating at low temperature is becoming more attractive due to the possibility for continuous roll production of the coating for assembly lines of dye-sensitized solar cell (DSC) at a low cost. In this study, porous nano-TiO₂ coating was deposited by vacuum cold spraying (VCS) at room temperature on a conducting glass substrate using commercial P25 nanocrystalline TiO₂ powder. The microstructure of TiO₂ coating was characterized by field emission scanning electron microscopy (FESEM) and nitrogen adsorption test. A commercial dye (N719) was adsorbed on the surface of TiO₂ particles within the coating to assemble a DSC. The cell performance was evaluated by employing simulated solar light at an intensity of 100 mW/cm². The results showed that TiO₂ coating was deposited by the agglomerates of nano-TiO₂ powders. The Brunauer-Emmett-Teller (BET) test of the as-sprayed TiO₂ coating yielded a porosity of 49% and an average pore size of 17 nm. The assembled solar cell yielded a short-circuit current density of 7.3 mA/cm² and an energy conversion efficiency of 2.4%. The test results indicate that VCS was a promising method to deposit nanocrystalline TiO₂ coatings at low temperature applied to DSCs. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

新型陶瓷与熔融盐复合蓄热材料优化组合的数值模拟

将高温熔融盐相变蓄热材料和陶瓷固相蓄热材料进行复合 ,成功地研制成了能快速吸热和放热且蓄热密度高、蓄热量大的新型复合蓄热材料。分别以Al2 O3 ,MgO ,SiC为代表的陶瓷材料与 6 0LiF 40NaF ,5 0LiF 5 0KF ,6 0 .1NaCl 39.9MgCl2 ,LiH等为代表的 10余种高温熔融盐材料为复合研究对象 ,对复合蓄热材料的蓄热密度等与温度、复合材料中熔融盐的含量、材料种类间的关系进行了数值模拟研究 ,得到了对复合材料的优化设计具有指导意义的结论     

Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys

The material flow and microstructural evolution in the friction stir welds of a 6061-Al alloy to itself and of a 6061-Al alloy to 2024-Al alloy plates of 12.7 mm in thickness were studied under different welding conditions. The results showed that plastic deformation, flow, and mechanical mixing of the material exhibit distinct asymmetry characteristics at both sides of the same and dissimilar welds. The microstructure in dissimilar 6061-Al/2024-Al welds is significantly different from that in the welds of a 6061-Al alloy to itself. Vortex-like structures featured by the concentric flow lines for a weld of 6061-Al alloy to itself, and alternative lamellae with different alloy constituents for a weld of 6061-Al to 2024-Al alloy, are attributed to the stirring action of the threaded tool, in situ extrusion, and traverse motion along the welding direction. The mutual mixing in the dissimilar metal welds is intimate and far from complete. However, the bonding between the two Al-alloys is clearly complete. Three different regions in the nugget zone of dissimilar 6061-Al/2024-Al welds are classified by the mechanically mixed region (MMR) characterized by the relatively dispersed particles of different alloy constituents, the stirring-induced plastic flow region (SPFR) consisting of alternative vortex-like lamellae of the two Al-alloys, and the unmixed region (UMR) consisting of fine equiaxed grains of the 6061-Al alloy. Within all of these three regions, the material is able to withstand a very high degree of plastic deformation due to the presence of dynamic recovery or recrystallization of the microstructure. The degree of material mixing, the thickness of the deformed Al-alloy lamellae, and the material flow patterns depend on the related positions in the nugget zone and the processing parameters. Distinct fluctuations of hardness are found to correspond to the microstructural changes throughout the nugget zone of dissimilar welds.     

应用人工神经网络理论建立热粘塑性材料的本构关系

本文将人工神经网络（ＡＮＮ）用于建立热粘塑性材料的本构关系，意在探索出一种描述材料变形力学行为的新方法。文中给出了应用人工神经网络建立热粘塑性材料本构关系的ＢＰ模型和学习算法过程，并应用于４５号钢在高温和高速变形条件下的流动应力计算。计算结果与实测结果比较表明，二者吻合良好。因此，应用人工神经网络建立热粘塑性材料的本构关系具有重要的工程应用价值。     

Investigation into the morphological and mechanical properties of date palm fiber-reinforced epoxy structural composites

This study aims to examine the morphology and mechanical properties (tensile, flexural, and compressive) of epoxy composites reinforced with epoxy date palm leaves (EDPL), epoxy date palm branch (EDPB), and epoxy/hardener date palm core shell (EDPC) fibers (particle size <1 μm depend on the date palm fibers). A three-step technique was used to obtain the composites. The EDPL composites showed a maximum tensile strength of 3.45 MPa, while the EDPB composites showed maximum compressive and flexural rigidity of 9.46 and 5.55 MPa, respectively, owing to the good compatibility of fiber-matrix bonding. In this work, epoxy composites reinforced with date palm fibers (DPF) leaves, branches, and core shell were recycled using a cost-effective and easily reproducible three-step technique. EDPC fibers fabricated with 64.65% weight carbon fibers content demonstrated improved tensile strengths and stiffness properties. The three samples of palm date composites revealed mechanical properties that could be used to trial these fibers for manufacturing purposes, and to exploit their extraordinary mechanical properties shown in current results.