Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

Synthesizing plans that contain actions with context-dependent effects1

This paper presents a method of solving planning problems that involve actions whose effects change according to the situations in which they are performed. The approach is an extension of the conventional planning methodology in which plans are constructed through an iterative process of scanning for goals that are not yet satisfied, inserting actions to achieve them, and introducing subgoals to these actions. This methodology was originally developed under the assumption that one would be dealing exclusively with actions that produce the same effects in every situation. The extension involves introducing additional subgoals to actions above and beyond the preconditions of execution normally introduced. These additional subgoals, called secondary preconditions, ensure that the actions are performed in contexts conducive to producing the effects we desire. This paper defines and analyzes secondary preconditions from a mathematically rigorous standpoint and demonstrates how they can be derived from regression operators.     

基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

影响聚合物段塞流变性因素的研究

本文针对我国表面活性剂/聚合物驱油的实际,研究了石油磺酸盐(PS)、正丁醇(R_4OH)和矿化水对水解聚丙烯酰胺(HPAM)溶液流变性的影响。结果表明,PS对HPAM溶液流变性的影响与介质的矿化度有关:非矿化水介质中,PS对HPAM溶液性质的影响类似于无机盐,能降低HPAM溶液的表现粘度(η_α)和稠度系数(k);当系统中含有一定浓度矿化水时,PS却能升高系统的η_α和k值,降低流型指数(n),使系统的非牛顿性增强。在含有PS和矿化水的HPAM系统中加入R_4OH,系统的η_α和k值会有所增加。     

Boussinesq方程的永形波的级数解

对于用层平均速度势(或速度)与波高给出的非线性等水深Boussinesq方程,与KdV方程一样,存在两类永形波—孤立波和周期波。不同的是,对于Boussinesq方程,孤立波和周期波一样,是以反函数的积分形式给出的,这在使用上是不方便的。本文对这两类波,分别给出了相应的级数形式的正函数解。对于孤立波,级数的收敛速度是十分快的,且文中还给出了一个具有高精度的十分简单的近似解,对于周期波,只要有关参数选得合适,解的收敛速度也是相当快的。这就有效地克服了反函数形式解在使用上的不方便。     

Liquid–liquid extraction of a recombinant protein with reverse micelles

Recombinant cytochrome b₅ was extracted into the reversed micelle phase of an anionic surfactant (AOT) in octane and back-extracted to a final aqueous phase. The extraction of the protein was controlled by an electrostatic mechanism, since it was dependent on the global charge of the protein. This was directly demonstrated by experiments with native and mutant cytochromes obtained by site directed mutagenesis. The back-extraction of cytochrome b₅ to a fresh aqueous phase was decreased by factors that reduced the size of the water pool of the organic phase, such as high salt concentrations (1–2 mol dm^?3 NaCl) and low temperatures (4°C), probably because of an increase in a favourable interaction of this protein with the surfactant at closer distances.     

痕量分析中金溶液的稳定性

评述了痕量分析中,金标准溶液和天然水试样中痕量金贮存的稳定性及影响贮存的重要因素,提出了标准溶液配制和贮存的方法。     

红外警戒系统作战环境的计算机仿真

文中论述了红外警戒系统视景仿真研究的主要内容，给出了仿真软件流程。探讨了满足红外警戒系统全方位、多目标视景生成的实时性方法。     

发电机同轴励磁机电刷火花过大的原因及处理方法

本文对发电机同轴励磁机电刷火花过大的原因进行了分析．并针对这些原因提出了相应的处理办法。对规范励磁机的运行维护有很大的帮助。     

压缩奇偶相干态的熵压缩特性

用数值方法讨论了相干态强度、相位角和压缩参数对压缩奇偶相干态位置熵和动量熵压缩特性的影响。结果表明，压缩奇偶相干态的位置熵和动量熵均可呈现压缩性，压缩偶相干态的最大熵压缩度比压缩奇相干态的要大。熵压缩度与相干态强度、相位角和压缩参数均有关系，但压缩因子对场熵压缩的影响最大。当其它条件一定时，压缩偶相干态在压缩参数|β|=O．95时，位置熵(或动量熵)的压缩度最大，但压缩奇相干态无此特点。