全钒液流电池用磺化聚芴醚酮质子交换膜的制备及性能

质子交换膜(PEM)作为全钒液流电池(VRFB)的核心组件之一,应当解决成本高昂、合成过程复杂等问题,并具备高质子传导率、低钒离子渗透率、高机械强度和优异化学稳定性等关键性能。本文基于四甲基双酚芴单体通过缩聚反应合成了一系列聚芴醚酮化合物PFEKs,再利用溴代反应将苯甲基功能化为溴甲基,接着通过4-羟基苯磺酸钠的SN₂亲核取代制得了一系列不同离子交换容量的磺化聚芴醚酮聚合物(SPFEKs)。通过溶液浇铸法成膜并酸化,得到一系列新型低成本PEMs。该合成路线的原料来源广泛,价格低廉,不涉及危险的磺化反应,易于工业放大。所得膜都具有良好的机械性能和氧化稳定性,其中SPFEK-40膜具有较高的质子传导率及离子选择性、较低的钒离子渗透率及面电阻,综合性能优异。以SPFEK-40膜组装的VRFB在电流密度为80 mA/cm₂^{时的能量效率}(EE)为88.2%,高于以Nafion 212膜组装的VRFB的84.8%。此外,以SPFEK-40膜组装的VRFB在30次循环后放电容量仅衰减至84.3%,远高于以Nafion 212膜组装的VRFB的66.1%。     

线性与超支化聚氨酯共聚体系固体电解质的研究

用超支化和线性聚氨酯的低交联共聚物(CHPU)作为聚合物基体,LiClO4为离子源制备了一系列的聚合物固体电解质。DSC分析显示该共聚物比共混物(MHPU)玻璃化转变温度低,红外和Raman光谱显示该共聚物比共混物对盐离子的溶解性能更强,同时该体系比共混物体系有更高的电导率,25℃时CHPU30/LiClO4体系的最佳电导率达到1.5×10-5S/cm。     

Solid-state photoelectrochemical device based on poly(3-hexylthiophene) and an ion conducting polymer electrolyte, amorphous poly(ethylene oxide) complexed with I3/I redox couple

The photoelectrochemical properties of a solid-state photoelectrochemical cell (PEC) based on poly(3-hexylthiophene), P3HT, and an ion-conducting polymer electrolyte, amorphous poly(ethylene oxide), POMOE, complexed with I₃⁻/I⁻ redox couple has been constructed and studied. The current–voltage characteristics in the dark and under white light illumination, transient photocurrent and photovoltage studies, photocurrent action spectra for front and back side illuminations and an open-circuit voltage and short-circuit current dependence on light intensity have been studied. An open-circuit voltage of 130 mV and a short-circuit current of 0.47 μA cm⁻² were obtained at light intensity of 100 mW/cm². IPCE% of 0.024% for front side illumination (ITO/PEDOT) and IPCE% of 0.003% for backside illumination (ITO/P3HT) were obtained.     

A Smart Flexible Solid State Photovoltaic Device with Interfacial Cooling Recovery Feature through Thermoreversible Polymer Gel Electrolyte

Quasi‐solid‐state dye‐sensitized solar cells (DSSCs) fabricated with lightweight flexible substrates have a great potential in wearable electronic devices for in situ powering. However, the poor lifespan of these DSSCs limits their practical application. Strong mechanical stresses involved in practical applications cause breakage of the electrode/electrolyte interface in the DSSCs greatly affecting their performance and lifetime. Here, a mechanically robust, low‐cost, long‐lasting, and environment‐friendly quasi‐solid‐state DSSC using a smart thermoreversible water‐based polymer gel electrolyte with self‐healing characteristics at a low temperature (below 0 °C) is demonstrated. When the performance of the flexible DSSC is hindered by strong mechanical stresses (i.e., from multiple bending/twisting/shrinking actions), a simple cooling treatment can regenerate the electrode/electrolyte interface and recover the performance close to the initial level. A performance recovery as high as 94% is proven possible even after 300 cycles of 90° bending. To the best of our knowledge, this is the first aqueous DSSC device with self‐healing behavior, using a smart thermoreversible polymer gel electrolyte, which provides a new perspective in flexible wearable solid‐state photovoltaic devices.     

Electrocatalytic performance of TiO2 with different phase state towards V2+/V3+ reaction for vanadium redox flow battery

In this paper, titanium dioxide (TiO₂) nanoparticles were employed as catalysts towards V²⁺/V³⁺ redox couple of vanadium redox flow battery (VRFB). The effect of TiO₂ phase on the electrocatalytic performance for negative couple was systematically investigated. The electrochemical properties of TiO₂ with different phase were assessed via cyclic voltammetry and electrochemical impedance spectroscopy by using AB as conductive agent. Obtained from the results, anatase TiO₂ (α‐TiO₂) exhibits superior electrocatalytic activity to rutile TiO₂ (γ‐TiO₂). The VRFB cell performs well at discharge capacity, voltage efficiency, and energy efficiency by employing α‐TiO₂‐modified negative electrode with current density varying between 50 and 100 mA cm^?2. The discharge capacity of α‐TiO₂‐modified cell with vanadium ion concentration of 1.6 M comes up to 113.5 mA h at 100 mA cm^?2 current density, which is increased by 39.1 mA h after modification for negative electrode. Moreover, the corresponding energy efficiency increases by 7.5% after modification of α‐TiO₂. Experimental results show that TiO₂ is an ideal catalyst for VRFB. Moreover, α‐TiO₂ demonstrates superior electrocatalytic performance to γ‐TiO₂ towards V²⁺/V³⁺ reaction.     

Redox Control in Solvent Extraction Studies Using a PEEK AKUFVE Unit

Abstract

When studying actinides or other elements with different possible oxidation states it is important to control which state is present in solution. Earlier redox control has been done by adding some other element to the solution but this approach introduces additional uncertainties. Since the sixties the AKUFVE apparatus has been used for precise solvent extraction studies. Now this equipment has been improved with redox control facilities, additional thermal control, and all parts in contact with the liquids are made of polyetherether ketone (PEEK) to minimize sorption.     

Minisymposium on Endogenous Carcinogens: The Catechol Estrogen Pathway. An Introduction

Abstract

A major carcinogenic risk for many human cancers may be associated with endogenous procarcinogens that are precursors to carcinogens. If natural protective mechanisms become insufficient, these procarcinogens can be activated, giving rise to formation of endogenous carcinogens. Catechol estrogens (CE), which are metabolites of the estrogens estrone and 17β-estradiol are hypothesized to be such ubiquitous procarcinogens. Their oxidation to CE semiquinones and/or quinones can generate the DNA damage that leads to the tumor initiation process. In addition, redox cycling of CE semiquinones and quinones can generate free radicals that lead to enhancement of DNA damage. The minisymposium discussing this area of research was moderated by Pentti Siiteri and introduced by Ercole Cavalieri. It included presentations by Joachin Liehr, Judith Weisz, Cyrus Creveling and Herman Adlercreutz.     

How oxide carriers affect the reactivity of V2O5 catalysts in the oxidative dehydrogenation of propane

The catalytic pattern of several oxide carriers (MgO, Al₂O₃, ZrO₂, TiO₂, SiO₂, HY zeolite) and supported V₂O₅ (4.7–5.3 wt%) catalysts in the oxidative dehydrogenation of propane to propylene (PODH) has been comparatively investigated. The fundamental role of the oxide support on both reducibility and reactivity of vanadia catalysts has been assessed. A direct relationship between the specific surface activity of oxide carriers and that of vanadia catalysts is discussed. The inverse relationship between the specific activity and the onset temperature of reduction marks the prevailing redox behaviour of V₂O₅ catalysts in the PODH reaction. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ni(Ⅳ)引发丙烯酸甲酯与三元尼龙接枝共聚反应的研究

以二过碘酸合镍(Ⅳ)钾〔Ni(Ⅳ)〕为氧化剂,共聚尼龙上的弱的还原基团(酰胺基)为还原剂,组成氧化还原引发体系,于碱性介质中直接在共聚尼龙分子骨架上产生接枝点,引发丙烯酸甲酯(MA)的接枝共聚合反应,获得了较高的接枝效率(可达90%以上)。探讨了引发剂浓度、单体浓度、反应温度对接枝参数的影响,结果表明:当c〔Ni(Ⅳ)〕=8×10-4mol/L,c(MA)=1 5mol/L,θ=35℃时,接枝效率和接枝百分比可达到最高值。用红外光谱、X射线衍射、扫描电镜对接枝共聚物进行了表征,提出了建立在镍(Ⅳ)还原为镍(Ⅱ)的过程为两步单电子转移的基础之上的引发机理。将所得接枝共聚物用作尼龙/聚甲基丙烯酸甲酯体系的增容剂,通过扫描电镜分析表明:该共混体系的相容性得到一定程度的改善。     

活性炭纤维制备双电层电容器

研究了不同材料、比表面积和电解液对比电容的影响,不同比表面积,电解液对循环充电稳定性的影响。结果表明,作为制备双电层电容器的电极材料,活性炭纤维明显好于活性炭,同样基质的活性炭纤维,比表面积大的,比电容不一定大。