Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

纤维表面处理对植物纤维增强水泥的物理力学性能影响

植物纤维增强水泥的力学性能具有湿敏感性，随湿度增加弯曲强度下降幅度较大。本文工作采用的几种浸渍处理纤维表面的方法，有效地改善了这种状况，其中一种经处理的纤维增强水泥较没有处理的对比试样在饱水状态下的弯曲强度提高了67％，气干状态提高了18％，缩小了二者间的差距。     

莱钢冷轧轧机弯辊控制系统分析

对莱钢冷轧六辊单机架的弯辊系统进行研究与分析,介绍板形控制系统的原理和使用效果。     

基于CAE的平流式换热器无模成型工艺开发

为实现高效的平流式换热器柔性弯曲制造,避免模具对制品的损伤,采用仿真与试验相结合的方法实现平流式换热器无模弯曲工艺开发.与传统的换热器绕弯成型技术相比,该成型过程无须弯曲模,而是通过控制换热器两端的运动轨迹实现弯曲成型,改变相应的运动轨迹能实现不同的弯曲半径.在成型原理分析的基础上,建立无模弯曲成型过程的有限元仿真模型,并基于仿真结果确定合理的弯曲速度、夹头长度和中性层半径等工艺参数.设计并制造无模弯曲成型试验装置,并研究翅片结构等因素对成型质量的影响.     

REVERSED RESIDUALS IN AUTOREGRESSIVE TIME SERIES ANALYSIS

Abstract. Both linear and non-linear time series can have directional features which can be used to enhance the modelling and investigation of linear or non-linear autoregressive statistical models. For this purpose, reversed p th-order residuals are introduced. Cross-correlations of residuals and squared reversed residuals allow extensions of current model identification ideas. Quadratic types of partial autocorrelation functions are introduced to assess dependence associated with non-linear models which nevertheless have linear autoregressive correlation structures. The use of these residuals and their cross-correlation functions is exemplified empirically on some deseasonalized river flow data for which a first-order autoregressive model is a satisfactory second-order fit. Parallel theoretical computations are undertaken for the non-linear first-order random coefficient autoregressive model and comparisons are made. While the data are shown to be strongly non-linear, their correlational signatures are found to be convincingly different from those of a first-order autoregressive model with random coefficients.     

单束纤维增强树脂基复合材料的热水老化性能研究

在96℃水中,对开芙拉29(Kevlar29),开芙拉49(Kevlar49)和聚苯撑苯并唑(PBO)纤维束增强的环氧树脂和双马树脂基复合材料进行老化实验后,再在60℃下进行干燥脱水处理。实验测定了吸水和脱水阶段的含水率及热水老化试样和干燥试样的弯曲性能。结果表明:在热水作用下,复合材料的弯曲强度和模量随热水老化时间的延长呈下降趋势,纤维与树脂基体间的界面发生破坏;再干燥脱水后,材料的弯曲强度和模量恢复,但仍低于未老化试样的性能,纤维与树脂基体间的界面破坏情况也类似。     

考虑初始弯曲矩形薄壁钢管砼柱管壁屈曲分析

实际工程中的钢管都是有初始弯曲的,初始弯曲的存在会降低薄壁钢管混凝土柱的承载力.采用能量法对具有初始弯曲管壁的屈曲性能进行了分析,分析结果表明,初始弯曲的存在会使管壁的宽厚比降低30%左右.     

Engineering of functional supramacromolecular complexes of proteins (enzymes) using reversed micelles as matrix microreactors

The size of the inner water cavity of reversed micelles formedin a triple system ‘water-surfactant-organic solvent’can be widely varied by changing the degree of surfactant hydration.This gives grounds to use reversed micelles as matrix microreactorsfor the design of supramolecular complexes of proteins. Usingultracentrifugation analysis, it has been demonstrated thatthe oligomeric composition of various enzymes (ketoglutaratedehydrogenase, alkaline phosphatase, lactic dehydrogenase, glyceraldehyde-3-phosphatedehydrogenase) solubilized in reversed micelles of Aerosol OT[sodium bis(2-ethylehexyl)sulfosuccinate] in octane changesupon variation of the degree of hydration. An oligomeric complexforms under conditions when the radius of the micelle innercavity is big enough to incorporate this complex as a whole.At lower degrees of hydration the micelles ‘uncouple’such complexes to their components. The catalytic propertiesof various oligomeric complexes have been studied. Possibilitiesof using reversed micelles for the separation of subunits ofoligomeric enzymes under non-denaturating conditions have beendemonstrated. In particular, the isolated subunits of alkalinephosphatase, lactic dehydrogenase and glyceralde-hyde-3-phosphatedehydrogenase have been found to be active in Aerosol OT reversedmicelles. The dependences of the catalytic activity of oligomericenzymes represent saw-like curves. The maxima of the catalyticactivity observed at these curves relate to the functioningof various oligomeric forms of an enzyme. The radii of the micelleinner cavity under conditions when these maxima are observedcorrelate with the linear dimensions of the enzyme oligomericforms. Correlation of the position of a maximum with the shapeof an oligomeric complex is discussed.     

冰箱门面板冲压工艺分析及模具设计

分析冰箱门面板的冲压工艺,介绍模具设计中应注意的问题及滚压式结构的特点     

板料弯曲回弹的有限元模拟影响因素研究

阐述了板料成形数值模拟中回弹问题的研究历史和发展现状,分析了塑性弯曲加工中工件发生弯曲回弹的原因、特点及有限元模拟过程的影响因素,总结了回弹模拟的算法,从成形过程模拟和回弹计算两方面系统分析了影响回弹模拟准确性和收敛性的主要因素及改进方向,讨论了模具设计中回弹的补偿算法 ,并提出了当前控制回弹的基本方法