基于SPOT-5多光谱影像的矿区塌塘水体提取方法研究

针对基于遥感影像的水体提取方法存在水体提取不完整和误提的现象,提出了一种基于SPOT-5多光谱影像的矿区塌塘水体提取方法。在利用波段合成增加一个可用波段的基础上对已有的水体提取方法进行适当的改进,并基于决策树分类器和改进后的方法进行矿区水体的四级提取,保证了水体提取的完整性,同时减少了误提率;最后利用实测数据对水体提取的精度进行了评定。试验结果表明,基于决策树分类器的水体提取方法具有较高的精度,能满足矿区实际应用的需要。     

一种制做三维牙——颌骨光弹性模型的新方法

本文提出一种用“整体浇注法”制做三维牙——颌骨光弹性模型的新方法,即用价格便宜的石膏做阴模,先制出与真实牙几何相似的牙光弹性模型和模拟牙周膜的乳胶套,将它们粘接好,然后将其放入颌骨石膏阴模的适当位置,浇入环氧树脂混合液,用“二次固化法”进行固化,即可制成三维牙——颌骨整体光弹性模型。此法能保证模型与实物的严格几何相似和牙周的边界条件相似,使实验精度大大提高且工艺简单、成本低。     

A novel approach for fit analysis of thermal protective clothing using three-dimensional body scanning

The garment fit played an important role in protective performance, comfort and mobility. The purpose of this study is to quantify the air gap to quantitatively characterize a three-dimensional (3-D) garment fit using a 3-D body scanning technique. A method for processing of scanned data was developed to investigate the air gap size and distribution between the clothing and human body. The mesh model formed from nude and clothed body was aligned, superimposed and sectioned using Rapidform software. The air gap size and distribution over the body surface were analyzed. The total air volume was also calculated. The effects of fabric properties and garment size on air gap distribution were explored. The results indicated that average air gap of the fit clothing was around 25–30 mm and the overall air gap distribution was similar. The air gap was unevenly distributed over the body and it was strongly associated with the body parts, fabric properties and garment size. The research will help understand the overall clothing fit and its association with protection, thermal and movement comfort, and provide guidelines for clothing engineers to improve thermal performance and reduce physiological burden.     

基于机器人三维模拟仿真的焊接生产线柔性主拼技术研究

为满足生产线柔性设计需求, 对柔性焊接生产线解决方案的难点进行了分析, 提出了基于机器人三维模拟仿真的生产线柔性主拼技术方案, 建立了机器人负载边界模型和基于负载边界模型的机器人选型及快换装置选型方案, 提出了网格式夹具设计方法, 以白车身柔性焊装生产线为例, 建立了面向柔性的网格式夹具设计方案以及网格式装配检测及应力分析, 并对面向柔性主拼中的离线编程技术及三维仿真中的项目权限管理和工作站模拟仿真工作流程进行了分析。该方案在某汽车厂NL-1&NL-2两个车型项目生产线的设计中应用焊接生产线上进行了应用验证, 能满足两车型生产线柔性主拼的需求。     

无线体域网技术研究现状与展望

无线体域网(WBAN)技术是当前重要的研究热点,可以应用于医院内患者实时监测和家庭健康护理领域,具有广泛的应用前景和巨大的市场潜力。WBAN对设备的可穿戴性和数据传输的可靠性、安全性提出了更高的要求,技术发展中存在一些需要深入研究和解决的问题。对WBAN关键技术的研究现状和产业化进展进行了综述,并对WBAN技术的未来研究和发展前景进行了展望。     

型腔体组件装配尺寸检测技术分析与运用

为解决型腔体组件装配尺寸的检测问题,以某枪型的型腔体组件为例,分析该型腔体组件的结构特点,设计组合型检测装置,实现准确检测目的.归纳总结了型腔体组件装配尺寸检测技术运用过程中检测装置的设计要领,采用设计与被测型腔体组件相匹配的组合型检测装置,有效解决了型腔体组件装配尺寸检测过程中的定位困难、操作繁琐、检测准确性差等问题.该检测技术对确保型腔体组件装配尺寸的检测稳定性、检测可操作性、检测准确性等方面具有现实的指导意义.     

陶瓷坯体增强剂聚丙烯酸钠在艺术瓷成形过程的应用

本文合成了一系列不同相对分子质量的聚丙烯酸钠,应用于艺术瓷的坯体中,研究了聚丙烯酸钠对艺术瓷坯体强度、变形率的影响,并对聚丙烯酸钠增强机理进行了探讨。结果表明:聚丙烯酸钠可有效地提高艺术瓷坯体的成形强度,减少了坯体的变形率,当增强剂c加入的质量分数为0.6%时,坯体的干燥强度增加率达167.5%,坯体的变形率从50%降低到10%。     

Program Design of Graphic Realism Displaying System Based on DXF Lathe Turning Rotational Parts

For virtually realizing the graphic realism display of DXF machine parts, in AutoCAD2007 graphic drawing environment, an interactive experimental method was taken to realize the display of graphic in DXF, which was taken as the data-exchanged interface and source. Based on depth analysis of DXF data structure, take one drawing of DXF lathe turning rotational part asthe test piece. By VC＋＋6.0 programming, part＇s geometry information could be obtained. Through data processing, 3D data of the test piece could be generated, which is based on 2D data of DXF test piece. Then, OpenGL graphic processing technologies （light, material, texture, map, et al.） were applied on the 3D display of test piece from DXF files or program modules. Finally based on the test report, results of the system functions were shared to prove the realization of system design, and the feasibility of algorithms used. In the developed software, Machine Designers could get a full view of machine parts, and do some proper modifications. The study content and results of our work have some theory and practical significance on the application of program design in the practical projects.