对等张力链条机构设计的再思考

为解决震源在振动器提升后链条与销轴的断裂问题,应采用等张力原理对链条提升机构进行改进设计。经野外实践证明,这种机构基本上能够满足野外工作的要求。本文对目前所采用的机构形式可能存在的改进设计进行了分析。     

起重机吊钩拖动绕线电动机他励双高调速系统

本文提出励磁电流可自动控制的他励式双高调速系统设计方案。系统在提升特别是在下放重物时，具有较硬的机械性；在负载１０－１００％的变化范围内，可实现最大偏差Δｎｍａｘ／ｎｍｉｎ１００％≤１０％，调速范围Ｄ≥１０；在满载运行条件下，可节约电能８０％以上。     

PAA-PSF交联复合膜的制备及对低浓度有机醇水溶液反渗透分离性能研究

进行了ＰＡＡ（ＰｏｌｙａｃｒｙｌｉｃＡｃｉｄ）－ＰＳＦ（Ｐｏｌｙｓｕｌｆｏｎｅ）交联复合膜的制备，研究了交联剂、添加剂对膜性能的影响，并通过扫描电镜观察了膜的断面结构．研究了ＰＡＡ－ＰＳＦ交联复合膜对低浓度有机醇类水溶液反渗透分离性能．发现对于１０００×１０－６乙醇水溶液截留率达到６６．２％，透过流束可达０．９×１０－６（ｍ３·ｍ－２·ｓ－１）．随醇的分子量的增加，截留率不断上升，对戊醇的截留率达９４．３％，而透过流束则保持相对稳定．对不同结构醇类的分离性能研究表明，截留率存在有：ｔｅｒｔ－＞ｓｅｃ－＞ｉｓｏ－＞ｎ－的规律．     

APPLICATION OF THE POLYMERASE CHAIN REACTION TO THE RAPID ANALYSIS OF BREWERY YEAST STRAINS

The rapid discrimination of closely-related Saccharomyces cerevisiae strains can pose a significant problem to breweries, in particular where closely related strains are being used simultaneously to manufacture different products. In this study, two PCR approaches have been examined to assess their usefulness for the discrimination of brewery ale and lager yeast strains. PCR using arbitrary primers (RAPD PCR) was found unsuitable for such an application since the DNA profiles generated from brewery strains were generally found to be identical, due presumably to the close genetic relatedness of these yeasts. In contrast, PCR using δ sequence primers could rapidly differentiate between many ale and lager strains and characteristic profiles for these were generated. This method could also be applied directly to yeasts isolated from brewery worts or from active dried yeast preparations. Results of such analyses were available within the working day.     

转炉炼钢静态模型的初步探讨

根据转炉炼钢的物理化学反应机理，从质量平衡和能量平衡的计算出发，通过小参数变动，导出了增量式静态模型中矿石方程和供氧方程的系数。所得结论与新日铁资料基本相符。同时，还进行了炉料和产物的计算，分析了改变废钢比对生产的影响。     

浅议铝箔项目的给排水设计

通过铝箔项目的工程实例,详细介绍了铝箔项目给排水专业设计的主要构成,并总结了几点设计体会,可供有关专业设计人员借鉴、参考。     

给水铜管分水布置的支管缩径可行性分析

住宅给水铜管分水布置是一种技术可行、经济合理的管道布置方式。在确定了管道的设计要求后,分析了分水缩径后的流速情况,明确了分水布置方式中支管缩径的技术状况。分析表明,支管缩径是可行的。     

网格曲面中孔洞的光滑填充算法研究

三角网格模型是几何描述的一种重要形式，有着广泛的应用。但三角网络模型常常会存在孔洞缺陷。这些孔洞的存在一方面影响视觉效果，另一方面会影响许多后续的操作，如快速原型制造、有限元分析等，因此有必要对这些孔洞进行修补。目前绝大多数孔洞填充算法是将网格模型中的孔洞提取成空间多边形，并对孔洞多边形进行三角化。这种处理方法的主要缺陷是没有考虑网格曲面在孔洞附近的几何形态，因而填充部分不能与整个曲面光滑地融为一体。笔者提出了一种三角网格曲面中孔洞的光滑填充算法。该算法根据孔洞周围网格曲面的几何信息来增加孔洞内部的采样点，然后再对增加的采样点进行三角化，较好地解决了填充部分与整体曲面光滑连接的问题。     

个人剂量仪两种电源电路设计的比较

个人剂量仪器一般要求采用电池供电，并且希望电池使用的时间越长越好，随着电池电压的降低，仪器的一些性能也会下降，合理的电源设计会延长电池的使用寿命，也能提高仪器性能，介绍了电池直接供电和采用电源芯片转换供电两种方法，并结合个人剂量仪主要进行了仪器功耗，电池使用寿命的比较，也进行了仪器其它性能，仪器成本，体积等方面的比较，通过比较结果，可根据仪器的实际要求来选择电源电路设计的方法。     

A coordinated reverse logistics system for regional management of multi-source hazardous wastes

This paper presents a coordinated reverse logistics (CRL) management system for the treatment of multi-source hazardous wastes in a given region, in this case, a specific high-technology manufacturing zone. A linear multi-objective analytical model is formulated that systematically minimizes both the total reverse logistics operating costs and corresponding risks. In addition to inter-organizational logistics operating factors, environmental concerns are considered and formulated as corresponding risk-related constraints. Using the proposed model, results of numerical studies indicate that when the aspect of risk-induced penalties is not considered, the operational costs of regional hazardous-waste management can be efficiently reduced by 58%, compared to the existing operational costs at the study site. In addition, it is also observed that the corresponding weight associated with the risk-induced objective function embedded in the proposed model seems to have a significant effect on the CRL costs.