Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.     

蒸发式空冷器的运行实践

通过了解蒸发式空冷器的工作原理和结构,在运行实践过程中,对组成设备出现的问题提出相应的解决方案,并对部分组成设备提出改进的建议,以方便检修和维护,并提出了在冬季长时间高炉休风情况下保证水温不下降过低的解决方案。     

Polyethylene mixed crystal infra-red spectroscopy: The influence of matrix isotopic species on guest conformation

The chain conformation of solution-crystallized polyethylene has previously been confirmed by infra-red spectroscopy, using the CD₂ bending bandshape for samples with a minority of the deuterated species^1–3. The method of calculating the i.r. band profile from molecular conformational models is now developed to give a more accurate representation of doublet splittings and to include the singlet component. The CH₂ bending profile is calculated for samples with a deuterated matrix, and the good agreement with experimental data indicates that the same molecular model is applicable for samples with the deuterated polymer as either guest or matrix, for identical crystallization conditions. This result implies that isotopic fractionation is unimportant under these conditions.     

溶聚丁苯橡胶聚合溶液粘度的研究

研究了（乙二醇二甲醚、二乙二醇二甲醚）－正丁基锂－抽余油体系地溶聚乙苯橡胶不同聚合时间聚合溶液粘度的变化，发现聚合溶粘度与活性种的活性有关，高温严重破坏活性种的活性，计节剂量是杀死活性种活性的另一因素。同时考察了不同苯乙烯／丁二烯（S／B）体系，正丁基锂引发剂用量对聚合粘影响规律，发现S／B越大，聚合粘度越小，S／B越小，聚合粘度越大，引发剂用量减少，聚合液粘度增大。     

EMD与KOH溶液的相互影响

利用滴定分析、热失重分析以及XRD方法研究了EMD和KOH溶液混合后的变化。结果表明:碱与MnO2可以相互作用并导致体系温度的升高,碱浓度的下降,EMD中形成Mn3O4以及MnO2中结合水的损失。相互作用的结果与所加KOH溶液的浓度、EMD中的水含量、二者用量的比例关系以及体系的温度有关。     

西安脉冲堆计算值和实测结果分析

介绍了西安脉冲堆堆芯布置、计算模型和程序以及计算值与实验测量结果分析。西安脉冲堆在满功率（2MW）下连续运行了72小时，证明西安脉冲堆整个系统和设备是良好的、安全可靠的。根据西安脉冲堆计算值与测量值的比较，证明计算程序可靠，具有较高精度。西安脉冲堆理论计算值与实验测量值符合较好，完全满足工程设计要求，实验测量结果达到了设计指标的要求。     

Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

带有集中质量的分布质量弹性转动横振精确解

求得了带有集中质量的分布质量弹性转轴系统横向自由振动的频率方程和振型函数的精确解析表达式，及其与不转动轴系统自由振动的频率方程和振型函数及转动角速度之间的精确解析关系     

氨荒酸盐抑制铜在NaCl溶液中腐蚀的电化学研究

通过电化学极化曲线和失重实验,研究了氨荒酸盐对铜在氯化钠溶液中的缓蚀性能,并与相应胺的缓蚀性能进行了对比。结果表明:氨荒酸盐对铜具有较好的缓蚀性能。     

TRT入口方管道爆裂原因剖析

介绍了鞍钢7#高炉TRT装置入口方管道爆裂事故经过,进行了原因分析,并提出了解决措施。