一种可降解PBAT复合材料相容剂的合成及应用

以扩链剂ADR4370S 和硅烷偶联剂KH550为原料，合成了一种含硅相容剂（K-ADR）并应用于滑石增强PBAT基复合材料中。采用FTIR、1HNMR、TGA对K-ADR的结构进行了表征，通过转矩流变仪制备PBAT/K-ADR/滑石体系复合材料，并对复合材料的流变性能、力学性能、冲击断面微观形貌和元素分布进行了表征。结果表明，当相容剂K-ADR添加质量是体系质量的6‰时，PBAT/K-ADR/滑石复合材料拉伸强度、冲击强度和弯曲模量分别为19.11MPa、67.68KJ/m2和378.36MPa，相比于纯PBAT样品分别提高了5.3%、110.7%和346.7%。复合薄膜的水蒸气透过率系数（WVP）为5.70×10-12g·cm/cm2·s，氧气透过率系数（OP）为3.17×10-13cm3·cm/(cm2·s·Pa)，分别降低为纯PBAT样品的2.1％和1.0％。     

Peroxide crosslinking of rigid poly(vinyl chloride)

The optimum conditions for crosslinking rigid poly(vinyl chloride) with trimethylolpropane trimethacrylate (TMPTMA) and peroxide have been examined. The extent of crosslinking was measured by determining gel content by Soxhlet extraction in tetrahydrofuran. Mechanical properties were measured at 130°C and dynamic viscoelastic measurements were carried out to detect changes in the glass transition temperature (T_g). It was found that 15 phr of TMPTMA and 0.3 phr of peroxide were optimum concentrations for maximizing the extent of crosslinking, tensile strength, and T_g. The lower molding temperature of 170°C was preferred to minimize thermal degradation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2904–2909, 2007     

Dependence of the Microstructure and the Electrical Properties of Lanthanum-Substituted (Na1/2Bi1/2)TiO3 on Cation Vacancies

The sintering and electrical characteristics of La-modified Na_1/2Bi_1/2TiO₃ (NBT) was investigated from a defect structure viewpoint. To reveal the role of cation vacancies, two series of ceramics, with different cation vacancies, were processed to compensate the excess positive charge of lanthanum ions. In a region of complete solid solution, the grain size of NBLT-B {[(Na_0.5Bi_0.5)_{1− x} La _x ]Ti_{1−0.25 x} O₃} was smaller than that of NBLT-A {[(Na_0.5Bi_0.5)_{1−1.5 x} La _x ]TiO₃} and densification was enhanced more effectively in NBLT-B. With the aid of thermoelectric power, electric conductivity, and electrotransport measurements, it was found that different sintering behaviors between NBLT-A and NBLT-B specimens were related to the change in the type of cation vacancies present and that lanthanum ion–cation vacancy pairs played an important role in reducing the grain growth and enhancing the densification process.     

国产SEBS流变性能评价

通过对国产SEBS(氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物)流变性能进行测试．分析不同结构、不同嵌段的S／B质量比值、不同相对分子质量、不同加工温度对SEBS产品流变性能的影响．促进用户对国产SEBS性能的了解。     

Structural and Mechanical Properties Changes of Ethylene‐α‐olefin Copolymer Blends Induced by Thermal Treatments and Composition

Summary: Blends of single‐site catalysed ethylene‐α‐butene (C₄VLDPE) and ethylene‐α‐octene (C₈VLDPE) copolymers were prepared by melt extrusion. The phase morphology, thermal and mechanical properties of the blends have been investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), tensile test and dynamic mechanical analysis (DMA). Depending on the composition and thermal history, significant differences in structure and behaviour were found. It was also found that some degree of co‐crystallization occurred for quenched blends; whereas most of the oven slowly cooled blends showed two well‐defined melting peaks, indicating that the slow cooling favoured partial segregation of the fractions with different degrees of branching to form two morphologies. Moreover, SEM revealed morphology of the thinner crystals distributed in‐between the thicker sheaf‐like crystals for the slowly cooled blends with 20–50% C₈VLDPE. Therefore, the synergism in mechanical properties for the blends with 20–50% C₈VLDPE is due to a combination of larger crystal size, more complete phase separation and interfacial interaction produced by the segregation effect of the slow cooling treatment. DMA studies showed that the storage modulus increased as the addition of C₈VLDPE and modulus for the slowly cooled blends are about twice those measured for the quenched ones, indicating higher stiffness of the blends. The smooth shift of β relaxation temperature with addition of C₈VLDPE for both sets of blends confirmed the miscibility in the amorphous phase.

SEM image of the C₄VLDPE‐C₈VLDPE (50/50) blend after oven slow cooling treatment.     

Dynamic mechanical properties and morphology of high‐density polyethylene/CaCO3 blends with and without an impact modifier

Dynamic mechanical analysis and differential scanning calorimetry were used to investigate the relaxations and crystallization of high‐density polyethylene (HDPE) reinforced with calcium carbonate (CaCO₃) particles and an elastomer. Five series of blends were designed and manufactured, including one series of binary blends composed of HDPE and amino acid treated CaCO₃ and four series of ternary blends composed of HDPE, treated or untreated CaCO₃, and a polyolefin elastomer [poly(ethylene‐co‐octene) (POE)] grafted with maleic anhydride. The analysis of the tan δ diagrams indicated that the ternary blends exhibited phase separation. The modulus increased significantly with the CaCO₃ content, and the glass‐transition temperature of POE was the leading parameter that controlled the mechanical properties of the ternary blends. The dynamic mechanical properties and crystallization of the blends were controlled by the synergistic effect of CaCO₃ and maleic anhydride grafted POE, which was favored by the core–shell structure of the inclusions. The treatment of the CaCO₃ filler had little influence on the mechanical properties and morphology. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3907–3914, 2007     

Morphology and thermal stability of BR/clay composites prepared by a new method

A new potential preparation method named in situ organic modification was used to prepare intercalated polybutadiene rubber (BR)/clay/dimethyl dihydrogenated tallow ammonium chloride (DDAC) composites. That is, BR, pristine clay, and intercalatant DDAC were directly mixed in a Haake rheometer without pretreating the pristine clay with the intercalatant. The morphology of the BR/clay composites was investigated by means of X‐ray diffraction and scanning electron microscopy. The thermal stability of the BR/clay composites was analyzed by thermogravimetric analysis (TGA). The dispersion of clay particles in the BR/clay/DDAC composites is much better than that in the BR/pristine clay and similar to that in the BR/organoclay DK4 (modified with DDAC) composites. BR/clay/DDAC composites have much higher thermal stability than the gum BR, BR/pristine clay, and BR/DK4 composites. The clay/intercalatant ratio has little influence on the thermal stability of the BR/clay/DDAC composites, while clay content has a significant effect on their thermal stability. The enhanced thermal stability of the BR/clay/DDAC composites is related to the dispersion state of clay particles in BR. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 905–913, 2006     

Properties of chitosan‐based biopolymer films with various degrees of deacetylation and molecular weights

An increase in the depolymerization of chitosan was found with an increased concentration of sodium perborate. Acetic anhydride was added to reacetylated chitosan in a molar ratio per gulcosamine unit, and the amide I band of IR spectra changed with the addition of acetic anhydride. Sixteen chitosans with various molecular weights (MWs) and degrees of deacetylation (DODs) were prepared. X‐ray diffraction patterns indicated their amorphous and partially crystalline states. Increases in the chitosan MW and DOD increased the tensile strength (TS). TS of the chitosan films ranged from 22 to 61 MPa. However, the elongation (E) of chitosan films did not show any difference with MW. TS of chitosan films decreased with the reacetylation process. However, E of chitosan films was not dependent on DOD. The water vapor permeabilities (WVPs) of the chitosan films without a plasticizer were between 0.155 and 0.214 ng m/m² s Pa. As the chitosan MW increased, the chitosan film WVP increased, but the values were not significantly different. Moreover, the WVP values were not different from low DOD to high DOD. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3476–3484, 2003     

Sintering of the Mechanochemically Activated Powders of Hexagonal Boron Nitride

Pressureless sintering of hexagonal boron nitride (BN) was performed using a powder activated by mechano-chemical treatments. Physical properties of the sintered BN bodies depend on the type of starting powder and the conditions of the treatments. The BN body, which was obtained at 2000°C using an appropriate activated powder, was 99 wt% pure and was excellent in mechanical and physical properties, in spite of its low density (1.64 g/cm³).     

多单体熔融接枝天然橡胶及其性能的研究

以甲基丙烯酸缩水甘油酯（GMA）为接枝单体，苯乙烯（St）为接枝共单体，过氧化二异丙苯（DCP）为引发剂，通过熔融接枝法制备接枝天然橡胶[NR-g-（GMA-co-St）]。研究了GMA、St及DCP用量和接枝温度对NR的接枝率及其力学性能的影响。结果表明，GMA、St和DCP质量分数分别为8％、4％和0．3％，接枝温度为160℃时，NR-g-（GMA—co—St）的接枝率最高，综合力学性能最好；St的加入能明显提高NR的接枝率，并能减轻NR的降解；红外光谱的分析证实了GMA已接枝到天然橡胶分子链上。