The rate of corrosion of concrete reinforcement and possibilities of its mathematical modelling

The paper describes a method for the mathematical modelling of steel reinforcement corrosion rate. This method is based exclusively on experimental results and expression of the influence of significant corrosion factors in the form of functional relations. The method takes into account the reality of the effects of corrosion factors, their contigency and complexity, and various circumstances occurring in practice. It represents one way towards the development of methods for the prediction of service life of reinforced concrete and structures.     

Two- or three-stage least squares?

Two elements enter the choice between 2 and 3SLS for full-system estimation: statistical efficiency and computational cost. 2SLS always has the computational edge, but 3SLS can be more efficient, a relative advantage that increases with the strength of the interrelations among the error terms. A measure of these interrelations is thus helpful in making the choice, and, when there are only two equations, this has suggested using a high pairwise error correlation as an indicator of when to use 3SLS. In larger systems of equations, however, these pairwise correlations can remain small even though more general interrelations give 3SLS the relative advantage. More general indicators are therefore needed, and this paper suggests three such and demonstrates their efficacy.Professor of Economics, Boston College, and Principal Research Associate, Center for Computational Research in Economics and Management Science, MIT. All computation was done on the TROLL system at MIT. My thanks go to Josh Charap for his able research assistance. This research was sponsored in part by the National Science Foundation under grant #IST-8420614.     

基于熵权的料场方案模糊多属性优选研究

砂石料场方案选择中存在着许多难以精确度量的模糊性因素，常规的平衡法、系统分析法很难对此进行有效的处理。将模糊数学理论应用于砂石料场的方案选择，提出了熵权与模糊理论相结合的砂石料场方案优选方法，重点对标准化属性矩阵的产生、主客观权重结合得到综合权重及相对接近度的计算等几个方面进行了说明，并通过实例验证了该方法的可行性与实用性。     

用热失重法确定水合粘土水分含量及存在形式

文章以蒙脱土为例，采用热失重法定性定量确定了水合粘土中结合水类型、界限及其相对含量，并与等温吸附法结果进行了对比。结果表明，用该方法得到的水合蒙脱土中各种水分的相对含量及总含水量与等温吸附实验结果相一致。热失重（25~250 ℃）分析结果表明，水合蒙脱土中水分子主要存在自由水、松散吸附结合水、紧密吸附水（强吸附结合水）3种状态，分别对应于25~75 ℃、75~120 ℃、120~230 ℃区间里的失水。从热失重（25~250 ℃）规律来看，仍存在两个明显的转折点p/ps=0.9、0.98，它们为粘土-水体系的两个特征湿度，前者为粘土表面强结合水与松散结合水（渗透结合水）之间的界限，后者为松散结合水与自由水之间的界限，这验证了等温吸附法确定的两个特征湿度及对粘土表面结合水界限划分的正确性。     

2#板坯连铸机振动台故障分析及改造

论述了银山型钢有限公司炼钢厂2#板坯连铸机自投产以来其振动台存在的问题，根据实际情况分析论证并进行改造实施，实施后效果明显。     

Estimation of errors of hydrogen standard time scale preservation taking account of systematic frequency changes

Metrological characteristics of active hydrogen frequency standards are investigated on the basis of internal and external comparisons. The stability of random changes and drift of hydrogen frequency standards and also the potential capabilities of time scale preservation with effective consideration of systematic changes in their frequency are demonstrated. __________ Translated from Izmeritel’naya Tekhnika, No. 3. pp. 42–45, March, 2007.     

整体毡纤维体积分数对CVD增密的影响

将3组不同纤维体积分数的整体毡采用等温CVD进行沉积热解炭增密,结合CVD沉积过程中整体毡内气体传质数学模型,研究了整体毡的纤维体积分数对CVD增密过程的影响,研究结果表明:纤维体积低的整体毡沉积时增重率高;纤维体积分数高的整体毡容易获得较高密度的C/C复合材料;纤维体积分数超过35％的整体毡经过300 h的化学气相沉积,坯体的体积密度能达到1.52 g/cm~3。     

一种8毫米波变张角,半径突变多模圆锥馈源

我们研制了一种8毫米波变张角、半径突变的多模圆锥馈源。计算出其模比并推导出其辐射方向图公式;给出其在两个主平面——E平面与H平面上的辐射方向图和波束场分布特性的测试结果以及电压驻波比VSWR的测量结果;同时给出频带和旁瓣特性。分析与测试共同表明,在34.5GHz～37GHz频带里,该多模馈源的辐射图在大于24dB范围内获得幅度等化且不出现旁瓣,因此具有一定的应用价值。     

用测井资料预测储层的润湿性

岩心电性及润湿性实验测量结果表明，润湿性对阿尔奇饱和度指数n有很大影响。通过引入相对润湿指数，发现阿尔奇饱和度指数n的对数与相润湿指数之间存在很好的线性关系，为利用饱和度指数预测储层的润湿性提供了依据。同时使用电磁波传播测井和微球形聚焦电阻率测井求出饱和度指数随地层深度的变化曲线，预测储层的润湿性。现场井资料处理结果表明，该方法能快速直观显示不同深度处储层润湿性的变化。     

NaI多道脉冲幅度分析系统在燃料元件破损监测中的应用研究

介绍了船用堆燃料元件破损监测中较常用的两种方法.通过分析其缺陷,提出了用NaI多道脉冲幅度分析系统测量特征核素(131I、137Cs)的方法,有效避免了监测中的干扰因素的影响,降低了定量监测中的误报率,提高了燃料元件破损监测的效率和置信度.