甲醇工业发展方向及应用分析

介绍了甲醇的几种重要的下游产品,如甲醛、甲酸甲酯、甲胺等,提出应大力生产和发展甲醇下游产品,并进一步拓宽甲醇的应用领域,加快甲醇应用新技术的开发工作。     

Effect of retempering with superplasticizer admixtures on slump loss and compressive strength of concrete subjected to prolonged mixing

To have concrete possesses the specified engineering properties, its slump loss has to be compensated somehow at construction site so that concrete could be placed and compacted properly. Several attempts have been tried so far to render concrete workable at construction site including starting with a high initial slump at the stationary plant, or retempering with water and/or with chemical admixtures at construction site. In this investigation, ASTM C 494 Type F superplasticizer was used for retempering concrete to restore its initial slump. Concrete mixes having an initial slump of about 19 cm were prepared and subjected to prolonged mixing with different mixing duration such as 30, 60, 90, 120, and 150 min following an initial mixing of 5 min to ensure homogeneity. At the end of each mixing period, cube specimens of 15 cm were cast from concrete retempered to its initial slump level and tested at the age of 28 days for compressive strength. Results revealed that compared to the concrete retempered with water, those retempered with a superplasticizer admixture have yielded significantly higher strength regardless of the mixing duration.     

New Refractories Developed by the Ukrainian Research Institute of Refractories Named after A.S. Berezhnoy

The article gives an introduction to the Ukrainian Research Institute of Refractories and especially its R D and refractory products for the industries of iron and steel,nonferrous,glass and chemistry etc.     

天然胶乳浸渍制品表面起皱的研究

对用化学方法制备的天然胶乳浸渍制品表面起皱进行了研究。分析了天然胶乳浸渍制品表面起皱的原理，确定了起皱剂的选择．同时对影响起皱的因素(增稠剂、预干燥规律)进行了研究。     

农产品质量安全：呼唤深入的交叉研究

论文通过回顾我国农产品质量安全研究背景和评述我国农产品质量安全研究现状,发现我国当前有关农产品质量安全方面深入的交叉研究非常少见.论文指出,对于农产品质量安全这样一个典型的复杂课题,不仅应努力展开跨学科研究,而且需要实现学界、政界和业界的密切合作.     

食用色素对壳聚糖改性纤维染色性能的研究

为了研制符合食品包装要求的彩色防水纸浆模塑制品,选用食用色素对壳聚糖处理后的纸浆纤维进行染色,并在染色纸浆中加入防水剂H,讨论了防水剂质量分数对纸浆纤维防水效果和染色效果的影响。结果表明,染色温度为60℃,染料用量为0.6%(对绝干浆质量),染浴pH=3.5的条件下染色效果较好。结合生产实际,可进行常温染色,上染率达71.43%,褪色率为7.12%。防水剂的加入除能明显提高纸模制品的湿环压强度外还能改善其染色效果,添加量为5%(对绝干浆质量)时,纸模可达到较好的湿环压强度,上染率可提高到79.30%,褪色率降低为0.31%。     

磷渣粉在复合胶凝材料中的水化特性

用扫描电镜、X射线衍射和水化热测定等方法研究了磷渣粉在复合胶凝材料体系中的水化特性,并与Ⅱ级粉煤灰进行对比.结果表明:磷渣粉具有很强的缓凝特性,其缓凝性导致复合胶凝材料体系早期水化慢、强度低,但后期强度高,超过了对比粉煤灰,并存在强度最大时的最佳掺量.早期时磷渣粉可以延缓C3A的水化,AFt的生成明显减少,磷渣粉颗粒表面出现腐蚀痕迹;后期(180d)已找不到磷渣粉颗粒存在,磷渣粉颗粒几乎都全部水化,水化产物非常致密.     

肽类消化吸收方式与机制研究进展

最新研究表明,寡肽可以被小肠直接吸收,但其吸收方式是与氨基酸不同的、相互独立的转运机制。寡肽的特殊载体,通过氢离子和钙离子浓度电导的消耗能量的主动转运系统、具pH依赖性的非耗能性钠离子和氢离子交换系统和谷胱甘肽（GSH）等三种系统进行转运。食物蛋白质的品质、肽链长度与肽的氨基酸组成、生理状况等因素都会影响寡肽的消化吸收。     

矿用产品金属外壳的电磁屏蔽效能分析

对采用单层不锈钢外壳的矿用产品的电磁屏蔽效能进行了分析与计算,得出产品金属外壳的电磁屏蔽效能与采用的金属材质、厚度以及因加工工艺形成的隙缝、开孔有关,为提高矿用产品的电磁屏蔽性能提供了工程经验。     

Compressive strength and hydration of wastepaper sludge ash-ground granulated blastfurnace slag blended pastes

Compressive strength and hydration characteristics of wastepaper sludge ash-ground granulated blastfurnace slag (WSA-GGBS) blended pastes were investigated at a water to binder (w/b) ratio of 0.5. The strength results are compared to those of normal Portland cement (PC) paste and relative strengths are reported. Early relative strengths (1 day) of WSA-GGBS pastes were very low but a marked gain in relative strength occurred between 1 and 7 days and this increased further after 28 and 90 days. For the 50% WSA-50% GGBS blended paste, the strength achieved at 90 days was nearly 50% of that of the PC control paste. Transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermogravimetric (TG) analysis were carried out to identify the mineral components in the WSA and the hydration products of WSA and WSA-GGBS pastes. The principal crystalline components in the WSA are gehlenite, calcium oxide, bredigite and α′-C₂S (stabilised with Al and Mg) together with small amounts of anorthite and calcium carbonate and traces of calcium hydroxide and quartz. The α′-C₂S and bredigite, which phase separate from liquid phase that forms a glass on cooling, are difficult to distinguish by XRD. The hydration products identified in WSA paste are CH, C₄AH₁₃, C₃A.0.5CC?.0.5CH.H_11.5 and C-S-H gel plus possible evidence of small amounts of C₂ASH₈ and C₃A.3CS?.H₃₂. Based upon the findings, a hydration mechanism is presented, and a model is proposed to explain the observed strength development.