6×××系汽车车身板铝合金的合金化及组织性能的研究

采用力学性能试验和光学金相分析法,研究了Mg和Mn等元素对6×××系汽车板铝合金组织及性能的影响。结果表明:Mg和Mn是提高6×××系汽车板铝合金时效初期硬化值的元素,但对时效初期硬化速度影响不大。提高Mg和Mn含量,合金经170℃30min时效后的强度增大,伸长率降低。合金固溶处理淬火后的晶粒尺寸和形态不随Mg含量而改变,但随Mn含量增加而显著细化。     

A High-Precision Time Handling Library

An appropriate assessment of end-to-end network performance presumes highly efficient time tracking and measurement with precise time control of the stopping and resuming of program operation. In this paper, a novel approach to solving the problems of highly efficient and precise time measurements on PC-platforms and on ARM-architectures is proposed. A new unified High Performance Timer and a corresponding software library offer a unified interface to the known time counters and automatically identify the fastest and most reliable time source, available in the user space of a computing system. The research is focused on developing an approach of unified time acquisition from the PC hardware and accordingly substituting the common way of getting the time value through Linux system calls. The presented approach provides a much faster means of obtaining the time values with a nanosecond precision than by using conventional means. Moreover, it is capable of handling the sequential time value, precise sleep functions and process resuming. This ability means the reduction of wasting computer resources during the execution of a sleeping process from 100% （busy-wait） to 1-1.5%, whereas the benefits of very accurate process resuming times on long waits are maintained.     

Perceptual image preview

Image preview is a convenient way to browse large or multiple images on small displays. However, current signal-level image resampling algorithms may remove many features of interest in the preview image. In this paper, we propose perceptual image preview which retains more perceptual features such that users can inspect features of interest by viewing the preview image only and without zooming in. This technology has two components, structure enhancement and perceptual feature visualization. Structure enhancement enhances the image structure while suppressing subtle details using a gradient modulation method, thus making the succedent perceptual features more apparent. For perceptual feature visualization, features of interest detected in the picture is visualized on the structure enhanced preview image. We demonstrate with two examples of most commonly used image quality features, image blur and noise. The effectiveness of the proposed method is validated by experimental results.     

激光扫描车身测量传感器靶标识别体系的研究

介绍了四光束激光扫描测量车身三维坐标的系统构成和基本原理,从系统PIN预处理输出的靶标回射信号的特点出发,为汽车车身测量传感器设计了基于条形码识别原理的合作靶标识别体系,最多可同时对27个测量点进行有效识别,确保传感器的精度要求和效率要求,达到了很好的实验效果。     

Optimum design of long-span suspension bridges considering aeroelastic and kinematic constraints

Cable supported bridges are wind prone structures. Therefore, their aerodynamic behaviour must be studied in depth in order to guarantee their safe performance. In the last decades important achievements have been reached in the study of bridges under wind-induced actions. On the other hand, non-conventional design techniques such as sensitivity analysis or optimum design have not been applied although they have proved their feasibility in the automobile or aeronautic industries. The aim of this research work is to demonstrate how non-conventional design techniques can help designers when dealing with long span bridges considering their aeroelastic behaviour. In that respect, the comprehensive analytical optimum design problem formulation is presented. In the application example the optimum design of the challenging Messina Strait Bridge is carried out. The chosen initial design has been the year 2002 design proposal. Up to a 33% deck material saving has been obtained after finishing the optimization process.     

基于数字兆欧表自动切换档位的研究与实现

随着电力、电气设备的日益复杂化,对于其安全性能也有了更高的要求,数字兆欧表作为测量绝缘阻值的重要工具,已在工业领域中广泛应用;为了满足测量精度以及兆欧表的可靠性,通过基于S3C2440的嵌入式平台,提出了一种基于数字兆欧表的自动切换档位的实现方案,以达到更加精确的测量;此方案通过判断采集到的电压值选择相应的采样电阻来实现,并结合硬件平台和软件设计,分别介绍了驱动程序和应用程序的编写与测试,并很好地应用到了实际电路中;经测试,能够达到预期的效果,测量精度高,测量误差控制在±2%。     

Physics-Informed Multistage Machine Learning Strategy for the Nanomachining-Induced Plastic Deformation Behavior

The evolution of the dislocation density induced by the nanomachining process dominates the plastic deformation behaviors of materials, thus affecting the mechanical properties significantly. However, a challenging topic related to how to establish an accurate model for predicting the dislocation density based on the limited simulations and experiments arises due to the complicated thermal–mechanical coupling mechanism during the machining process. Herein, a multistage method integrating machine learning, physics, and high-throughput atomic simulation is proposed to investigate the effect of cutting speed on the dislocation behavior in polycrystal copper. Compared with the traditional one-step machine learning method, the constraint of physical features effectively improves the accuracy and generalization ability of the model. The results indicate that the dislocation behaviors depend on the competition between the cutting force and temperature. In the low-cutting speed, the predominated role of the cutting temperature leads to a rapid decline of the dislocation density. In contrast, the dislocation density tends to be stable under a high-speed cutting process due to the dynamic balance between the effects of the cutting force and temperature. Notably, the proposed strategy provides a new and universal framework to design the machining parameters to obtain high-quality products.     

一种测量透明平行平板折射率的新方法

通过测量激光细光束经平行平板玻璃所产生的位移,可确定平行平板的的折射率。本文阐述了该方法的测量原理,给出了测量公式,并详细分析了测量误差。计算机模拟计算结果表明,当平板厚度为50mm时,如果入射角测量标准偏差为1”,平板厚度和光线位移量测量标准偏差均为0.001mm,则折射率测量的标准偏差可达6×10~(-5),此时入射角约55°。     

基于多目视觉的变形钢板三维测量方法

提出了一种使用4个相机测量变形钢板三维形状的方法;在没有纹理的钢板上画一些点,使用4个相机同时拍摄钢板;利用边缘检测算法找出钢板的边缘,利用特征点提取算法提取出4个图像中钢板上的特征点,并找到4个图像上精确的特征点匹配关系,然后测量出这些特征点的三维点;最后,以这些三维点为种子点向外区域增长,从而得到钢板的三维形状;实验对变形钢板进行三维测量,得到了钢板的精确的三维形状,结果验证了该方法的有效性和可行性。     

Measurement of enterprise knowledge by state characterization

Abstract: Enterprise production is becoming more and more knowledge oriented nowadays and knowledge management is playing a key role in making commercial profit and maintaining enterprise competence. Knowledge characterization and measurement are the bases of knowledge management, and this paper aims to develop a method for characterizing and measuring knowledge in a comprehensive and practical way. Knowledge in its static state is modelled as a vector, whose values vary with the situation, and changes in state are modelled as a finite state machine.